There must be a simple way to do this. I'm working on a drawing that's all dimensioned with Arial as the standard font.
I need to make ONE line in the title box a different font; I'm using a font called CHILLER. When I go to DIMSTYLE and change from Arial to Chiller, the whole drawing changes to CHILLER.
I just want the one line to change, so I have two fonts in the same drawing.
Is there a way to get a listing of all fonts used with in a drawing?
View 1 Replies View Relatedin Inventor I use my own library with different layers, font types, colors, lineweights etc. In Inventor drawing it works well. But after exporting to DWG only colors of different layers stay the same; all fonts, lineweights change to one (maybe some kind of default) font, lineweight.
How could I repair that, I need drawing in DWG to look like the same as in Inventor. I have tried to use "Configuration" in DWG file exporting option and I have created my own configuration, but it did not work... I simply do not understand how it works. If the "Configuration" in DWG file exporting option is the clue -
documentation showing how to change the fonts on multiple layers in CS1. I remember that I have to link the text layers and use the type pallet,
View 1 Replies View RelatedIn my company they draw out multiple pages of construction drawings in 1 file. They do all their sketching off to the side and then bring the finish detail onto the sheet that will be plotted out later.
They then start a new sheet below it and continue onward until they have 20 plus drawings in one DWG file.
What I want to do is print each drawing individually to whatever plotter or printer I set up. I can't batch file as I understand it because there are so many pages of a print in 1 drawing. Because all the DWG file has multiple pages I have to go thru several windows to get each page plotted out.
Is there a script or batch file that I can use that I can set up the plot and then for example highlight the page I want to send to the printer then go to the next print, highlight it and it gets sent to the printer without having to set up the plot again?
We use Autocad 2000 so I am working with a basic set up here without a lot of frills the later versions have. I am trying to get them to seperate the pages but that isn't working for the earlier drawings they have done.
I want erase text in all drawing using batch proces. example i want erase text like "as-build" . i have 50 drawing i want erase using batch proces
View 1 Replies View RelatedI need to convert about 60 autocad drawings to pdf. Is it possible to convert all drawings in one operation?
View 1 Replies View RelatedI design press tools. Is there any ways in inventor 2012, where I can have only one common sketch in zero height and extrude profiles in different heights. Like plate no 1 @100 to 120mm (in vertical axis. A 20mm thick plate placed at 100mm above zero plane.) and plate no 2 in 150 to 175mm height and so on.
View 6 Replies View RelatedI put in 3 seperate hole tables in a drawing, labeld one counter bore holes, one dowel hles and one jack screws. used the selection hole method and all the tags were the same starting with A1 ...
Any way to control multiple hole tables so they use different tag numbers
In my company there are a lot of standard parts with variations. An object can have for example a left and a right variation, or can have three a different heights. I've created and iAssembly with the different variations, in which every member has a different part number. I'd like to make an overview drawing containing all the variations of that object, so the user can easily see the options and can choose the one he wants. On the sheet I'd like to have views of all the different members of the iAssembly, plus a table of all the members with their part number. It was no problem to create the views and the table. But I have two other questions.
1. I want to show the name of the Assembly with the view. So I'd to have in the view a text with the description of the Assembly-member, which is linked with the Assembly. I've tried to use a balloon to tag the assembly, but this only balloons the parts of the assembly. (How) can I do this for the whole of the assembly?
2.When I make an overview of all the columns we use, I'd like to align all the views at the bottom of the view, so you can see that all the columns have different heights, and how they differ in relation to each other. When I align the views with each other, the alignment is done in the middle of the object, not at the bottom. Is there a way to choose what lines of the view must align with each other? Or a way to align the views to a line (for example in a sketch)?
I am currently working on a product where I want to make 2 part lists in my drawing of the same assembly. The first parts list has to view all the parts that are always delivered with our product, and the second one has to show the optional parts and features that could be delivered with the product.
I want both lists to be categorized the same way (comments, material, name), I want the numbers of the list to be chronological (also I don't want the second parts list to start the numbering at 1) and I want both lists to stay connected with their balloons.
Is there any way this can be done, like adding or removing part links to the list manually?
i have a standard template(page layout) DWT file, that i need to apply into multiple drawings. is it possible to create a scipt for that cause i have 100 dwg that already has a template that i need to replace by the new one.
heres a script that doesn't work:
-INSERT
"TBLK1=V:BlocksTBKL2.dwg"
0,0,0
1
1
0
ZOOM
E
(entdel (entlast))
QSAVE
I'm trying to 3d print an ABS mold of an 80" long by 6 inch high object. I can't figure out how to section my model into the multiple 6" sections, though I know I'll need 14 roughly the same size sections.
View 4 Replies View RelatedI'm fairly new to the AutoCAD API for .NET, and for the last month or so I've been googling about, looking for comprehensive documentation on the Autodesk API (their equivalent of man pages). I've yet to find anything that describes each method and class in the API.
My goal is this: I'm trying to figure out how to copy the contents of all drawings in the same directory into a single dwg file. What subsets of the AutoCAD API should I use to do so?
I want to print multiple drawing in a single layout (see picture) . It is possible in autocad to setup printing once? For example: One project contains 100 A3 drawing, one layout contains 20 A3 drawing. Up to now, i print to pdf separately, and i combined the 100 pdf in one file.
And i print from this file. (only in this way succeed to print collating multiple copies). But if the project changes, I could start all over again. Is there a solution to publish an combining the sheets to print immediately?
I have a drawing which is referencing a .ipn model, the .ipn model has all of it's trail line invisible however the drawing is showing them all visible. What I am trying to do is find a simple and quick way to turn off the visibility of ALL the trail lines in the drawing without having to pick out each one and ajust manually, The model .ipn is quite complicated and has many trails on it so I really need a way to turn off the visibility of these in the drawing.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
when i copy paste this drawing from autocad architecture 2013 to another drawing it goes into that drawing in multiple scales
before after
I have checked all ins settings, I have tried to block it and unblock it, all items are there, some are just super small, some are normal.
I'm trying to plot a lot of drawing files that are in model space. We use to do this with batch plot. Is there still a way to do this in 2009.
View 7 Replies View RelatedI am trying to create a C# program to do batch Title Block attribute updates on selected AutoCAD drawings.
What I would like to do is keep the AutoCAD interface hidden, and just display my custom form which would allow the user to select the drawings that they wish to process.
And then the custom program would load each drawing behind the scenes and update the Title Block attributes, but the AutoCAD interface would remain hidden.
Is something like this possible with AutoCAD 2010? Are there any examples doing something like this (showing a custom form at startup, etc.)?
PS We do have newer versions of AutoCAD available if needed. Our engineers use AutoCAD 2010, but we could use a newer version for this standalone tool which would only be used by 1 or 2 people.
I am creating a template for our title block. We normally will have multiple assembly called out on one drawing. So I created a parts list without headings and built the headings into the title block. The first parts list I enter will anchor to my border, but when i enter the second parts list, it will not anchor to my previous parts list like I would like.
View 1 Replies View RelatedThis is something I should know as a long time CAD user. I have line of points, ~200 on the screen and I want to draw a polyline through them without selecting each point. I know there was a command to select the first point and the last and ACAD would draw the line between. I am using AutoCAD 2010.
View 3 Replies View RelatedBeen trying to show multiple layers/coatings in my drawing for several hours now, and finally defeated,
I have a revolved part that's made of multiple layers -- aluminum, for example, with an anodized coating and then a paint on top. I need to make a detailed drawing to show how thick each layer is, and to that end, created the part profile, added an offset rotation for layer 1 and then another offset rotation for layer two. They're thus symmetric and in full contact, but separate, distinct layers. No problem.
Turning this into a precise drawing, however, is a bit harder, since all of the layers render into one monolithic revolution. I need to show those layers distinctly, like in the png file attached. Is that possible?
I need multiple (say two) instances of the same text values (in the same drawing) but in different formats.
Consider this: I have a drawing sheet with a title block that contains the drawing number and the author's name at the bottom with some other drawing details. Now I wish to have these "values" arranged in a matrix form at the top also, for indexing purpose.
TitleBoxMonoSpace.png
One way is to manually enter each value, one by one, in the matrix box but that would be too time consuming. So, is there a way to automate this; where I can enter the values in the bottom title block, which would automatically update the above matrix?
I believe it can be done using a combination of Attributes and Fields but am just not getting it. To make the issue even worse, I need Numbers without hyphens (-) and only Initials of the author's name!
Is there a way to sent print to a selected printer by choosing multiple dwg files thru Folder directory without opening autocad? For example if I want to print 12.dwg, 13.dwg, 14.dwg and 15.dwg by just choosing these dwg files on my directory.
View 2 Replies View RelatedI need to create a adaptor to go from one 96 hole array pattern to a smaller 96 hole array pattern. The pattern gets smaller in both X and Y. This would go from vertical hole to angled hole back to vertical hole. One or both of the vertical sections could be removable to allow this to be a drilled part. The center section would be a solid block.
Since each hole will be at a different angle (in two different planes) it seems like I would need to create a separate plane for each hole and extrude from that plane. In addition to being error prone, this would take a large amount of time. Is there an easier way?
It would be straightforward to create a block with points for the large 96 hole array on top and the small 96 hole array on the bottom. Is there some kind of point to point method of creating a hole at an angle? A construction line could be drawn point to point but is there a way to make a hole from that?
How do I create Multiple Levels in a single Drawing File
View 4 Replies View RelatedI'm laying out a drawing with all tabletops used in our project for a linolium- fitter to set a price on covering the about 12 tabletops in total.
I dont know if this is correct English or if it make sense at all, but what I was wondering about was: Could you retrieve the total m2 of all the tabletops in a drawing? Or do I have to go back to the aim and get them one by one?
I found that I can right click a dimension in a drawing and select "Move Dimension" which then prompts me to select an alternative view in which I want the dimension placed. Is it possible to control-click multiple dimensions once to do this all in one fell swoop (e.g. I decided my view is too busy and want to move dimensions to a newly created detail view of that area)?
I'm using Inventor 2010
Can the Plot command be used to combine multiple drawing views into a single DWF file?
View 1 Replies View RelatedHow can I load multiple dimension styles into an Inventor drawing file without loading them into a template file?
View 1 Replies View RelatedI have an exisitng drawing with 80+ layouts tabs that I would like to copy to a new template drawing.
I tried to use design center but to no avail.
How can I do this?
Running Windows 7 Pro
3.20 GHz
12GB Ram
AutoCad 2013 64bit
