I have a task to draw a picture(attached in the post) using ObjectARX but the picture is complicated(too many things to take into considerations) and how to accomplish the task. What is the best option. I have to use ObjectARX SDK and C# to do it.
View 5 RepliesI am trying to draw lines(orange colored) on this 3d object(crimson colored). Every time I go to select the lines to alter them I end up only being able to select the 3d object they are on. How do I turn off the selection of the 3d objects or anything on that layer?
View 9 Replies View RelatedI'm trying to draw a solid object. I have the top and bottom base, and all I want is to loft that thing, but when I do, it only lofts the limits - it results in a hollow object.
View 7 Replies View Relatedhow to draw 3d box in Dragging Using object arx.
View 2 Replies View RelatedIs it easier to draw out all faces of the 3d object and then merge them together later on or is there a method that allows me to be able to dimension and extrude my object as I work from the 3d space?
Say, I created a square and extruded it into a block. Then I want to look at one of the sides and poke 3 holes in it. My problem is I cannot use annotate to change the geometrical constraints on them, like if my circle is out of place or if it is too large or small.( or at least they don't show up for me.)
I'm learning about the UCS system but I thought if I moved the UCS system to the face I want to draw on and change from 3d modeling back to 2d annotation I can go ahead and annotate from that face of interest.
I just stated using AutoCAD 2006 this summer as an intern for an engineering department. The program has become pretty easy to use and I thought i was getting the hang of it.
All of a sudden, when i draw a line, circle, or another shape, i can't see the input bar that floats at the end of the line.
What im talking about is the small display that always sticks to the end of the object your drawing. It displays the angle the line is drawn at, you can see what measurement you're typing in.
I cant get rounded shape in the irregular form attached. When I have one straight line edge its ok, but when have many edges in an irregular 3d shape it gives me an error message.
Wanted to do the same thing in the yellow pointers that I did in the black one.
Whenever i draw a new line, hatch etc - Autocad draws the object with a certain lineype. Then after i draw the line i have to manually click the line and set it's linetype to "By layer". It doesn't matter which layer i set as current, it never draws by layer, allways by this other linetype.
Using Cad 10 Architecture - But tried opening the file on other versions aswell, with the same result.
I made a 3D box shape in AutoCAD. I would like to draw a line on one of the surfaces of the box. Also I know you can use the the linear tool under Annotations to display dimensions of 2D lines. But I don't know how to do it so that it that shows the dimension on a vertical axis as shown in the picture below.
View 9 Replies View RelatedHow do I draw perpendicular from a line or object at a specific point? I know by holding shift and osnap perpendicular I can draw the line but I can not osnap to the exact point!
View 9 Replies View RelatedHow to draw this object?
I want to draw an object similar to the dimension that contains two arrowheads with TWO “text dimension” to indicate the range each “steel bar” covers. This is important to indicate the range the two bars cover with the same dimension object.
Have a look on the screenshot below . The file is attached.
I want extract a (x,y,z) point from a text file and want to put marker to that point in a dwg file. how can I accomplish that?
View 2 Replies View RelatedIs there a lisp routine to draw 3D object by the LOFT way ? .
View 4 Replies View RelatedI'm doing a line drawn that is selected breakpoints..Such as the Software Corel Draw Software .I'm doing move draw line With Move Object.
View 3 Replies View RelatedI've found this tutorial on adding multiple gradients to form a glassy text [URL]....and I never knew you could create multiple gradients on one object.
I can only manage to apply one gradient. On the tutorial it sounds easy to just draw a gradient, then draw another. However it is not that simple; I draw a gradient, then I attempt to draw the second, and it just moves the first gradient.
How does one draw multiple gradients on the same object?
we have a problem with Illustrator.Illustrator pulls behind selection. You can't select an object with the Selection tool, without afterwards draw the object by moving the mouse. A new installation and resetting Illustrator was unsuccessful.
View 16 Replies View RelatedWhen in Orthographic view and in back, left, right, top, bottom, front view, I cannot draw an object as Cube by example. To be able to make the object I have to move a little bit my view .
Example. If I was in Ortho - Back view, I move the view a bit so it is not perfectly on the back view than it allowed me to draw object. Another way is to change to Perspective view.
why I cannot make object on straight orthographic view?
How do I draw a circular ring around an object in PSE 11 ?
View 3 Replies View RelatedI have an object that I need to print . It is a cartoon man and a cartoon flag with text next to it . I have printed the whole thing without a cut and it worked fine .
But now I need to print it with the images cut out. I believe I will be able to put a contour around the font easily however the problem is putting it around the flag with man in front of it . right now it makes contours on the inside of the image. Its hard to explain ..... the flag is supposed to be white with blue and red in it . and when I printed it on a big sheet with no contour it was fine .. but now that I need to do it on its own the contour goes inside the flag because there is no rectangle shape around the flag .(no outline around flag) How do I put the rectangle around the flag as well as put a smooth contour around handyman?
Let say I have a pot of flower I drew in Illustrator and I want to place it on a Perspective grid so that I will have half of the drawing snap on Left Grid in the perspective and another half snap to Right Grid?
Is there any easy way to do this without first slicing the artwork in half and place them individually?
I have a problem with my brush and pencil tool. Whenever I want to draw an object without a stroke and just a fill, it immediately assigns me a stroke in either the colour my fill is, or, if I'm using a gradient, in black. It doesn't have that problem with the pen tool though. I also checked in my presettings and my Transform plaette that the "Align to Pixel Grid" option is unchecked. Also, the "New Art has basic appearance" is unchecked.
View 2 Replies View Related1. original
2. doubled horizontal size of the line
I'm using scatter brush to draw multiple lines with random size and angle(image 1.), and trying to increase only the horizontal size(image 2.), keeping the interval the same. But when I do, the interval is also increased since 'Spacing' option follows the size of the base object. I could adjust and decrease the spacing value, but the problem is, spacing option cannot go below 1%. So if want to increase the line size and maintain the interval, there's no way to do it. expending then scaling could work, but that's not what I want.
I have a rather simple 3rd party custom object... I tried to get its bounding box but the coordinates that come back don't seem to relate at all to the object.
What I'd like are the coordinates of two nodes the object contains...
Is it possible to apply the autocad cursor in some why with the node object snap to get their coordinates?
I've already started using the AutoCad 3D.
how to put a 3D object on top of the another 3D object in autocad"! E.g.,I want to put a 3d object of one leaf (raised 1") on top of the vase, so that the edges of the leaf are placed completely on the surface of the vase.
I extruded the leaf 1" first, then tried to copy it on a solid cylinder of a vase, but it didn't work!!! It seems to be simple, maybe not!
Is it possible to select an object for reading in an XRef?
PS I think it has something to do with Editor.SelectNestedEntity() but it is the end of a long day and I can't fathom it out
When I select an object and pan to make another selection the first object "deselects". The object(s) will stay selected until I pan and as soon as I start to pan the grips go away and the object(s) is deselected.
View 9 Replies View RelatedHow do I keep the fill ON the object that gets selected so I know not to pick it again as move through the drawing?
How /or/ where can I get a listing of my SetVars.
Running the Setvar (?) command doesnt offer a description for each?
We upgraded to AutoCAD Mechanical 2012 (from AutoCAD Mechanical 2009).
I used to go: TOOLS > DRAWING ORDER, in order to bring an object to the back or the front of another object.
Now that we are using AM 2012, I can't find where this command is located.
I get the following exception message while debugging, after pasting VBA code into my vb.net project:
"Object reference not set to an instance of an object"
Without going to specifics yet, I commented-out ObjectCollections and the error happened further down in the class.
Is there a different way ObjectCollections are handled in a vb.net class, versus a VBA module?
I want to Make Polyline object instead of Line object. How to change the object?
View 1 Replies View RelatedI'm making a surface out of contours. The problem is the contours have the elevation listed under object information, not geometry (the contours were brought in from a GIS file, which I do not have access to, or I would bring them in again with the elevations properly assigned, this is not an option). How can I quickly change the geometry elevation property to match the miscellaneous property?
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3