AutoCAD LT :: Circular Water Tank Design

Aug 6, 2013

I have to design 35m dia panel tank (water storage), the shell, roof all design i done. How to design foundation of tank?.

View 9 Replies


ADVERTISEMENT

AutoCAD Inventor :: Creating Water Flow From Tank To Pipe?

Dec 28, 2013

how to create water flow inside inventor , i have a tank i want to fill with water & water then will flow through a pipe of certain diameter & length

View 1 Replies View Related

AutoCAD Civil 3D :: Association Between Design Speed (V) And Radius Of Circular Curve (R)

Aug 1, 2013

The association between design speed (V) and radius of circular curve (R),

As the R is positively related to V according to the equation (attached), then I expect that the C3D changes R value as the value of V is changed.

For example, on the attached screenshots, the R value of horizontal alignment is built based on a design speed of 100km/hr. Now if the speed is changed to 50km/hr, then why the value of R is not automatically changed to be compatible with the new speed?

View 6 Replies View Related

AutoCAD Civil 3D :: Canal Design For Distributing Water To Irrigated Lands

Dec 10, 2012

I want to know that whether Canal Design is possible in civil 3D or not.

If there is any software that deals in designing of Canals for distributing water to irrigated lands.

View 2 Replies View Related

AutoCAD Inventor :: Making Design For Centrifugal Water Pump - Creating Loft

Aug 12, 2012

I am making a design for a centrifugal water pump, the rotor was no problem, but I'm having some trouble designing the top case. I thought it would be easiest to create the channel for the water outlet using a loft feature.

I attached the ipt. there are two sketches, and I need a loft from the small to the large one, all the way around the circle. when you see it you'll probably understand what the result should be, but, no matter what I try, either I get an oddly shaped loft, or an error.

View 9 Replies View Related

AutoCad 3D :: 3D Dished Head On Tank

Jul 16, 2012

I am using AutoCAD 2012 and I noticed that the dish/dome command is gone. How do I make a dish?

View 9 Replies View Related

3ds Max Modeling :: How To Create Circular Shaped Elevator With Circular Fence

Feb 25, 2013

I'm working on a UDK level for a college assignment.

I want to create a circular shaped elevator with a circular fence around it that's roughly half the size of an average sized character standing on it. I then wish it import this as a static mesh into UDK.

Here are 2 sketched up designs of the elevator, what I want to create.

1st image: [URL]....
2nd image: [URL]....

I am very new to 3DS Max so I would prefer a list of steps to follow to create this elevator with a a fence,

View 2 Replies View Related

AutoCad 3D :: Modeling A Precast Concrete Tank

Jan 17, 2013

I have been trying to draw a precast concrete tank and have run into a problem. The tank walls are not constant thickness. At the bottom they are 3.5" thick and taper to 3" thick at the top. Also, the top dimensions of the tank are longer and wider than the bottom dimensions of the tank. My solution has been to draw the outside bottom as a rectangle and offset the rectangle by 3.5". Then repeat this for the top dimensions, set the top two rectangles at the correct elevation and loft them. Then, I press-pull the center out of the tank. This results in a quasi-correct representation of the outside tank but the wall thickness does not taper correctly and the walls are hollow.

View 9 Replies View Related

AutoCad 3D :: Select Particular Face Of Tank Upon Which Want To Align UCS

Mar 2, 2013

I have been able to draw the precast concrete tanks I needed. I drew several models and saved them as WBLOCKS to insert in new drawings. The problem is that I don't seem to be able to select a particular face of the tank upon which I want to align the UCS. What am I missing with regard to blocks and UCS alignment?

View 2 Replies View Related

Photoshop :: Fixing Bright Green Water.. Into Clean Water

Jul 4, 2004

I have a pic that has a really pretty view of a bridge over a little stream. Only problem is the water is covered with slimy green algee.

View 5 Replies View Related

AutoCAD Inventor :: Splitting Sections Of A Tank Shell

Jun 1, 2012

Is there a way to use the Split Solid tool to partially split a circle and have multiple solids after.

Ex) I would like to cut the tank at the 180 and 270 deg marks. Using the split tool still cuts through 0 and 90. I tried drawing a line from a top view that started from center going through 180, but it still goes through 0 as well.

I've attached an example shell of where I would like to have 6 solids after.

View 5 Replies View Related

Photoshop :: Transform Brush Of Water In (water Authentic)?

Mar 7, 2012

any tutorial to transform a brush of water, in "water authentic"? Color, brightness, etc .........

View 4 Replies View Related

AutoCAD Civil 3D :: Bolted Manhole Rims And Closed Tank?

Dec 27, 2012

I had a chance to use the old StormNet software extensively in my previous company. This is my first time that I'm using it under AutoDesk. It appears to work similarly. So now I'm trying to model a small but a bit of a complex system.

I have a modeling scenario where I have a storage tank with two orifices. The first orifice outlets to a 10 inch diameter pipe which eventually outfalls into a stormwater treatment area. This area will allow ponding. Due to site topography a portion of this pipe run will be pressurized with the outlet set just low enough below the 1st orifice elevation at the tank. The second orifice outlets to a 12 inch diameter pipe which connects to the underground storm drain system via gravity. This second pipe run will only take on water that exceeds the capacity of the first. With this scenario I have  a few questions:

1. In trying to model the bolted rims to make the portion of the system to work as a pressurized system, my understanding is that I have to set the surcharge elevation (at the junction) high enough above the max rim elevation. I have set up the surcharge elevation high enough, trying different elevations and the max water elevation in all cases is exceeding the max rim elevation.

2. My storage tank is a close tank. Is there a way to ensure that is modeled as such or does the program assume is a storage node such as a detention pond?

View 3 Replies View Related

3ds Max :: Make Water Particles To Collide With Water?

Jul 7, 2011

I want to make a fountain that has water jets that cause ripples when they hit the water. I have tried the basic reactor water and Pflow setup, as well as super spray, but neither seem to work. Is there any way to accomplish this without "faking" it by doing something creative with the water's texture?

View 9 Replies View Related

Maya Modeling :: Show Piping In A Tank

Mar 20, 2012

I have modeled a tank(storage) and i need to show some of the piping that is inside the tank. I tried removing some faces and extruding the edges, then some beveling, to show some thickness but that really messes up the smoothing around the hole. Is there a better way to do this to maintain the smoothness?

View 6 Replies View Related

After Effects :: How To Animate Tank Treads In 2D Picture

Feb 3, 2014

I have a .psd picture of a tank and try to animate it in AE by rotating its wheels and tread (or track?). The only solution i have come up with is to slightly change tread layer's x and y positions in every frame, making it to vibrate. However it does not create rotation illusion which i'm after - the tread vibrates, but doeas not revolves around the wheels. If there are other solutions to make tread layer rotate around tank's wheels, i would be glad to hear about them. All 7 tank's wheels are separate layers and the tread layer is above them. The rest of the tank's layer is above tread layer

View 2 Replies View Related

AutoCAD Inventor :: Importing Design With A Design?

Oct 9, 2013

I wanted to use the program to design a robot for our school vex competition. Vex has provided cad files for all the parts. So, how i can import the seperate parts into one design. I can only open each part individually but cant find a way to combine them so can assemble the robot in one design.

View 2 Replies View Related

AutoCAD Inventor :: Copied By Design Assistant Assembly Cannot Be Altered In Design Assistant

Apr 10, 2012

I  just made a copy of assembly in Design Assistant.I opened the copied assembly in Design Assistant to make some changes.Parts are accessible but I have only "Clear" option possible. URL....

View 2 Replies View Related

AutoCAD 2013 :: Fonts To Water Jet

Aug 8, 2012

Getting my fonts, preferably cursive styles, into water jet capable lines? I need to water jet some lettering for a sign cutout.

View 3 Replies View Related

AutoCAD Architecture :: Circular / Oval Slabs

Mar 8, 2011

I'm trying to create an oval/circular shaped reception desk, which needs me to create a circular slab. It won't allow me to apply slab properties to circular objects, I have also tried creating a square slab, then cutting holes in it... but still, it won't let me use circular linework to cut holes in slabs. Drawing an oval using straight lines would be innacurate and too time consuming.

Any alternative methods of creating something oval that can represent the worktop of a reception desk, or perhaps knows how to create a circular slab?

View 2 Replies View Related

AutoCad :: Possible Circular Reference To Current Drawing

Sep 24, 2011

I attach x-ref in one of the drawing......and then next day i open drawing is show but xref does not not show and i gives that message..............

Error: Possible circular reference to current drawing. *Invalid*

what should i do?

View 1 Replies View Related

AutoCAD Inventor :: Cut Two Circular Profiles On XZ Plane

Jan 23, 2013

This sheet metal part has two bends, and was created with a lofted flange feature on the XY plane:

It was then cut by two circular profiles on the XZ plane:

When the flat pattern is created, it seems to work just fine as long as the diameter of the circular cut is below a certain value.  Once the diameter is increased beyond this value, the flat pattern returns a cryptic error and does not compute:

I know that the bend geometry does NOT pass through the bend axis,  so I am left guessing at what the real problem is.  I have attached the part.  The part currently has the parameter called "Tank_ID" set to 500 in.  To see the error, change the value of this parameter to 600 in.  For me, the flat pattern breaks between the values of 512 and 513 in.

Why does the flat pattern work at 512, but not at 513, since there is no significant difference in geometry?

View 3 Replies View Related

AutoCAD Inventor :: Non-Circular / Non-rectangular Pattern

May 14, 2013

I am currently trying to model a multi cavity mould tool. The cavities themselves do not follow either a circular or rectangular pattern.I have modelled one of the cavities using a revolve internal to the tool. I have also sketched out on the upper surface centre points where I need the cavities to be.

I was hoping I would be able to copy the cavity feature, select a base point and then use the centres from my second sketch to place the cavities.

I don't seem to be able to find this option. The copy and paste feature will likely work but it is hugely long winded positioning each cavity individually. Any method I might be able to use to model such a part?

View 2 Replies View Related

AutoCAD Inventor :: Can't Change Circular Pattern

Nov 12, 2013

I have modelled a disc, which has 6 cylindrical extrusions in a circular pattern on the disc surface. I want to change the number of occurrences (the "placement") to 9 but the "OK" button is disabled. I get the preview od the 9 occurrences, but it will not complete the command.

View 3 Replies View Related

AutoCad 3D :: Difference Between Circular And Nested Xref

Aug 18, 2011

this question is related to 3D modeling in HVAC detailing, piping and plumbing

What is the difference between a circular and nested xref?

View 4 Replies View Related

AutoCad :: 3D Printed Circular Object Is Actually A Polygon?

Aug 26, 2013

I used 2 3d printers to print the same object(a funnel with a circular section): Makerbot replicator 1 and 2.The result was a shape which was not circular in section but polygonal. What can I do (or the owners of the 3d printers) in order to obtain a circular form?

Initially I thought it was displaying it as a polygon (”shade” command) to save memory usage but when the actual product turned out non-round I concluded that I (or the owner of the printer) may be doing something wrong.

palnie3.1.dwg
Untitled.jpg

View 9 Replies View Related

AutoCAD Civil 3D :: Create Water Drop

Aug 20, 2013

Any finding the Create Water Drop very slow in 2014?

IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600

View 3 Replies View Related

AutoCAD Inventor :: Simulation Of Water From Bucket

Dec 16, 2013

I want to simulate the projectile of water from  the bucket while tilting the bucket is it possible to make such type of simulation in inventor 2012?

View 3 Replies View Related

AutoCad :: Water Hatch Pattern File

May 21, 2012

I have Water Hatch .pat file can share ? Looking for those like wave kind of hatch.

I know i could use superhatch to create this by using a few arcs but im looking for a faster way.

View 1 Replies View Related

AutoCad :: Metal Fab Plant - Flow Water Jet

Mar 23, 2011

I work at a metal fab plant as far as drawing im learning here is my problem i can draw a part save it as a dxf file but when i load it onto flow path instead of a soild cut line it a broken line.

View 6 Replies View Related

AutoCAD Inventor :: Text Alignment In Circular Shape

Jul 16, 2013

I have text in a circular shape but how do i place the text inside the part on to the front of the face?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved