I try to use the ACA .Net c# API to add a new construct to my project. Currently in 2013.
In the samples I've found one for basic Projetnavigator things, but adding a new construct isn't covered.
This may sound like a simple question for heavy users, but I just got started. I have all my edits completed, splices with transitions, etc. and decided to attach a photo from the available stock to the front of the timeline. I was successful at this, but when I try to expand the timeframe of that photo - pull it to the right to make it longer, it won't budge and is stuck at the given length when I dropped it in. Even at the control panel, I can't lengthen the time. The same happens at the end. I drag in a photo with the idea of adding titles to the end but I can't drag the photo to the right to lengthen the time. Is there something I'm missing?
View 1 Replies View RelatedWhen creating custom materials and utilizing them within your Revit project, are the image files embedded within the RVT file and thereby increasing file size? I was needing to know before we load down the project file (.rvt) with many custom materials. Hopefully it is just a pointer to a separate material file.
View 1 Replies View RelatedI´m currently working on a book project in Lightroom 4. I´m trying to add pictures (new pictures), but that does not seem to work on an ongoing book project.
View 4 Replies View RelatedI am using Elements 10 and do a lot of editing in slide show projects. I want to add video clips that are iin my catalog to my slide project. Every time I click on video clips it tells me I have to go to Premiere to activate. Is there a simpler way? I usually don't go to Premiere until I want to burn a disc..I don't need to edit the video clips.
View 5 Replies View RelatedI have a paper blueprint of a floor plan, where all units are expressed in mm. I need to transfer this to autocad, so I am wondering how to construct the plan in mm? (changing units, etc.)
The scale is in 1:100. Does that matter?
I need a Manikin in Inventor. The export from Catia V5 is failed. When I open it in Inventor i cant see anything, only 3 flats. The problem is that i dont find the command to do a Manikin in Inventor.
View 4 Replies View RelatedI am having trouble constructing the roof for a 3d model. I have attached drawings which should allow you to visualise the type of roof I am aiming to construct.
I have had a go at using the box function then using slice to get the solid into the right shape but then I am unable to slice it at an angle as shown by the red dotted line on my attachment.
roof.docx
I'm starting to set up Sheets from our template but none of the construct is transfering except for dimension lines. The views are drug in from Project Navigator. Elevations are fine, but when the viewport window is made larger the construct isn't there. I've attached an example of what is supposed to be the floor plan.
I've edited the walls but that made no difference. They are set to start at 0". Is there anything I haven't checked? I'm supposed to go to contract with these drawings next week.
How do I construct a sort of compound curve using Autocad?
What I got is a circle or arc of about R=6. A node or endpoint about 5-6 units away from the center. I want a curve of R=10 to create an arc to go through the endpoint, and be tangent to the arc too. I can visualize it, but cannot draft it.
Now, I realize that there are a few possible solutions, but only one applies. I tried using the 2P function on curves, but instead of being tangent to the curve it comes up at a right angle to it. I can draw a tangent solution within a couple of seconds, but a curve?
How do you construct the actual involute curve in AutoCAD?
View 1 Replies View RelatedI need to drawing something similar to the attached image on either side of a "U" shaped rod.
The "U" shape is drawn using a sweep of a circle (the hatched section on the atatched image illustrates).
I just can't fathom how to draw the solid at the top oneiter side.
I've been trying to add a plane at an angle, then draw a circle & try to sweep that for each half of the "u", but after a few hours, total fail
I have tried in vain to construct a planetary gear train in Inventor 2011 & the spur gear generator hasn't work much since the results are far from good, I have problems getting all the gears to fit together. The Internal gear has a diametrical pitch of d=120mm & the smallest gear a diametrical pitch of d=20mm, the outcome should produce a 6:1 gear ratio. The 3 other gears only offer stabillity, but I still need to know how I get it all to fit together with my measurements?
View 9 Replies View Relatedhow to construct a curved tube/pipe run?
I've created a 3d sketch with the run of the tube on it but when I click "Derived Route" although the full 3d sketch is highlighted bugger all happens. There's nothing in the "Included Geometry" folder.
Is it because of the material? I've set it to a "Tube With Bends" and set my default radius.
Inventor 2013
How to construct Type U Threads in rectangular view.
View 1 Replies View RelatedI cannot xref a construct into a view dwg using PN. I get error "Could not reference file <construct> in <view>. Same problem whether I use relative or full pathing. But I can manually attach the construct using the XREF command. So I know it is not a file/folder permissions problem. What's annoying is that I did get it to work with one construct but not another.
I am using ACA 2013 and I see that there is a service pack 2 update.
I am drawing a house with a hip roof. The roof has a overhang with fascia and soffit. What is the best way to construct the components of the roof system. Should the hip roof and the soffit with fascia to be one system or two separate systems?
View 3 Replies View RelatedHow to construct a table to lay out the "horizontal curve" on the ground?
The steps that follow the design of the horizontal alignment is to set up it on the ground. For this purpose a table that contains angles and distances is established to set up the curve on the ground. How this process is performed on the C3D.
I have several different views xreffed into a single view, should'nt they all share the base construct? i.e. If I want to overlay the lighting plan, HVAC plan and my reflected ceiling plan- they should share the first floor construct. Instead each one brings in the same base construct and then when you overlay them, the walls interfere and you get wall errors.
View 9 Replies View RelatedI'm trying to replicate the way these circles are connected for use in a new design. At first I tried constructing this with the use of a white outline around the circles. But this isn't a solution, as the white pace around each linked circle obviously isn't a perfect circle itself.
The problem is achieving a perfectly aligned, flowing "s" curve. The connecting points that are giving me trouble are in the red circles.I can approximate the connection points, but this leaves a "kink" in what should be a perfectly flowing "s" curve. I thought smart guides/snap to point would br useful here, but to no avail.
I have a Project Template that is used when creating a new project. I noticed that the Tool Palette in the Project Template and the Tool Palette in the new Project are not the same. How do I get the new Projects to pull the same Tool Palettes from the Project Template?
View 2 Replies View RelatedHow can I change the way the Project Browser maps the creation of new projects?
Currently, the new project folder is created and named according to the Project Name prompt. We want the folder to be named according to the Project Number prompt...
Is it possible to assign a project number to a project file and have it fill in the project Iproerties field?
View 2 Replies View RelatedI have to set up a project in Navigator so we can get started on it but I will have to go back and change the project number when we get it.
My question is how do I change the project no so that it re paths everything and reorganizes itself numerically in Windows Explorer...or should I just create a new project in Navigator and copy the files I need into the new project?
i need a lisp that construct line between two lines of wall by selection called (Wall Centerline)
i attach example of what i want assuming that i will often isolate wall layer in the project to facilitate the task.
I want to construct lines between every two line ending point by multi selectio window instead of drawing it manually between lines ending point ?
View 3 Replies View Relatedwhen trying to create a panorama on Element 11 I get error message: window does not have a construct
View 1 Replies View RelatedI do not have vault installed and I am trying to add sub files to my project. As of now my project has to find many of my files and I do not want to copy and past them into my project folder as this will mess with my parts numbering system. I want only one part / assembly file per part. I assume that you can do this with the project dialog box or some other system tool I just can not seem to figure it out.
View 1 Replies View RelatedI've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
I'm having issues with importing an image I created in photoshop that has a background transparency into another photoshop project. The part of the image that should be invisible, is not.
View 5 Replies View RelatedI used railing tools and created railing in the project files. i want to change rail and Baluster.i created metric baluster and rail from family and saved in the local drive. i used in to my project also it is working fine.
i want to use this railing to some other project. how to get it either copy past or revit link or any other way because the railing created in project file.