AutoCAD Inventor :: Salvaged View May Not Be Accurate
Sep 28, 2012see this on a drawing view on the feature browser?
Inventor Professional 2013
Vault Collaboration 2013
ADVERTISEMENT
AutoCAD Inventor :: Dimension In Drawing Not Accurate
Nov 3, 2013The diametric dimension on the right, dia. 244.9 isn't resembling the real dimension in the weldment.You see in the sketch of extrusion 2 that i gave an internal diameter of 245.
View 9 Replies View RelatedAutoCAD Inventor :: Get Accurate COG Short Of Creating RH Assembly Instead Of Deriving The Part
May 8, 2012I have this assembly which includes a weldment and a derived / mirrored part where i need to identify the COG for lifting with a crane.
As you can see in the image (most components not visible), the COG is way off. The left half is the weldment, the right is the derived/mirrored part. Is there a way to get an accurate COG from Inventor 2010 short of creating a RH assembly instead of deriving the part?
Photoshop :: Accurate Placement Of Guides [View>New Guides]
Feb 13, 2008I have a number of vertical and horizontal guides to be placed, at different points. Is there a better way of placement rather than zooming up on the ruler area, watching the Nav coordinates and dragging and dropping? I'm really looking for a method which will I can key in the actual placement coordinates in some way, and the guide will jump to this point?
View 6 Replies View RelatedAutoCAD Inventor :: Get Sheet Number Of Base View For Selected Child View
Jun 21, 2013Is there a way to get sheet number of the base view for the Selected Child view (Mainly for Section. Detail Views). Because the Section views, Detail views (initially they would have created on the same sheet where the parent is, then they moved to different sheets). So we place the parent view sheet number.
View 1 Replies View RelatedAutoCAD Inventor :: How To Pass Break From Sectioned View To Separate Isometric View
Jun 27, 2012I started with a Left side view of a part and created a sectioned view right down the middle so you can see the insides from another view. the part is pretty big so i used a Break to shorten it to fit the page. I also placed a smaller and separate isometric view of the same part and want this view to inherit the same break. How can I do this? If I go into the display options of the iso view, all the cut inheritance options are grayed out and can't be clicked. I've seen this done before, but i'm sure i missed a step somewhere.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
AutoCAD Inventor :: Unable To Remove Hidden Line From View To Get Shaded View
Sep 23, 2013I made a drawing, but after using ilogic (ilogic is in drawing,assembly, part) in it, drawing view of a particular part is coming in hidden line, other are shaded as u can see in image.
Drawing view is associative, all edges shown, level of detail is master, view style is Hidden Line Removal with Shaded
Computer Config:
Inventor 2013
Intel Xeon CPU
2.67 GHZ
8 Gb ram
Windows 7 64 bit
AutoCAD Inventor :: Parent Section View In One Drawing And Child View In Another
May 6, 2013Is it possible to have the parent view for the section in one drawing and the child views in another drawing?
View 2 Replies View RelatedAutoCAD Inventor :: Detail View Arrows And View Annotation Are Not Showing
Apr 26, 2012I've created a drawing and when I create a detail view, the actual view appears in the drawing but the circle and arrows along with the view identifier are not showing up. It's like the visibility has been turn off. how to turn it back on?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
AutoCAD Inventor :: Make Exploded View Trail Lines Exempt From View Break Out?
Oct 31, 2013I have made an exploded view and placed it an a drawing. I would like to view inside one of the bodies to show where the exploded internals sit, however when I do a break out of the body the trail lines from the exploded internals also get sectioned. Is there a way to control the sectional properties of a trail line?
View 4 Replies View RelatedAutoCAD Inventor :: Projected Drawing View Doesn't Show / Design View Rep Don't Update
Sep 27, 2013After upgrading to Inventor 2014 we notice that the graphics do not work properly, and that the overall performance in drawings and modelling bad compared to 2013. Then we installed SP1 and now drawing views are disappearing, however when we select "shaded" view the view reappears and works perfectly..
Any workaround regarding disappearing views?
AutoCAD Inventor :: Create Detail View Of Isometric View In IDW?
Oct 3, 2013Sometimes when I try to create a detail view of an isometric view in my IDW, the "detail full boundary" option is greyed out? Why would this be? If I try an ortho view it works fine.
View 5 Replies View RelatedAutoCAD Inventor :: Showing Section View In Base View
Dec 13, 2012how to show section view in base view with out projection the component.
View 2 Replies View RelatedAutoCAD Inventor :: How To Make Section View As Isometric View
Oct 29, 2013I have a long shaft with parts mounted on. i want to section it and show the parts. i don't need to show the whole length of the shaft.
I know i can crop the isometric view, but this way i will not see the key hole which is on the other side, it's hidden.
If i make a section it 's in an orthogonal view only.
I want to make the section view, but later to transform the sectioned view to an isometry. is it possible?
AutoCAD Inventor :: Way To Save A Section View In Assembly As View Rep
Mar 13, 2013Is there a way to save a section view in the assembly as a view rep? Am using 2011.
View 9 Replies View RelatedAutoCAD Inventor :: View Label In Base View / Drawing?
Nov 25, 2008Each time when I place a part in base view, have to follow few steps; go through view label, format Text, than choose type option - [Properties-Model] and its property - [Part Number], than placing dimensions. it takes long time and very repetitive, especially, when placing a hundreds of parts and I was wondering if there is an option, to set up view label; [Properties - Model ]& [Part number], as a DEFAULT. So, each time placing a part, in base view it will come up with correct label. Also, overall dimensions, can it be retrieve using parameters of the part?
View 4 Replies View RelatedAutoCAD Inventor :: Diameter Dimension Out Of View From Detail View?
Dec 13, 2011I have a detail view of a groove on a cylinder. I want to dimension a diameter in which I only see one side, the other side is not in the detail view.
From some posts I see that I should auto insert a centerline then dimension from centerline then choose options "dimension linear".
First when I try to auto insert centerlines it does not insert the centerline for me. Perhaps because my detail is smaller. If I make the field for the detail view larger it makes a centerline, but I dont want to do that. I have tried making a sketch of the other side and the centerline. When I dimension from here I do not have the right click option of dimension linear, instead only arrowhead options.
Using Inventor Professional 2012
AutoCAD Inventor :: Cut Section / Different View Style In Same View?
Nov 12, 2013It's possible to do a cut view with the cup part with a different view style from the other "not Cut" half.
I achieve that, whit the cut view + normal view croped hover the cut view... but this isn´t a accurate process...
Autodesk Factory Design Suite Ultimate 2014
Autodesk Simulation Mechanical
Autodesk Simulation CFD
Windows 7
AutoCAD Inventor :: Section View As Master View
Aug 26, 2013I place the first view in a drawing and want to be sectioned.
Is there a way to do that, since when i mark the section line, another view is created.
Or should i put the main view outside of the paper boundaries?
AutoCAD Inventor :: Create Detail View Of ISO View?
Oct 3, 2013is it possible to create a detail view of an Iso view which is created with perspective camera? I tried it but it does not seem to let you have the option of selecting the connection line or detail view boundary?
View 5 Replies View RelatedAutoCAD Inventor :: Projected View From Crop View
Mar 24, 2011I have a Crop View of a IAM and want/need a Projected View of the Crop View. When I select the Crop View as my base and then select try to create a Projected View, I get the whole IAM.
I guess one could use the Section View and eliminate all the items I don't need for my Base View.
IV2014 sp1.2 PDSU / Sim Mech 2014 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 331.82
SpacePilot Pro 3.17.1, 6.17.7, 4.11
AutoCAD LT :: Snap Not Accurate Enough
Feb 2, 2012I've been drawing with Autocad for many years now, I've just upgraded to LT2012.
My problem is with the object snaps. They don't seem accurate enough. For e.g. I'll use end point to snap to a line or a corner and it will seem to work, but when I zoom in the object or the lines are not one on top of each other as they should be.
I'm doing drawings right now and the problem is just compounding as I continue. Nothing is perpendicular or parallel as they should be.
AutoCad 2D :: Accurate Selection Using Zoom?
Jul 8, 2013If I have a long column (100) of blocks on, say, 1" centers. I want to select block numbers 1 through 98 and copy them to another location. I enter CO, left click and hold to create a selection fence starting at the #1 end, then zoom in (using the wheel) to the last 4 blocks to accurately place the end of the fence between #98 & 99. I'm expecting to have selected #1 - 98 but find that I have only copied 97 and 98. Blocks that were no longer visible on the screen are not copied.
View 9 Replies View RelatedAutoCad :: Creating Accurate Border For Drawing
Mar 10, 2012I am trying to create a set of drawings to a standard and need to be able to create a border for them. I have tried creating a border in a layer, but it needs to be 5cm from the edge of the page.
View 1 Replies View RelatedAutoCAD Civil 3D :: Accurate Cut And Fill Reports
Feb 8, 2013Making my cut and fill reports more accurate?
The main question I have is when should I delete lines in my surface, so if there is literature on how to manipulate surfaces created from survey data that would be perfect.
AutoCad :: Polyline And Accurate Block Insertion?
Mar 5, 2012I have a polyline which consists of straight lines and curves in 2D enviroment.
I want to extract some coordinates. I usually use block refferences and "dataextraction" command. However, the problem is as follows:
I need to mark many things along the polyline's way at no constant intervals (not possible to "measure" it) If I have "osnap" on, I can't hit the spots I like for obvious reasons. If I have "osnap" off, I can't place the object accurately on polyline's way.
So, what I need is: how to allign multiple blocks to a said polyline. Allignment needs to be done as accurate as possible, prefferably perpendicularly to closest tangent of polyline.
AutoCAD Print / Plot :: Why Drawing Plots Results Using Viewport Scale In Layout Is Not Accurate?
Oct 8, 2013why the drawing plots results using the viewport scale in the layout is not accurate?
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: ANGTOS Return Accurate Result For Number If Decimal Places Requested
Jan 5, 2012I work with ANGTOS and ANGTOF quite a bit. I'm working with latitude and longitude conversions in MAP 3D for an application where accuracy is top priority. Most of the time ANGTOS (and RTOS, for that matter) return an accurate result for the number if decimal places requested, but then I run into a situation like this:
Command:
(angtos (angtof "120.0") 1 16)
"119d59'59.999999999949""
I got it to return properly by specifying only 13 decimal places, but the result makes conversion between coordinate systems inaccurate.
Photoshop :: Accurate 3D Lighting
Sep 26, 2012I'm having trouble getting my 3D lighting to look, well, believable in PS CS5 Ex. I've moved them around, tried different types of lights, and nothing seems to give me proper shadow contrast and glare and shine on my material. Here is a screen of a dining room setting I'm building (preliminary stage) by combining 2D and 3D elements.
The corner hutch on the right is the 3D piece and the two on the left are 2D. The walls, ceiling and floor are also all 3D as well.
InDesign :: How To Keep Accurate Color In PDF
Feb 20, 2014Mac OSX10.6.8 InDesign CS6.
I've created a design for a flowing graphic "wave" across an office window 20 ft wide. The only colour is Pantone #301 (blue), and there are gradients from 10% to 80%. The sign supplier wants a high res PDF to print on a flexible vinyl material. When I export to PDF, the colors change on my screen and go from blue to a grayish-blue tone.
1) If I don't do anything, but send the file, will the final output be close to what I see on my screen, or what the InDesign color palette specifies?
2) When I export to PDF, I see several options. I've tried several variations, and it does not bring the image closer to Pantone #301. What else can I do to assure I get the Pantone color?...
Here are the process and options:
- Pantone #301 is only color specified in InDesign.
- EXPORT to PDF.
- QUALITY - Press
- COMPATIBILITY - options from PDF 1.4 to 1.7. Which is the best to use?
- OUTPUT - COLOR -
Conversion to Destination? or Not?
Destination - many, many choices!
Profile Inclusion? Not sure what that does.
Ink Manager - It gives an option for "Spot to Process". Should I chose that?
Photoshop :: Layer Opacities Not Accurate?
May 12, 2012I use Photoshop CS5 12.1 for Mac.
When I set the opacity of a layer to, say, 50%, it will always go down one percent below, to 49% I'm not trying to be too picky here, but it's irritating when the opacity of the layer will always slide down one percent from what I set it as. So 68% becomes 67%, and so forth.
I have used Photoshop CS4 and and CS6 Beta and have never experienced this odd problem. When I set the exact opacity or fill, it will stay there. But with Photoshop CS5, it doesn't. I know it's not a huge problem, but like I said, it gets a bit annoying after a while, especially when I'm recording actions..