AutoCAD Map 3D :: How Many Data Links Can A Drawing Handle
Mar 5, 2012
How does the datalinks handle the links to the excel spreadsheet. I am drawing parcels from legal descriptions and would like to link each parcel to a spreadsheet with all the parcels data via a ID number. Then be able to click on that parcel and see the owner (the link). But my question is: do I have to give each link a new name to correspond with the parcel in order to see each parcel ownership?
My company produces drawing sets that show the same information in multiple places. I.e. an attribute in drawing A is also shown in a different block in drawing B and a different block in drawing C and in a table. This creates problems in that as soon as one piece of information changes, you have to change it in 14 places... and it creates typos. A LOT of typos. So I'm trying to come up with a good solution as to how to link these pieces of information.
I know how to use data links in a table... but is there a way to link block attributes? Also, am I just barking up the wrong tree? Because in my head, you'd have to manually link all of these things for every new drawing, and they can be easily broken.
How to manipulate data links? I want excel tables to come over and use their native excel formatting. I have a heck of a time getting them to look right (text size, font, justification, cell size, etc) and then when I update the link after making changes to the XLS, they get all cattywompus again.
I've never been real strong on text management in CAD; I'm always scaling text and doing poor drafting things like that. So I looked into Tablestyles and things a bit and thought I had it, but not so much.
Messing around with MAP in Civil3d 2011, creating object data for sanitary sewer manholes, how do you handle object data for inverts since there could be multiple depths and directions. Whats the best way to set it up? And what kind of addtional info should there be. And when I connect to a shp file, how do you label with multiple lines, I seem to only be able to select 1 feature to label. When zoomed out would like to view structure name and when zoomed in view name, rim elevation, invert elevations.
Civil3D 2013 Windows 7, 64 bit Intel i7 2600 @ 3.40Ghz 16 GB RAM Nvidia Quadro 600
Testing in C3D2012, using tutorial drawing "Sections-Grade-Label", selecting 2 sections depicting the existing ground and datum. Note that the datum in the drawing stops correctly where it intersects the ground:
However, when I gather the start/end points for the section links I get points that fall outside the limits of the datum section:
The second item appears to be the daylight point, but the first item is at the edge of the section view with an elevation that makes no sense. At the other side, item 17 is the daylight point and items 18-21 do not appear to be related to anything else in the sectionview, other than #21 which is again at the edge of the sectionview. What could these extra points/links be for? Intersetingly, the same section in C3D2014 returns 1 less point and all points through item 17 are identical, but those following all differ.
How do I remove excel data links from my Reference Manager (see attached image). What I have been doing is AutoCad erasing the graphics from my drawing but the link still remains in the xref manager window.
So I made a shop drawing of an assembly, which is very complex and took a great deal of time to complete. It has 3 sheets and a bunch of different views and information already on the drawing.
Now the thing is I took the assembly and made it an iassembly; but I did this in another file so I wouldnt screw up all the work I did before. Now I realize that I dont have the links to the shop drawing that I wish I did.
how to link the shop drawing to the new iassembly model?
I'm reconstructing an old document originally developed with PageMaker. I've recreated a half dozen pages hopefully with more uniform techniques. The original line art for the pages was created in AutoCad and some were scans. To bring them into InDesign some of the art is now in psd format and some of the newer art is in Illustrator AI format.
I've noticed that the pages with photoshop art print pretty quickly (about 30 seconds). The ones with Illustrator art take much longer (about 1:30 seconds). They go through a flattening process.
I print these 50 page books on demand and that additional time would add about an hour.
I guess the question is whether this is normal and to be expected or not. If it is I'll likely turn everything into raster before going into InDesign. That, however, seems like quite a bit of extra work. Going from AutoCad to Illustrator (to add stroke) then to PhotoShop to change to raster and then into InDesign seems like a pretty convoluted work flow.
There is an error "Corrupted memory" when on several machines executing some code. I know the error is in the wblockcloneobjects from drawing A to drawing B.
The strange thing about this error is:
We have 6 computers with Civil and Autocad.
Some users have no errors at all.
Some people only errors when executing it in Civil, som only when executing it in Autocad, some have it in both.
This is almost a copy of the VB.NET sample from autodesk.
This is the code where it crashes:
Imports Autodesk.AutoCAD.ApplicationServicesImports Autodesk.AutoCAD.DatabaseServicesImports Autodesk.AutoCAD.Runtime Public Class Class1 <CommandMethod("TEST", CommandFlags.Session)> Public Sub CopyObjecten() Dim oAppCivilDWT As String = "C:TemplatesCivil.dwt" Dim oAppAutocadDWT As String = "C:TemplatesAutocad.dwt" Dim oAppMechanicalDWT As String = "C:TemplatesMechanical.dwt" RunMyCode
[Code]...
All the modelpace objects needs to be copied to a template. (the full code does more stuff but this is the critical part)
I have a AutoCAD MAP drawing with the pipe size assigned as object data to various lines in the drawing.
Is it possible to display the pipe sizes as a text entity parallel to the line? How would I go about doing this. First prize would be if the value of the text changed whenever the object data is changed.
Can you take text from a drawing and export it out to excel? My thoughts are room numbers, employee names, department names, etc.
I need an excel spreadsheet showing this information to then upload to my CAFM Application? Is there an alternative to obtaining a report from a drawing?
Is there a way to display and control the visibility of property set data next to a tag or object in model space?
For example, imagine a floor plan such as a large hotel with a lot of doors. It would be nice to be able to look at the plan and see which doors have had their property sets filled out and which ones have not; and, it would be great if the visibility of the property set data could be toggled on and off so as not to clutter up the drawing when not needed.
how to suppress the Data Window from appearing after drawing a new feature? Most of the new features are populated with triggers and autonumbers, so I don't need to see the Data Window when I draw something new..
Is it possible to link / reference data from other drawings via labels? For instance, if I have a pipe network from a utility file and reference to a grading file. Could I add labels in that grading file that are from the utility drawing?
I want the pipe diameter minus the surface and maybe list an area of a parcel in one label?So I guess if you can take parts of the Civil 3D objects and tie that back to a general label type.
I imported survey data from a file into the drawing and created a surface from the points and figures. No problem. Engineer wanted to change the datum from assumed to known. At this point all figures have been copied to a new layer flattened and changed to 2D polylines in order to hatch. Then the figures reimported. I raised all the points with the edit datum and raised the figures with edit survey figures. Surface was adjusted and tweaked. Everything was fine. I open the drawing and all the figures are back at assumed datum and the points are on the right datum. Now when I tweak the surface it uses the bogus elevations from the figures. How can I get my figures to save the adjusted elevations?
I would like an VB application that from within autocad can open an excel file,from there select 2 columns containing x,y co-ordinates. Which when selected will draw a polyline in the acad drawing.
I usually do this the long way, but it seems I'm doing it more and more so would like to have it fairly automated.New to VBA and stuck at even opening the excel file....nevermind the actual selecting columns and drawing of the polyline!!!
I need to extract data from AutoCad Drawing using C# or VB.Net.
I have a Title Block which is not inserted using attributes. It has some horizontal & vertical lines drawn to look like a table and text added between them. See the attchment.
I need to extract data from that and display in Ms-Excel or in a datagridview.
I have a drawing that has erp data (somehow) attached to plain text (acadText). I have been unable to determine where this data is embedded or 'hidden" in the drawing - The attached drawing has three text entities, each with erp data attached.
Most of my VBA programming is in Inventor and my AutoCAD coding is not that strong. I have tried listing the text, browsed the drawing database (vLisp editor), tried the data extraction tool and run (entget (car (entsel))) and so far have been unable to find the embedded data.
I am trying to access the embedded data because the erp system updates the visible text with the BOM item number when the BOM is changed in the erp screen (which is very time consuming and a big pain), however this fails when our drafting guys take a shortcut and change the number manually. With multiple balloons, we cannot tell which one(s) have been changed manually. I am hoping to code a macro that displays the embedded data which can be compared to the visible text value.
I want to link Microsoft Excel data with AutoCAD drawing (like dimension or values). When I made some changes in Excel data, value in AutoCAD drawing can be changes automatically.
Is there any way to determine the source drawing of a dref'ed object? I'm not seeing anything in COM or the .NET API's, hopefully I'm just not looking in the right place.
I have a 2011 Civil3D drawing with Data shortcuts in it. I need to replace the source drawing path of the data shortcut with another path. Is there a way to change this either manually or, preferably, programically. At some point we'll need to batch through the drawings and change this path information. Is this information is stored in a drawing dictionary somewhere? If so, where? If not, where?
Updating the .XML data files doesn't appear to affect data links already in the drawing.
I was trying to use data extraction to create a table that can list the blocks in the drawing and descriptions in AutoCad 2012 windows version. the software didn't recognize my blocks. When I starts trying at my mac version of 2013, I am even more confused on how the create a table that can list the blocks in my drawing.
I have data in an Excel spreadsheet that I want to insert into the drawing in a table format that replicates my spreadsheet formatting and creates AutoCAD entities as opposed to a bitmap image or the mess the TABLE command generates - I'm looking to keep my text consistent within the drawing and I still use the old SIMPLEX font.
I would like to automate drawing process for certain data. Using some LISP codes User will be asked to provide some data and using that data an automatic drawing needed to be developed at Drawing editor of AutoCAD. For example;
Enter the width of Sheet: 50 mm enter the length of Sheet: 200 mm Enter the sheet thickness: 5mm Enter type of feed: Automatic Are there holes in Strip: Yes/No Specify nu of holes: 5 Position of holes Centre: 5,5 Distance between the holes: At an interval of 20mm each
I am working on roadway project where I am using Pipe Networks to layout the drainage infrastructure. I have set my working dwg up so that I am data referencing the existing surface and proposed alignment. I have set my pipe network up so that it is also referencing this surface and alignment. Everything was working fine. Labels were pulling the correct information from my surface elevations, and stations were being referenced as well, until I got a message that recommended that I recover my drawing.
I ran recover and my surface and alignment data shortcut disappeared. My pipe network now shows questions marks where there were once stationing and it appears that the surface and alignment have completely disassociated themselves from my drawing, however they appear in the prospector, but cannot be refreshed. Again the data shortcut symbol is no longer next to my surface and alignment, but there is a symbol telling me that those objects are being referenced by another object in my drawing (my pipe network). I have tried refreshing, resetting the working folder, all to no avail.
Occasionally I get the following message when trying to add data shortcuts.
"The drawing has not been saved yet, please save the drawing before creating data shortcuts" Only I have saved, this still occurs after either a full or quick save.
Shutdown Civil and reopen still gives the same message..The problem seems to be when you are saving to any other version of Autocad than R2010. Save as R2010 and it works.Mike Evans
Civil3D 2013 / 2014 British UK Windows 7 Professional 64-bit Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz (8 CPUs), ~4.0GHz With 32768MB RAM, AMD FirePro V4900, Dedicated Memory: 984 MB, Shared Memory: 814 MB
