I am using Elements 10 and do a lot of editing in slide show projects. I want to add video clips that are iin my catalog to my slide project. Every time I click on video clips it tells me I have to go to Premiere to activate. Is there a simpler way? I usually don't go to Premiere until I want to burn a disc..I don't need to edit the video clips.
View 5 RepliesI'm trying to integrate 16:9 HD video clips into a 4:3 project (or vica versa). Obviously it will take cropping the edges but how? VS does not appear to be up to the task that I can figure. Maybe a third party utility?
View 1 Replies View RelatedI am using VS X3 and recently have a problem with it. At the time moive created there are couple clips in dark but they were ok when I edited them in the project status.
View 6 Replies View RelatedI'm working on a project that pulls together many short clips from many much longer video files e.g. there might be less than a minute pulled from a 60 minute file then another then another etc. I found that my computer (which is reasonably beefy) was struggling to cope with the workload so I split the project into separate project files i.e. Part 1, Part 2 and Part 3. My thinking was that once I had done all the editing I could cut and paste all the clips into a single new project file before rendering the entire thing. But I can't work out how to do it! Sure, I can copy and past individual clips or even a sequence of clips but on pasting they lose all the editing I've done! I just end up with a uniform bunch of unedited clips!
I guess the alternative is to render each project file (1, 2 and 3) separately then pull the rendered videos together into Project 4. I can then render Project 4 to give me my final 'movie'. But surely that means as I've rendered everything twice I'm suffering a quality loss?
So the question is: is there any way of copying edited video clips from one project file into another project file AND retaining all the edits?
In order to add mpeg video files to the library, I create in the library a new video folder for the current project.During adding the files I get sometimes the message: "No storage to load BB!!"
View 14 Replies View RelatedI'm having some troubles viewing all my video thumbnails.
I have different kinds of video clips in my organizer, but it's only the MOV-files that won’t show. The funny thing is, that it’s only some of the MOV-files that doesn’t show up others do!
All the video clips are recorded with an iPhone, and imported to the catalog at the same time.Even though I can’t see the thumbnail, I can still playback the video clip.
I've already tried the following:
- Repairing the catalog
- Optimizing the catalog
- Restoring the preferences to default settings
- Renaming the "status.dat" and "psa.prf" files
My specifications:
- Installed Adobe software - Photoshop Elements 12 + Premiere Elements 12
- Catalog containing appx. 17.000 photos and 400 video clips
- Windows 7 64 bit
The clips are playable with Quicktime or Windows Media Player.
View 4 Replies View RelatedNew to Premier Elements 10. Is there a way to save individual video clips after chopping up my raw video. Or should I be using another program? I simply want to convert a long video into shorter segments for my files and ease of future use.
View 2 Replies View RelatedI have a Canon SX30IS. When I use PSE9 to download from memory card, if there are any videos present on the card, the Photo Downloader crashes.
I believe that it is something to do with Apple Quicktime. When I uninstall Quicktime , PSE downloader does not crash while importing media form this camera, but cannot play video clips. On reinstalling Quicktime , the PSE downloader crashes while searching the memory card for media.
I have not upgraded PSE twice now because of this crash. What makes it worse is that Apple Quicktime is a very poor media player, managing about 2FPS on the video clips from this camera when both the Canon and the VLC video codecs can manage 30FPS.
I would much prefer if I could choose to use a video renderer, like using any available Windows codecs rather than insisting on using annoying Apple software.
I've been working the last 6 months with 4 GH2s and ran into some strange troubles when initially importing them to the timeline. 2 hour shots are divided into 6 or 7 different files, and when brought into PP the first clips audio was assigned to all the other remaining clips. This was pretty strange, but I fixed it by using TSmuxer. It was added time in the workflow/set up, but in the end I could produce;
The latest update of PPCC now combines the entire 2 hours of footage into each of the 7 files being imported. So it is importing 2 hours of footage 7 times for each camera. The conforming is taking forever! For 4 cameras it's conforming 14 hours of footage each, when it should literally be a 7th of that.
It is taking up large amounts of time and disk space.
I'm trying to save a file as a back-up so I need to save it to my PC in a file format that is editable in elements 8
View 1 Replies View RelatedI am using a Flip Slide HD video camera. After importing the videos into Corel VideoStudio, a video that should be 25 seconds long only plays 12 seconds of the video. The big issue is that the rest of the video is not there. It's almost like someone cut part of the video off. When I play the video on the camera and on my desktop with Quicktime, it plays the entire video. After I import the video, it is cut in half again.
View 4 Replies View RelatedI have a problem with LR3. After completing a video I go to Export Slide Show to Video. After rendering and encoding, the program stops at the last slide and does nothing. It means that I cannot use LR for videos or time lapse.
View 4 Replies View RelatedI have not renamed or moved original elements, yet when I recently opened an on-going project in Photoshop Elements 4.0, about 1/4 of the media elements were gone. Why? Is there a way to troubleshoot this? Anyway to recover these slides? Can't see that any photos, etc in the Organizer have broken links.
View 1 Replies View RelatedHave just started working on VS and discovered a strange issue. I can put a piece of video in the clip window to mark in/out points and it plays fine. When I drag it to the timeline and play as a clip, there is no audio!
View 1 Replies View RelatedI just created a project with many different clips. Some of them play perfectly while others are jerky in playback. The original videos were imported to Correl from video files downloaded from the internet. Some of them are MPEG and others are AVI. It seems that the MPEG files play fine while the AVI files are slow. Not sure why this is since I created another very similar project and the AVI files in that project played back fine.
View 2 Replies View RelatedProblem I was having was using clips of various sizes and properties in the same project. Original entry follows below.
I have a new system (see my profile) that I think should work with Pro X4 just great.
However, I had some AVI videos I tried to edit. I could not get frame resolution in the time line, as I remembered getting with older Corel products editing MPEG files.
Nevertheless, I was able to edit AVI and get good results as long as the AVI files did not have sound. When I tried to edit AVI with sound, preview was unusable. The transitions got lost during the preview, and the sound dropped out around cuts and splices and transitions.
Needless to say, editing did not go well without a decent preview. Are these artifacts of trying to edit AVI files, or is there something else amiss? Should I be capturing in MPEG or some format other than AVI?
The following settings seemed to get the best preview results, but I still had sound drop outs around cuts, splices, and transitions (which are splices). I expected the sound to x-fade around transitions.
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 6000 kbps)
Audio data rate: 384 kbps
Dolby Digital Audio, 48 KHz, 3/2(L,C,R,SL,SR)
I set the project to MPEG, even though the source was AVI, because it seemed to improve the preview response time a bit, but not enough to make a real difference.
By the way, i use it for a whole week, and it worked just fine, until today i have this problem.
View 1 Replies View RelatedWhilst after a discussion yesterday Adobe know of and are dealing with an error when splitting video clips in PS CC ( I have a temporary fix). I have also come across another potential issue in splitting video clips - it appears that an individual clip can only be split twice. What is the theoretical number of times PS CC will allow a clip to be split?
View 1 Replies View RelatedIs there anyway to put a small video clip into a photoshop?
View 7 Replies View RelatedBasically, I want to use part/pieces of several project files already created, i.e. to combine the chosen sections into one new project file. Have looked in the Manual and cannot locate the answer! I am now using Prox5.
View 4 Replies View RelatedI have previously created a project using avi files and successfully burnt a dvd. Now when I reload the project all the AVI clips on the timeline are "unreadable" (black and white horizontal bands) yet they have not been moved from their original folder and all clips are visible on under "video" on the "edit" page. I have even tried relinking but to no avail. All the clips still play perfectly on Media player.
View 14 Replies View Relatedwhy do some of the slide come out sideways when i try to make a dvd?
View 3 Replies View RelatedAfter realizing the Mercalli runs better on single clips, is there a way of editing a clip within a project and saving (after "creating" this clip only) and then reinserting into the project?
View 4 Replies View RelatedHow do I convert a slide to a picture?
View 1 Replies View RelatedHow do I get the letters to fly onto a blank slide to spell words?
View 4 Replies View RelatedIn Photoshop Elements Organizer, how do you change the slide order in a slide show?
View 3 Replies View Relatedeach time I force quit Smoke with the service monitor in a project when I open the same project after it takes several time to load the clips (EDITDESK: LOADING CLIPS). Sometimes the project just didn't open and stay on the EDITDESK: LOADING CLIPS screen.
There's something I'm doing wrong or my project is totally corrupt ?
smoke201321_smack02_app.txt smoke201321_smack02_shell.txt
I'm using CS6 13.0.4 x64. I want to create a very basic slideshow that includes both still images and video clips. I have read this is possible but can find no specifics.
View 3 Replies View Relatedi an having trouble accessing this function. I have CS6 (windows) and i can't access the 'speed/duration sliders' to slow down my clip to look like its in slow motion. I know this can be done
View 3 Replies View RelatedIs it possible to correct a digital image from an old scanned slide, which has been scanned back to front, using Photoshop Elements 10?
View 3 Replies View Related