AutoCAD LT :: 2011 Out Of Memory In Vista 64bits
Nov 8, 2011
Unfortunately we had upgraded LT 2008 to LT2011. A lot of problems arose:
- LT freezes after starting wich we could only solve by upgrading .net framework to v4. Without v3.5 LT runs butÂ
we are not able to use the ribbons, only LT classic. Is this solvable?
- When using LT, after 5 to 10min the systems runs out of memory and shuts LT down. We are under a workstation
with VIsta 64 bits with 8Gb RAM, QuadCore Intel 2,4Ghz, and 512Mb graphics.
View 8 Replies
ADVERTISEMENT
Jan 7, 2009
I am running Photoshop as part of the CS4 Suite on a bootcamped intel mac pro towers using Vista Business with 4 gigs of Memory. We are running in 32 bit mode because of the Apple screw up with Carbon 64 so that both sides of the house windows and mac match.
Photoshop is currently only seeing 1639 MB of the RAM instead of the performance on the Mac of about 3000 MB
So does anyone know what is going on here and how I can get Photoshop and or Vista to recognize most if not all of the RAM installed on these machines.
Specs are below...
Adobe Photoshop Version: 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Operating System: Windows Vista 32-bit
Version: 6.0 Service Pack 1
System architecture: Intel CPU Family:6, Model:7, Stepping:6 with MMX, SSE Integer, SSE FP, SSE2
Physical processor count: 4
Processor speed: 2793 MHz
Video Card: NVIDIA GeForce 8800 GT
Video Mode: 1680 x 1050 x 4294967296 colors
Video Card Driver: nvd3dum.dll,nvwgf2um.dll
Driver Version: 7.15.11.8048
Built-in memory: 2037 MB
Free memory: 1178 MB
Memory available to Photoshop: 1640 MB
Memory used by Photoshop: 55 %
Image cache levels: 4
Application folder: C:Program FilesAdobeAdobe Photoshop CS4
Temporary file path: C:UsersMGDAppDataLocalTemp
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:, 349.4G, 324.0G free
Primary Plug-ins folder: C:Program FilesAdobeAdobe Photoshop CS4Plug-ins
Additional Plug-ins folder: not set
View 9 Replies
View Related
Feb 28, 2009
if the 32-bit version of Photoshop CS4 can access more than 4 GB of memory if it's running under Vista x64. I'm not sure where the 4 GB limitation enters the picture--if it's the operating system or the application itself.
I've tried to use CS4 x64 as much as possible, but there aren't a lot of plug-ins available for it yet, necessitating the use of the 32-bit version at times.
View 4 Replies
View Related
Jul 13, 2012
I have a serious problem when hatching in AutoCAD LT 2011, it's making my PC hang but only when I'm using the 'Add: Pick points' command. It's so bad that I can't even call up the task manager to stop the process and I have to switch it off and on again to get it working.
I've never encountered this before with earlier versions of AutoCAD, is there a way around this? It's driving me nuts!
I'm using AutoCAD LT 2011 on Windows Vista.
Since opening my most recent backup file I think I may have found the cause.
I had inserted a .jpg image (150 x 150 @ 8KB) that I was using to trace around it and it was these tracings that I tried to hatch. I have since deleted the image and now the hatching causes no problems.
View 9 Replies
View Related
Aug 17, 2009
I buying a new PC and want to install Vista 64bit and later on go to Windows 7. how much memory will Vista 64bit take and how much will Windows7 take?Think I read somewhere that Vista takes 4Gb (is that right?) and I can live with that for some month but if Windows 64bit take the same I need to consider that and buy needed memory size from the start. Buying DDR3 16000MHz memory and a Intel CPU Core i7 Quard 2.66Ghz. How much is memory recommended for PS or Lightroom or Premiare pro running 64bit mode? So in total; are 6Mb memory enough for both Windows7 64bit and PS or do I need 12 Gb to work with normal speed and without problems.
View 10 Replies
View Related
Aug 30, 2013
I am running the 30 days trial version of the VS pro X6, but the added clips are muted. important before buying).
When I add a clip the sound is ONLY played when volume for the clip is 100% (other value makes the clip mute) and is the clip preview, not the project preview. (project preview plays only the added soundtrack- if there is any).
Even if volume is 100%, when exporting the project, clip sound is muted (only the added soundtrack will sound).
- Of course I have tested several clips, and with or without an additional mp3 soundtrack.
- I also installed the just released VS SP 1, but no changes.
- I export (Share) using Vimeo HD template.
- Problem is not shown if I use VS 11 (which I also has installed).
My system characteristics are in my profile and also here:
- Win 8 pro 64 bits
- Dell Inc. Vostro 3360
- 1.70 gigahertz Intel Core i5-3317U
The clip's properties are:
Type: .MOV
-640x480
-dr 11347kbps
-total br: 11619 kbps
-fr: 30
-Audio br: 272kbps
-channels: 1 mono
-Audio sample rate: 16khz
View 4 Replies
View Related
Apr 22, 2012
I think I've found a bug: PPX6 is not honoring the "maintain size" option while exporting as PNG.
To reproduce:
Create a new 24bits RGB 600dpi image.
Export it as PNG
Check the "maintain size" option (size controls get disabled)
Now change the "resolution" to 96.
Size now shows 0px 0px and scale 1%.
Uncheck the "maintain size" option and mark it again.
DPIs are now something like -491.
PhotoPaint X6 v16.0.0.707Windows 6.1 64bits 7601 SP1
View 1 Replies
View Related
Apr 3, 2012
Is there any way to put the 2011 topobase and the 2011 ArcGIS plugin into 2012 or 2013? Seems such a shame just to lost all of that functionality.
View 2 Replies
View Related
May 6, 2011
I am using corel x3 a long time but never, never had this kind of problem. When i work in corel enviorenment after i have finished my work i go to save my work. But then is the problem It Saves the file with Large Memory on it. let's say if the file normally would be 200 K, now it saves with 3 MB. And if i import some other files in my work then the saved file will be even bigger. If i Delete the files that were imported The Saved File will be Again the same SIZE ! Even if a take one part of the file, let's say if i import only one small text and put it in another file and save it like that, the saved file will be 2 MB. I had a lots of problems, i had saved files on this way with 23-24 MB and when i open them it takes like forever. When you look that file in corel it has nohing in it, absolutely nothing that should be 24 MB. But all of my important work is in that files how to make all things back to normal again,
View 9 Replies
View Related
Nov 4, 2011
I do have problem with my newly installed CorelDraw X5. Before X5 we used Corel 12 in our company.
I have project file (150 MB) with lots of text, bitmaps, vectors - about 100 pages. File opens but I can't save it. I always get OUT OF MEMORY error. I even tried to divide this file into 2 smaller parts but still doesn't work.
What I noticed - Corel X5 after clean start (without opened project) takes about 80MB of RAM in task manager. When I open project usage changes from 80MB to 1,2GB. While saving it takes 1,6GB of RAM and it crashes.
To compare - Corel 12 and after opening same project file Corel 12 takes much less of memory - about 770MB and it works without problem.Â
Where from comes this memory usage difference?
My PC:
Windows 7 - 32bit
4GB of RAM
Intel Core2Duo 2 x 3.0GHz
700GB free space on drive C:
View 16 Replies
View Related
Jul 22, 2009
when I try to open an existing file or create a new one -- the application will shut down unexpectedly and without warning.But I also experience application errors: 'Instruction at "0x1a3c4b6b" referenced at memory "0x00000028" Memory could not be read.
View 9 Replies
View Related
May 2, 2008
I run Autodesk Land Desktop 2004 on Vista, it works, kind of.
I get this error message when I open the program: "Error writing the acamap.sys file"
When I say OK to the message, the program starts working.
At the end when i close the program i get this message: " Autocad application has stopped working"
The next message after this is: " Download updates for 2004"
Any way to avoid these annoying messages?
View 7 Replies
View Related
Dec 29, 2011
Just want to know whether Google Earth Extension is compatible for Window Vista? Because received an error message when i try to load Google Earth Extension into my AutoCAD Map 3D 2010. Below are the step that i've done:
Install Google Earth Extension - No error (so i assumed the installation success).
Appload - Successfully loaded.
Menuload - Error message occurred as shown below:
View 3 Replies
View Related
Jan 24, 2012
My colleague and myself have a problem with the font Lucida in the header of a plan we designed. He's running Windows Vista and I am running Windows 7. I designed the header, but now he has to make some additional plans with that same header but if he opens the file with that header, strangely enough the font Lucida he uses is not exactly the same as the one I've used although the properties show they're all the same. Another colleague with Windows 7 has no problem with it. As you can see in the attachments I've added, the '1' is not exactly the same as well as the '-' so texts don't fit the boxes they're in anymore. We also can't really alter the font, seeing as Lucida is the font our client uses and requires for this project. We've tried overwriting my colleague's font by my LUCIDA-font in the location C:WindowsFonts but this didn't resolve the problem either.
View 9 Replies
View Related
Jan 4, 2013
We have a work station with C3D 2013 that has started crashing when trying to open the pipe network vista. We have to edit the pipes using pipe properties for the individual pipes. This makes it difficult when trying to edit a large network. The drawings work fine on other computers. It has something to do with the settings on this machine. What would be causing the crash when trying to open the vista window?
View 5 Replies
View Related
May 1, 2013
I am using Win 7-32 bit version, with 4GB RAM, Auto CAD 2010.When I try to switch from " Model " to " Layout" , the command line shows" Regenerating", several times.Â
Sometimes AutoCad will ends in " No response" and be forced off.Additionally, when I put 5-6 drawings in one file and edit it, my Auto CAD appears to be stupid, the cross can not catch the objective point, then no response, then forced off.
View 5 Replies
View Related
Oct 27, 2010
I keep getting this message come upÂ
"AutoCAD LT is running out of system memory. Continuing the current operation may result in program failure or loss of data. Do you want to cancel the current operation."
View 9 Replies
View Related
May 30, 2009
inventor shows that I have only 1,5GB memory but i have more how to increase it?
View 7 Replies
View Related
Sep 4, 2012
While working on assembly detail drawings my system pops up a message that " Running low on memory ".
View 3 Replies
View Related
May 3, 2012
C3D 2013 crashed on me earlier today with the above error. I've submitted several Reports after the crashes. I've tried rebooting, repairing, re-installing, uninstalling and reinstalling with reboots in between. I have a presentation tomorrow and I need to fix my C3D drawings. When trying to start C3D, as soon as the splash screen is gone, I get the "FATAL ERROR: Out of memory - shutting down" AutoCAD Error Aborting error.Â
C3D 2012 still works and AutoCAD 2013 works, but of course I can't edit my C3D objects.
View 9 Replies
View Related
Jan 31, 2013
When you plot to pdf in Civil 3D, my problem is that I need to go through all the different folders to the folder that I wish the PDF to be saved, and when I PDF the next drawing, I need to go through all the folders again to find the same location folder in which to save the PDF.Â
There is surely a memory path that saves to last saved location, rather than having to go through the different folders and sub-folders each and every time.
Before my upgrade to 2013 from 2012, it would save in the last saved location, now it defaults back 'my documents' on my C'Â drive.
View 3 Replies
View Related
Jan 30, 2013
We have not upgraded our computers in 5 years. We did upgrade the OS to Windows 7, 64 Bit and are running C3D 2012. We are currently using Core 2 Duo E8400 3.00 GHz with 4 GB ram. I am recommending upgrading the ram to 8GB.
We have a test computer with 8 GB of ram that I ran some timed tests to determine how much of a performance increase we will get. I timed opening C3D, opening drawings, rebuilding surfaces, rebuilding corridors, editing corridors with grips and switching layouts. Based on those tests I have seen almost no improvement that I can show with timed tests.
Memory usage was 70%-75% while running the tests when with 4 GB of ram and 45%-50% with 8 GB ram. The drawings I opened were from one of our largest project. The surface drawing is 50 MB with about 15 MB of xrefs.
Am I testing the wrong functions? Are our projects too small to take advantage of the additional ram? Why are most system recommendations I see in the DGs for 12 GB of ram or more?
View 8 Replies
View Related
Dec 30, 2013
I am doing some 3D renderings. I created a new material and gave it an image to use. I now made a change to that material getting rid of the image file, but no matter what, this texture is stuck in AutoCAD's memory or something. Am I missing something or will I have to delete this material and start over from scratch?
View 1 Replies
View Related
Mar 19, 2013
Civil 3D 2013, trying to edit a FG profile through the Profile Entities vista and Profile Layout Parameters dialog box. All entities in the vista are shaded (locked) and will not allow me to edit. Is there something that I am missing here? I should be able to edit the PVIs (or entities) correct? I couldn't find anything in documentation as to why these are shaded and not allowing me to edit them.
View 5 Replies
View Related
Jul 16, 2012
I just got the attached error message when trying to exit a sketch that I was editing. Windows says I have 11Gb available so there must be a problem with Inventor. I am now stuck with no way to edit the sketch without getting this error. It's a part that was migrated from 2011 format using task scheduler. Using 2012 SP2
View 1 Replies
View Related
Jul 25, 2013
I'm working with point clouds. is there any physical memory limitation working with autocad. because i had 32gb ram but didn't see over 4 gb for usage by autocad. my computer's os is win7 x64.
View 3 Replies
View Related
Mar 6, 2012
inventor 2012
64 bit machine
12gig ram
and it says I don't have enough memory! How can this be? Its not that complicated of an assembly. I have done bigger. I excluded all the part I'm not using and they are all basic plate and tube parts. There are less than 20 parts in the assembly.
View 2 Replies
View Related
May 10, 2012
I've recieved a drawing from a customer and i'm unable to load it. When I open it, it asks to be recovered because of a damaged file. I hit the recover button and starts to load the file but after a while comes up with an error saying "FATAL ERROR: Out of memory - shutting down." Is the file just corrupted? My memory isn't even being used. Specs are i7-2600 3.40 ghz, 16gb ram and sli nvidia 570 gtx cards.Â
I've also tried the recover command, but it did the same thing.
There was a second drawing they sent me too, but it comes up with a fatal error 0x0050. I've attached both drawings.
View 1 Replies
View Related
May 29, 2012
What is the reason for the error " Autocad is running out of system memory ".
when i open a drawing more than 5 mb, my autocad is getting very slow and this error is coming.
My system specifications are
intel(r) Core (TM)2Duo CPU
E7300 @ 2.66Ghz
3 Gb Ram
View 6 Replies
View Related
Feb 21, 2013
I could open my autocad and inventor dwg files (No I can't post them) fine w/ 2011. Now we upgraded to FDS 2013 and I keep getting this error.
Close programs to prevent information loss:
Your computer is low on memory. Save your files and close these programs:
Autodesk Inventor 2013
View 4 Replies
View Related
Nov 12, 2012
I have an iassembly factory that has both both iassemblies generated and checked into the vault.Both com up fine when toggling between both of them on the factory file.
My drawing BOM was looking fine until I added a couple of items to the factory assembly file (items are in all iassemblies). Now I get this "Member Count Error" showing up in certain line items.Â
I rebuild both iassemblies I can't get the BOM to generate properly. If I toggle to the one iassembly in the factory file the opposite one shows this error message in the BOM.
View 1 Replies
View Related
