AutoCAD Inventor :: Get Accurate COG Short Of Creating RH Assembly Instead Of Deriving The Part
May 8, 2012
I have this assembly which includes a weldment and a derived / mirrored part where i need to identify the COG for lifting with a crane.
As you can see in the image (most components not visible), the COG is way off. The left half is the weldment, the right is the derived/mirrored part. Is there a way to get an accurate COG from Inventor 2010 short of creating a RH assembly instead of deriving the part?
View 6 Replies
ADVERTISEMENT
Mar 19, 2012
in v12 seem to say different ways of doing this. Which command do we use? We want to make a simple assembly into a new part, save that to disk, and insert that elsewhere into another assembly.
I assume this is easy to do...and the new derived part will update as the parts in the original assembly are updated also?
View 1 Replies
View Related
Nov 20, 2011
I am designing a component whose internal mechanism is housed in a plastic shell. I want to use the boss feature in the shell so I can hold together the components internally, but the boss feature is only available in the part workspace, but in order for me to know where the internal components are so I can design my shell accurately, I have to be in the assembly workspace.
Now, if I opened the shell as a part alone, and imported (through the Derive command) the parts that need to be fit into the shell, they will appear at random positions, and because you cannot create constraints in the Part Workspace, I have no effective way of holding them where they should go.
View 2 Replies
View Related
Sep 20, 2012
I was trying to create a design template in the Multibody Part environment (MBP) for design cases we use almost every day.We´re relying heavily on semi-finished products (plant construction), so 80% to 90% of our parts are plates, beams, pipes and similar. In most cases we create a welding assembly which has only the semifinished parts which are welded together.
What I expected from the MBP was to be able to preconfigure properties like materials and width, length and height before I create parts which then are placed into the assembly.
Now this doesn't work. So I have created some iLogic code that finds the base dimensions of plates (thickness, length, width) and adds this information to the custom properties so it shows up in the BOM.
This works with a template which I have added to this thread. Now what you do is choose this template for the solid bodies which are plates when you derive your parts after you have finished setting up your MBP.
In the template I have embedded an excel sheet, that searches for a numeric thickness value (discrete) in the "thickness" column.After finding the according entry in the excel sheet it will read out the item number from that column and writes it back into the custom properties.
We're using a PDM system the files get uploaded to and if the PDM system finds a known item number it will automatically connect the documents to the correct item master.
Right now this works only with one material for every template. Additionally I want to be able to get a prompt before the part get's saved, that asks me to define a material based on the data of my style library. How to do that with iLogic code pieces?I will work on this further and will update the thread with new functionality.
View 5 Replies
View Related
Jun 19, 2012
I am facing problem in creating part in top down assly.
Find attachment.
I first part as pipe having dim 300 mm.In assly I select create option and made sketch having diameter 100 circle . I have extrude this circle up to the wall of 1 st component . I select to option but surface of 1 st component not getting selected. If I select 1 st part rectangular shape, that case 2 part extrude using same concept. (# ref 2 attachment)
View 8 Replies
View Related
Feb 15, 2013
My issue is we have Universal assemblies that never change. These assemblies are thousands of parts. (hardware gaskets other random assemblies.) this top level universal assembly never changes.
to increase time in layouts. we would like to create these universal assemblies into 1 sold part.
Is there a was to export an assembly into a single solid part.
View 1 Replies
View Related
Apr 9, 2010
AutoCAD Inventor Suite 2010
64-Bit Edition - Build 260 - SP2
Intel Core 2 Duo - E8400 @ 3.00GHz
8 GB - Ram
64-Bit - Windows 7
why my Inventor Keeps crashing when I am inserting a Parts List into a Drawing for my assembly.
It has been happening more frequently now, and I already installed Service Pack 2. The above is my computer information.
View 5 Replies
View Related
Apr 24, 2013
I have created a parametric, multibody master part file to derive parts from it, and then put them in an assembly. See attached file. Now, I need 3 different versions of this setup (with different values of the parameter 'bending_angle').
What is the best way to do it? If I derive parts from it, they always follow the *actual* status of their master file. Is there some method to do this: "derive from this file, with parameter bending_angle=55deg", but keep the dependency relation, i.e. if I modify something on the master file, the derived part fill follow the modifications (with the value of bending_angle=55deg)
Inventor 2013
View 3 Replies
View Related
Mar 28, 2012
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies
View Related
Apr 1, 2013
I`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
View 5 Replies
View Related
Dec 11, 2013
I would like to simplify this assembly into one seamless part for FEM calculation:The assembly consists out of parts that, in reality, will be welded together. Due to their form, there is no way to place them exactly onto each other, therefore there are slight gaps between the parts:
Now when I try to merge the assembly into one part via "simplify" --> "create simplified part" and choose "single solid body with seams between planar faces merged", Inventor does not fill these gaps (even though it displays only one part in the bottom right corner of my window). Unfortunately, the remaining gaps brings "contact" problems in the FEM simulation.
how to close the gaps and really merge the assembly into one part?
View 6 Replies
View Related
Nov 15, 2013
New user 2014
Part created in assembly does not update to part file.
View 9 Replies
View Related
Mar 29, 2012
I have a part that has protrusions. When i mate that part up to another part that second part needs to have cutouts/holes to receive those protrusions.
i mainly use it in sheetmetal parts. and use the rectangular protrusions on de contour to mate up with corresponding cutouts in the other sheet. this works with positioning and also makes for a nice weld spot/area.
But also for making holes to accommodate a mold pin used in custom punch dies. I want the intervening part to receive a corresponding (propperly tolleranced) hole automatically. Much like a bolted connection does.
same for parts like circlips. i want them to automatically generate the seat in the part it's mated to. Rather than using the axle generator.
Ofcourse one can place the parts and do an in assembly interpart projection and go from there, but i want the part to generate the (predifined) modification to the other part. It would save time and also reduces problems as the parts are moved about or even removed.
View 7 Replies
View Related
Jul 1, 2013
I have an assembly with 10 parts in it. We use many assembly features at the assembly level (Revolve cut, Extrusion cut..etc). How to find the mass difference of each part by comparing at its parts level and its assembly level.
View 1 Replies
View Related
Oct 3, 2013
I have a two part duct fire damper assembly. The IDW has the combined two part assembly, which I know how to turn the CoG on, so that it can be dimensioned. The problem is each piece will more than likely be hoisted separately so I would like to show the CoG for each piece, not the combined master assy.is there a way to do this?
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
View 5 Replies
View Related
Jul 10, 2012
I'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies
View Related
Aug 20, 2013
If I want to find part which is inside another part or assembly, which means no matter how I turn camera, I always cannot see that part.
Does inventor has this function? Or is it possible to develope by .NET API?
View 4 Replies
View Related
Feb 7, 2013
I can't seem to find how to use the Inventor 2012 API to project an entire sketch profile from one .ipt to another .ipt file from within an .iam file.
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
View 2 Replies
View Related
Dec 3, 2013
Why when I mirror a part in an assembly the mirrored part gets a new part number? I want to mirror only the position of the part which is always the same part. Is it possible to do that in Inventor?
View 7 Replies
View Related
Oct 7, 2011
I have a part that is designed to be made from a casting. In my workflow it makes more sense to create the as machined part first and then base the casting on the machined part usually by using save as and then deleting the machined features. I understand that you can easily go the opposite direction by creating the cast and then creating a derived part that you apply the machining features to.
I tried to derive the casting in this way hoping that you could just suppress of delete features without altering the associativity between the two files but it appears that the derived part doesn't "know" about the features on the original, it's just a solid.
It would seem that this workflow would be a no brainer since most of the time the casting depends on the finished part which depends on the design specifications, so am I missing something or is there really no way to do what I want to do without having to go the messy route of having to manually alter two separate parts every time I alter the design?
View 7 Replies
View Related
Mar 10, 2012
I am trying to create a set of drawings to a standard and need to be able to create a border for them. I have tried creating a border in a layer, but it needs to be 5cm from the edge of the page.
View 1 Replies
View Related
Oct 7, 2013
Deriving components is a good thing. Unfortunately, there is no way (at least that I know of) to derive the material fields from the source object. It's a little more complex when deriving sheet metal objects. In that situation, you not only cannot derive the material, but you also cannot derive the sheet metal styles; but you can the thickness.
Either something I am missing through the "derive component" command, or an iLogic rule that would work?
View 3 Replies
View Related
May 8, 2013
I am in Inventor customization using VB.net as development language.
There is one issue which is troubling me from some time.
Is it possible to identify the name of parent assembly of part/sub-assembly.
For Instance there is a Sub-Assembly/Part, how can i identify the parent assembly using VB.net without opening that assembly.
View 7 Replies
View Related
Oct 1, 2013
I have an assembly of stair made from steel. There are lots of part the same. Is there a way to make a hole (inside assembly) to one and that hole would appear on all of them.
And another problem, how can I made cut (inside assembly) through more then one part so that would affect a part also when I open it alone.
View 9 Replies
View Related
Oct 6, 2012
I am capturing a book-case design that I made long ago into Intentor. I am almost finished, and I want to produce .dwg files and a bill of materials of parts that can be held.
For various reasons, almost all the items in the existing design are assemblies, and the underlying parts correspond more or less to half of physical parts that are contained inside a repeating cell. I will almost certainly continue using this approach.
A simplified design that shows this is at [URL]..... in the file Display.iam
I created the file Slat.ipt by using derive (Slat.iam).
If I replace the Slat assemblies with the file Slat.ipt, the bill of materials will show parts that correspond to physical parts that I can hold in my hand, or list on an invoice. I can do this with many, many mouse operations.
To make this modification quickly, I attempted to do Component -> replace on the Slat assembly. I use this operation a lot to replace one version of an assembly with another. When I do it with a .ipt file, the system pauses for some tens of seconds, then crashes.
A brute force work around is to use the mouse to do the replacement, essentially rebuilding the entire project in place.
View 1 Replies
View Related
Sep 27, 2013
When i create a part in an assembly, i select a plane or face with the cursor, but then i select again a plane for the sketch.
Why this double selection, and what does the first selection do, if the part is actually sketched on the plane i selected in the second time.
View 8 Replies
View Related
May 28, 2013
Normally you start with new models/assemblies/and drawings when you use the templates the naming by default is part1.ipt, assembly1.iam, drawing1.idw
I am currently at part431.ipt and assemby57.iam
I am concerned I may eventually reach part1000.ipt LOL
Currently using Inventor2012.
View 6 Replies
View Related
Aug 1, 2013
as you can see from the image, the blue cone isnt transparent. i set the material properties to "clear blue" to make it "see through", i want to show whats under the cone. however the cone isnt transparent. how can i get the cone to be transparent? is there a step im missing?
View 7 Replies
View Related
Nov 25, 2013
I've created a BOM of parts from a large assembly and it has an item just listed as pt.1.
View 9 Replies
View Related
Sep 14, 2012
I have a part that is inserted in an assembly. If I change the color of certain portions of the part it isn't reflected in the assembly.
View 5 Replies
View Related
Mar 26, 2012
I have written a program where i will copy inventor assembly tree to custom form in tree format. Now my problem is whenever i click a part in tree i must edit the part. I am trying to access the Fx parameter/IAssembly to use it but not getting desired results .
View 8 Replies
View Related