I'm using AutoCAD 2013 and I get a fatal error when it pulls up a print preview. If I have "Publish in Backgound" selected it proceeds to print. The error only appears to exisit when it pulling up the print preview. I have installed sp 1.1. I've repaired and reinstalled also. My AutoCAD 2012 is publishing fine.
I'm using Inventor 2014 with Service Pack 1 with Desktop Content Center enabled on a single machine. I've also installed Vault Basic 2014 on the same machine. Operating System is Windows 7 Professional.
I've edited my non-vaulted and vaulted project files to create a Custom Content Center Library called Zzyzx. I've started a new Assembly and entered the Content Center Editor to add files to the Zzyzx library. I've copied the Inventor ANSI fasteners section into the Zzyzx library, using the Copy To method with links enabled. So far, so good.
After copying the entire Inventor ANSI fasteners to the Zzyzx library, I created a new column called DESCRIPTION within the Heavy Hex Head Bolt - Inch series folder. Using and expression, I've modified the string values of the just created DESCRIPTION column. I've elected to map DESCRIPTION to the Project.Description iProperty. I use the OK button and each row in the new column gets populated. Update Lightning Bolts are displayed at the far left of the dialog box.
I then use either the Apply or OK button and then Inventor displays a Publish Error message box that states: Non-unique filename(s) found in members. I've checked the file names and I see nothing that's repeating. I've tried using a new file name, but that doesn't solve the issue.What steps must I take in order to successfully edit my Custom Content Library called Zzyzx?
I've got a persisitant problem with the publishing feature in autocad. I know how to set up bulk print of drawings using publish.
However the drawings are a mixed lot (some in paper some in layout). Is there a way to determine the state of the drawing without opening each one. In my case there is thousands of drawings and of course i do not have the manpower to inspect each one.
After upgrading to 3.5 from 3.4.1 I received this error when attempting to publish new photos to my harddisk. First I thought the problem may be related to access rights. I am running Win7, 64 bit. So I reset the read/write rights in the export folder and the LR catalogue and AppData folders. No success. Then I opened a new cataloge and imported the old one in order to start "from scratch" - no success, publishing collections were not importet. Finally I switched back to version 3.4.1, and ... it works again
I get a display error during the execution of some of the commands used in AutocadLT with Windows 7. It occurs when I choose a command along the bottom of the display area just above the command window (offset seems to be the worst offender. As soon as I choose the command, the computer locks up for a second or two then the screen goes black. Most of the time it will come back with a white screen in the rawing area and I will have to use the regen command to continue editing. it will sometimes do this numerous times before I can complete the command. (offset).
The error displayed from the task bar is:
Display Driver stopped responding and has recovered Display driver Intel Graphics Accelerator Drivers for Windows 7(R) stopped responding adn has successfully recovered.
I am using Inventor 2014. I am receiving an error while closing a drawing. The error says "One or more drawings are being computed and are currently in raster state. The document(s) may be closed and pending updates will resume when the document is reopened.
Do you wish to continue closing?"
The drawing shows outdated views which I tried updating but they do not update. When I am trying to print the drawing, it shows incomplete drawing.
A colleague of mine made the stupid mistake of using an unauthorized personal computer to save a work file, but she used an educational-licensed AutoCAD.
We do use legally purchsed and registered ACAD 2012 in the office. However, as expected, the file has been marked as being made by an educational version of ACAD and, therefore, cannot be sent back to our client.
A superficial search shows the solution as saving to dxf and back to dwg.
However -and herein lies my problem- when I save as dxf, the following error occurs:
"Error in LTYPE Table Linetype name with vertical bar is not marked dependent on line 9540. Invalid or incomplete DXF input -- drawing discarded. Press ENTER to continue:"
And then nothing happens. I used both the "save as" features, as well as the "dxf out/in" and, since both seem to be the same, neither worked.
I have created a new data shortcut project folder, i have the data shortcut set to the drive & the correct project, yet i cannot associate the drawing to the project. Even when I do attempt to set it to the correct project, it will not register. I have tried the "associate current dwg to project", as well as the "associate multiple dwgs to projec"t, yet it will not recognize it at the top of the screen.
Windows 7 Professional 64-Bit Intel Xeon 3.30GHz 8.00GB RAM AutoCAD Civil 3D 2014
I am trying to convert my AutoCAD inventor 2013 file to a standard 2007 file by going "Save As" "Save Copy As" and then "Autocad DWG File" but i keep getting up a message "problems encountered while saving the document" How do i repair this?
I am using 2012 version of CAD. I usually use classic mode. My files consist of alot of xrefs which are saved in different CAD versions. Whenever I scroll on my drawings i get a fatal error. I am not sure why this happens. Everytime a fatal error appears I have recover all the xrefs and the drawings those are opened in my system. Also, If i open the file directly from folder it gives me fatal error. so i have open CAD window first and then i have to open my drawings.
I have created a new data shortcut project folder, i have the data shortcut set to the drive & the correct project, yet i cannot associate the drawing to the project. Even when I do attempt to set it to the correct project, it will not register. I have tried the "associate current dwg to project", as well as the "associate multiple dwgs to project", yet it will not recognize it at the top of the screen.
Windows 7 Professional 64-Bit Intel Xeon 3.30GHz 8.00GB RAM AutoCAD Civil 3D 2014
Strange issue when printing a drawing. For some reason whenever I send this drawing to print the 'squared' symbols get replaced with either some overlapping numbers or the letter E.
Unfortunately I can't take a photo of the result but I'll provide an image of what I'm trying to print.
Plotting as a .pdf works fine (print preview also looks fine) and is the current work-around but it would be good to get a proper solution because it's likely these will be printed again from AC in the future and we'll forget and the client will get a stodgy drawing and I'll be sad.
I am operating 3D Civil with Windows 7, 64-bit system.
Most of the time when I close a drawing, particularly when I have two or more drawings open, the program closes down with the following message "Autocad Application has stopped working - Windows is collecting more information about the problem"
When I open Inventor, the message "cannot load..." pop-out. Although I still can create the 3D model in Inventor but everytime when I open my existing or new drawing file (.idw), Inventor will occur fatal error and closed.
I received the drawings with comments from consultant.The cad drawings are infected with stamps.I was ordered to use such drawing to update the routing of the services.When I use DXFOUT to change it to the DXF version 2000.I can't open it the dxf drawing.the error like below when i tried to open the dxf:
Undefined shape 4 Invalid or incomplete DXF input -- drawing discarded. Press ENTER to continue.
I had a corrupted file that crashed every time it's opened. Now the drawing recovery manager has this message when i click on the folder to try and remove the temp files. how to remove the recovery folders so this doesn't keep happening?
Drawing Recovery Palette Error Message:
Civil 3D x64 2012 Win 7 x64 Ultimate I7 3820 (3.6ghz quad core with HT) 32gig RAM (Corsair XMS3 4x8g) Intel x z79 mobo (BOXDX79TO 2011 socket) Radeon HD 7850 2gb GDDR5