VideoStudio :: Can't Reload VSP Project - All AVI Clips Unreadable
Nov 5, 2010
I have previously created a project using avi files and successfully burnt a dvd. Now when I reload the project all the AVI clips on the timeline are "unreadable" (black and white horizontal bands) yet they have not been moved from their original folder and all clips are visible on under "video" on the "edit" page. I have even tried relinking but to no avail. All the clips still play perfectly on Media player.
View 14 Replies
ADVERTISEMENT
Oct 5, 2011
Have just started working on VS and discovered a strange issue. I can put a piece of video in the clip window to mark in/out points and it plays fine. When I drag it to the timeline and play as a clip, there is no audio!
View 1 Replies
View Related
Jun 4, 2012
I just created a project with many different clips. Some of them play perfectly while others are jerky in playback. The original videos were imported to Correl from video files downloaded from the internet. Some of them are MPEG and others are AVI. It seems that the MPEG files play fine while the AVI files are slow. Not sure why this is since I created another very similar project and the AVI files in that project played back fine.
View 2 Replies
View Related
Jan 20, 2012
Problem I was having was using clips of various sizes and properties in the same project. Original entry follows below.
I have a new system (see my profile) that I think should work with Pro X4 just great.
However, I had some AVI videos I tried to edit. I could not get frame resolution in the time line, as I remembered getting with older Corel products editing MPEG files.
Nevertheless, I was able to edit AVI and get good results as long as the AVI files did not have sound. When I tried to edit AVI with sound, preview was unusable. The transitions got lost during the preview, and the sound dropped out around cuts and splices and transitions.
Needless to say, editing did not go well without a decent preview. Are these artifacts of trying to edit AVI files, or is there something else amiss? Should I be capturing in MPEG or some format other than AVI?
The following settings seemed to get the best preview results, but I still had sound drop outs around cuts, splices, and transitions (which are splices). I expected the sound to x-fade around transitions.
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 6000 kbps)
Audio data rate: 384 kbps
Dolby Digital Audio, 48 KHz, 3/2(L,C,R,SL,SR)
I set the project to MPEG, even though the source was AVI, because it seemed to improve the preview response time a bit, but not enough to make a real difference.
View 14 Replies
View Related
Jan 14, 2013
By the way, i use it for a whole week, and it worked just fine, until today i have this problem.
View 1 Replies
View Related
Jul 24, 2011
I'm trying to integrate 16:9 HD video clips into a 4:3 project (or vica versa). Obviously it will take cropping the edges but how? VS does not appear to be up to the task that I can figure. Maybe a third party utility?
View 1 Replies
View Related
Aug 12, 2012
Basically, I want to use part/pieces of several project files already created, i.e. to combine the chosen sections into one new project file. Have looked in the Manual and cannot locate the answer! I am now using Prox5.
View 4 Replies
View Related
Oct 15, 2010
I am using VS X3 and recently have a problem with it. At the time moive created there are couple clips in dark but they were ok when I edited them in the project status.
View 6 Replies
View Related
Nov 20, 2012
I'm working on a project that pulls together many short clips from many much longer video files e.g. there might be less than a minute pulled from a 60 minute file then another then another etc. I found that my computer (which is reasonably beefy) was struggling to cope with the workload so I split the project into separate project files i.e. Part 1, Part 2 and Part 3. My thinking was that once I had done all the editing I could cut and paste all the clips into a single new project file before rendering the entire thing. But I can't work out how to do it! Sure, I can copy and past individual clips or even a sequence of clips but on pasting they lose all the editing I've done! I just end up with a uniform bunch of unedited clips!
I guess the alternative is to render each project file (1, 2 and 3) separately then pull the rendered videos together into Project 4. I can then render Project 4 to give me my final 'movie'. But surely that means as I've rendered everything twice I'm suffering a quality loss?
So the question is: is there any way of copying edited video clips from one project file into another project file AND retaining all the edits?
View 2 Replies
View Related
May 21, 2012
After realizing the Mercalli runs better on single clips, is there a way of editing a clip within a project and saving (after "creating" this clip only) and then reinserting into the project?
View 4 Replies
View Related
Jul 25, 2012
I am trying to create a video file for the 1st time with VS X5.The project is 27 mins long and includes jpeg images and avi
clips that I have used successfully with VS11+, and film that I have taken with my camera which I have been using for years.It is not HD and I intended to burn a standard DVD.However, at 99% of rendering a message showed saying "Frame 329 is unreadable".I pressed ok.Nothing is showing in the folder that it was hopefully being saved to .Lwr field 1st-DVD PAL-7000 video data rate-384 audio data rate-save as mpeg files -----all properties I have used before with no problem.My only change is now to use 16.9 aspect ratio.
View 14 Replies
View Related
Feb 1, 2012
I'm editing MTS files and its H264 video type with a frame rate of 29.970/sec, I'm getting a error that I'm sure you have heard about before, but I can't seem to find the solution. I receive an error stating,'' 914 frame is unreadable'', so if I divided 914 by 29.970 ,shouldn't that give me the second that I have to check for a frame error?
View 1 Replies
View Related
Jul 29, 2012
Had to reinstall VS 4 on new laptop...getting "content unreadable" for .MOV files.
View 4 Replies
View Related
Oct 6, 2013
I need to do some editing on captures made using Bandicam before uploading to YouTube, but Corel VideoStudio just refuses to open the video files, telling the format is not recognized. Only Windows Media Player can play them. Since I purchased this computer. With my Pentium D computer running Windows 7, I was able to capture videos with FRAPS and edit them with Corel VideoStudio. Now with that Core i7, even with a NVIDIA graphic card, FRAPS crashes all the times and BandiCam, which I tried as a replacement after the failure of many others (EzVid, Total Screen Recorder, Dxtory), produces unusable video files.
There is absolutely no good way to convert these videos. All Windows applications for this are just pain, offering a multitude of useless and nonsense options and just taking years to process a single video. There are some Linux conversion tools I had success with in the past, but the command line is so complex that it takes hours to figure out. It is easy to blame BandiCam and stop there. I did this error myself before thinking that VideoStudio should be able to open videos in MPEG format. VideoStudio was my only choice, because the other candidate, Premiere Elements, is unusable, with too small fonts impossible to enlarge.
BandiCam is the only way I found to record videos with audio. Other tools are just unusable (Total Screen Recorder even impossible to start), impose music I don't want (EzVid) or make the game freeze temporarily and audio stuter (Dxtory). FRAPS, which was working great under Windows 7, is unstable with Windows 8, making the screen flicker and finally freezing the game all the times. I am to the point of considering the purchase of HDMI input card and recording the screen output with another computer!
Any success with editing Bandicam videos using VideoStudio? Maybe this is yet another Windows 8 issue so I now need a second computer running Windows 7, or REINSTALL everyting again with Windows 7.
[URL]
View 2 Replies
View Related
May 25, 2012
After Effects CS6: Cache and Reload Footage Problem
I am having trouble getting my footage to update in an AE project.
In an existing project, there is an image sequence in a composition. I have saved and closed AE, modified the footage (same dimensions and qty. of frames, only the pixel data changes), and then re-launched AE and opened the project. Though I have changed the footage, the old content still appears. I have done the following:
Edit>Purge>All Memory
Edit>Purge>Image Cache Memory
Edit>Preferences>Media & Disk Cache>Empty Disk Cache[code].....
None of these got the footage to update. I could double-click on the footage in the project bin and scrub the play head and the old footage was still displayed.Finally I had to replace the footage with itself and that resolved the issue.
If this is operator error, lack of understanding the cache functions, or something else. I don't recall this behavior in CS 5.5, so I am guessing this is a change in CS 6.
Win 7 Pro 64bit Service Pack 1
Intel Xeon CPU X5450 @ 3.00 GHz 2.99 GHz
RAM 20 GB
View 10 Replies
View Related
Apr 24, 2013
I am using Elements 10 and do a lot of editing in slide show projects. I want to add video clips that are iin my catalog to my slide project. Every time I click on video clips it tells me I have to go to Premiere to activate. Is there a simpler way? I usually don't go to Premiere until I want to burn a disc..I don't need to edit the video clips.
View 5 Replies
View Related
Aug 22, 2011
I've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
View 7 Replies
View Related
Mar 13, 2013
each time I force quit Smoke with the service monitor in a project when I open the same project after it takes several time to load the clips (EDITDESK: LOADING CLIPS). Sometimes the project just didn't open and stay on the EDITDESK: LOADING CLIPS screen.
There's something I'm doing wrong or my project is totally corrupt ?
smoke201321_smack02_app.txt smoke201321_smack02_shell.txt
View 5 Replies
View Related
Jul 7, 2012
When I try to import clips into Smac 2013 using the 'Create Project Media' option, I get the following error:
Cannot Connect to Back Burner Manager
View 2 Replies
View Related
Apr 3, 2012
All of a sudden my Videostudio X4 will not play any clip for longer then a second or two. When you play a clip or the project it plays for 1 or 2 seconds and stops just like you hit the stop or pause button. Click play again and it does the same thing. Makes it really impossible to edit. It had been working great up until last week. I tried uninstalling and reinstalling but still have the same problem. I have excluded my anti virus from scanning the Corel folder.
View 1 Replies
View Related
Sep 13, 2012
So I drag and drop a bunch of video files into the timeline and want to mute them all in one easy step. It would seem that all you would need to do it right click and mute while they are still all selected from the import but the mute setting isn't active. meaning I have to mute each clip separately. That takes a LONG time.
View 3 Replies
View Related
Apr 6, 2013
Can I rename the sound clips to something more sensible and explanatory without causing any problems?
View 2 Replies
View Related
Dec 3, 2011
I have ONE large 1hr AVI file captured from a DV camcorder. I have used Corel Videostudio to "split by scene", and that works fine, all clips are cpatured. BUT the shooting date for the clips are shown as the same date and time for all clips.
Where can I see the actual shooting date for each clip? I tried to use the old Win Movice maker on a WinXP machine, and here it works fine.
In corel VS I also tried to take one clip in the middle of the file and used the shared function to create an DV AVI file. This file I imported to VideoStudio - and now the date and time for this single clip is right. Unfortunately if I a convert all clips into one single file again I still have the problem.
View 2 Replies
View Related
Oct 5, 2012
In the past using VS10+ I noticed an issue importing sound and music clips. I did import them into my project from my music folder without any problems. The issue is when I deleted the sound and music clip from my folder it disappeared from my video project and I would have to get the clip back into my music folder and keep it in there until I burned a DVD. Is this routine for VS?
View 2 Replies
View Related
Apr 11, 2011
I am importing some .avi files and burning to a disc. Most of the .avi clips are fine on the DVD, but two that have panning sequences are very jerky. I checked the source .avi files and they pan smoothly.
I've explored changing the Speed to Quality slider and also the Frame Type (Upper/Lower field first) setting to no avail.
AVI Clip Properties:
File Format: Microsoft AVI files
File Size: 13,513 KB
Frame rate: 23.976 frames/sec
Duration: 62.479 seconds
Data rate: 215.01 kbps
Video
Compression: ffdshow Video Decoder
Attributes: 24 bits, 720x404
Total Frames: 1,498 frame(s)
[code].....
View 9 Replies
View Related
Sep 8, 2012
Cannot preview .MPG files.VSPro5 won’t play MPG clips.
I have only ever worked with AVI files, MOV files OR Video_TS files with few problems and have recently upgraded from CVSProX4 to X5. A family member has asked me to put all his home movies onto DVD. These are in MPG format.
I can import all the individual clips into CVSProX5 – however, the clips will only play when they are selected as the whole project. Selecting an individual clip for editing purposes results in a green screen. However I can manually move the scrubber through every frame within that clip (with an absence of sound) – but will not play that clip. I have converted some clips to .MOV format and can then play (and edit) and listen to individual clips.
I don’t particulary want to convert many hundreds of individual .MPG clips.
View 3 Replies
View Related
Jun 13, 2012
How can I rename clips in the library. For example, after I split or multi split a clip, I have multiple files with the same name? I cannot click or rightclick, and then rename the files to keep them separate.
View 5 Replies
View Related
Aug 30, 2013
I am running the 30 days trial version of the VS pro X6, but the added clips are muted. important before buying).
When I add a clip the sound is ONLY played when volume for the clip is 100% (other value makes the clip mute) and is the clip preview, not the project preview. (project preview plays only the added soundtrack- if there is any).
Even if volume is 100%, when exporting the project, clip sound is muted (only the added soundtrack will sound).
- Of course I have tested several clips, and with or without an additional mp3 soundtrack.
- I also installed the just released VS SP 1, but no changes.
- I export (Share) using Vimeo HD template.
- Problem is not shown if I use VS 11 (which I also has installed).
My system characteristics are in my profile and also here:
- Win 8 pro 64 bits
- Dell Inc. Vostro 3360
- 1.70 gigahertz Intel Core i5-3317U
The clip's properties are:
Type: .MOV
-640x480
-dr 11347kbps
-total br: 11619 kbps
-fr: 30
-Audio br: 272kbps
-channels: 1 mono
-Audio sample rate: 16khz
View 4 Replies
View Related
Aug 28, 2011
I want to edit a clip by cutting out the lips from one clip and overlaying them onto another still clip . i am using vs pro 4
View 2 Replies
View Related
Apr 27, 2011
My question: I prefer to shoot my videos in 720p, to optimally match my TV. I see that in VideoStudio, the only 720p option is by using HDV. Is there any other way to get 1280x720 output? I see that AVCHD and Blu-Ray only offers 1980 and 1440 options, both which resize my videos (which I do not want). I'd like to save back as 1280x720 MP4, but VS's MP4 option doesn't provide this.
(Now that I think about it, why does VideoStudio offer 1440 rather than 1280? I thought 1920x1080 and 1280x720 were the common HD formats.)
View 2 Replies
View Related
Aug 26, 2012
Taken video clips with that camera? It uses mpg4 ACE (which is not a codec known to VideoStudio) and my PC tells me that the clips come at 30.05 fps. What can I do now? Why the clips aren't 29.97 fps?
View 2 Replies
View Related
