AutoCAD Inventor :: Setup Sliding / No Separation Contact Within And Assembly For FEA
Mar 21, 2012
I'm trying to set up a sliding/no separation contact within and assembly for FEA purposes. I want to eliminate all moments (torque) between two pieces while still allowing one to impart force on another. When evaluating constraints, I'm seeing moments are infect being passed through. The guide mentions this contact for planer and cylindrical objects but makes no reference to spherical surfaces.
Is it possible to accomplish this type of a contact on spherical surfaces?
View 2 Replies
ADVERTISEMENT
Mar 28, 2012
Look at the attached snips. The assembly icon is strange to me. and I can not
set it as a contact set because it is greyed out. Is there any way to set this as a contact set?
Inventor 2012
View 2 Replies
View Related
Nov 4, 2013
Is there a way to set up the BOM in the assembly file to show the top assembly as a line item with all it's children (and their children) listed underneath?
View 9 Replies
View Related
Mar 21, 2013
When we use the Productivity/Add Assembly functionality, it produce a Weldment Assembly instead of a Standard Assembly.
How do we change the setup to use a Standard Assembly?
View 1 Replies
View Related
Jun 7, 2013
In our drawing office we use Inventor in a mining materials handling environment. Our output is mainly structural drawings where we require a bill of materials as part of creating a drawing. Whenever I insert a BOM in the drawing environment I get this table which is labeled in a foreign language (it looks like an Eastern European language) and the format is not as per the standard Autodesk installation setup.
How do I either revert back to the standard setup or do a BOM setup from scratch?
We use IV 2013 Professional on Windows 7 64 bit.
View 1 Replies
View Related
Jan 4, 2013
I'm trying to apply the right constraint in stress analysis environment.
How would I apply the right constraint? And to which face of the wheel or axle should I apply the constraint to get right results.
If I'm applying the sliding connection to the face of the wheel in z direction, the model will stop stress analysis with an error of "not enough constraints"
if I apply the sliding constraint to the inside of the wheel on the surface of the circle, I get the result as attached. I get 0 reaction in the Z direction which is wrong and should be zero reaction in x direction. How do I get it right?
The correct way to me would be a constraint that would only take forces in the -Y direction, same direction as gravity.
The wheel should not have any other reaction than in the Y direction. Hoe do I define that constraint? In my model the wheel are free to rotate on the axle.
I'm attaching both the general arrangement and the reaction report.
View 2 Replies
View Related
Jul 24, 2013
I have an issue with a sliding joint in a simulation.Here we have a very simple box with a cylinder that slides around a closed loop curve. The curve as you will see is described by two circles and one elipse that all overlap to give a smooth closed loop. In the assemble this all works fine - you can freely drag the cylinder around the curve. However in dynamic simulation when I try to insert a 'sliding cyclinder on curve' joint I get the message that only lines, arcs and splines can be used for a curve. If I change the elipse to another circle then I don't have this problem. So is Inventor restricted to arcs of circles rather than arcs of elipses? Is there a way around this?, Do have I have to draw the whole curve as a spline?
View 4 Replies
View Related
Feb 11, 2013
I've got a chain that runs between two sprockets. In between the sprockets is a slider that needs to be attached to the chain so that the rolling of the chain moves the slider back and forth.Right now the chain just runs straight through the slider, it isn't connected at all. I can't find any way to tell Inventor that this slider is connected to the chain.
View 2 Replies
View Related
Jan 7, 2014
Why is a part in an assembly not enabled for contact set? on right click the Contact Set option is grayed out, but that part was in contact set for another part already. i made some changes in the part, maybe that's the reason, is it?
View 3 Replies
View Related
Mar 20, 2012
Attached is a screen snipe of design that has a hydraulic cylinder in it. I've created contact sets for the rod and the cylinder however they keep breaking appart especially when I insert them into an assembly and drive to drive the constraints in a positional representation.
View 9 Replies
View Related
Oct 25, 2012
i drew a cylindrical cam using the inventor tool then i also drew the actuator ( a simply plate rounded on top) but when i add the contact tangency link between the two surfaces and i move the cam , the two objects interpenetrate!
i'm using inventor professional 2012
View 5 Replies
View Related
Feb 12, 2013
I'm working on a FEA of a climbing carabiner (oval-shaped; one side of the oval is a gate which opens and closes allowing a rope into the carabiner).
The gate of the 'biner has a hook which attaches to the "nose" of mainbody/biner. However, this hook does not engage until the biner slightly deforms.
I've attempted to use the separation/no sliding contact option, but the solver behaves as if there is no contact occuring. The nose simply passes right through the gate hook.
The initial gap of the system is about 0.040". That means the nose must deflect 0.040" before the contact surface comes into play.
View 3 Replies
View Related
Apr 3, 2013
I am using Invertor Dynamic Simulation and I need to know the 2D contact position data to be displayed in the output grapher (i.e. the x,y,z coordinates). Only the forces are computed in the output grapher. I’ve tried using the “trace” feature but this will not allow me trace the 2D contact point. It would even benefit me to know the angle of the normal force relative to the absolute frame.
View 2 Replies
View Related
Jun 6, 2012
I am using INV 2012 and I wan to to know a trick how to convert the weldment assembly back to regular assembly template.
View 1 Replies
View Related
Jul 10, 2012
I'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies
View Related
Sep 18, 2012
We have an iLogic assembly with to parts in it. Maybe to cylindrical parts. The iLogic rules should do the following.
1. Start a Rule after open document.
2. This Rule starts a Rule in the first cylindrical component.
3. This Rule ask the user for a diameter.
4. The assembly gives this new parameter value to the second component
5. Then the assembly calls another rule in the second component to change it with the new parameter
Everything is working fine when the following combinations are taking place:
1. I open up the assembly out of vault or from a local drive or an accessible server drive
2. I insert the assembly as sub assembly in another assembly from a local drive or an accessible server drive
It don't work with the following situation:
- I insert the assembly as sub assembly in another assembly out of vault
Then the user becomes the dialog "Choose a diameter" twice.
I don't know why, but I have the idea it has something to do with the functionality of inventor to insert a component more than once. If you insert a component in an assembly Inventor gives you the opportunity to add more than one occurence after each other.
change that behaviour? Maybe a switch to change that inventor "add more than one occurence" behaviour.
View 1 Replies
View Related
Feb 9, 2012
I have encountered a problem with the Tube and Pipe styles.
As you can see, I have a rack assembly with a custom tube and pipe style. A wire as a tube in orange, and a tube support in white. Both have their seperate colorations at a style in the tube and pipe styles editor
When placing the rack assembly into the main assembly, it reverts to the coppor coloration I changed from the original style.
Steps I've taken:
Exported the styles .xml and Imported the styles into the master tubeandpipe.iam
Imported the user created .xml styles into the main assembly file nothing seems to work
View 8 Replies
View Related
Apr 23, 2012
I am trying to find the interior volume of an assembly (when am I not?!?!) by subtracting the assembly from a block that surrounds the most of it. Somewhere the assembly has a "leak" and I have been trying to use the Cross Section Analysis to track down where the inside lump is connected to the outside lump to be subtracted. Is there a less time consuming way to dynamically drag a plane across and get cross sectional views?
Even better is there a simple way to animate the analysis plane moving across the block so I can hopefully just watch and pause it when I find a leak?
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
View 2 Replies
View Related
Oct 30, 2012
it is possible to make a constraint that utilized a parameter of a part within the assembly.
For example, if I wanted to use the thickness of a plate, which I defined in the part, could I call that parameter in a constraint?
View 1 Replies
View Related
Oct 31, 2011
My assembly has grown (about 50 parts) to where I need to consolodate some parts into subassemblies for reuse and alternate iterations of the basic design.
When I import the original parts into a new assembly, all of the constrains I created are not there of course.
I've tried creating a new empty part and then deriving a new part from the assembly, but I can't add, delete or edit any parts.
I looked at using Shrinkwrap, Substitutes, iParts, Multi-body Parts, and Multiple Solids but I remain confused.
In retrospect, maybe I should have created the subassemblies between the part and assembly stage but I didn't.
View 4 Replies
View Related
Aug 10, 2013
I am trying to constrain motion for the following design:
-Object constrained to vertical motion (a counterweight).
-Object constrained to horizontal motion along a track (a slider).
A cable runs from the counterweight upward, makes a 180-degree turn around a pulley, runs back down, makes a 90-degree turn around another pulley, and connects to the slider.
When the weight moves down 10 cm, the slider needs to move laterally 10 cm.I don't care about modelling the cable, but I do need to have the slider move as the weight moves.
I will also need to model a case with a more complicated pulley, where when the weight moves down 10cm the slider moves laterally 5cm (again I don't care about the cable, just the relative motion).
Is there a way I can do this without creating a series of planes and cylinders and using rotation - translation constraints to link the motion of the weight to the slider?
View 9 Replies
View Related
Dec 2, 2011
I set the two v blocks were fixed and bonded contact type among three of them. The program said it was divided to three separated parts but i wouldn't expected that.
View 1 Replies
View Related
May 24, 2013
Can an adaptive part (non involved in the drive constraint animation) bother the contact solver?
I have an assembly, with only one adaptive part, i have activate contact set for other 3 parts (not the adaptive part), activated contact solver and drive the constraints, but in the animation contact solver doesn't work at all.
So, i have tried to move manually the assembly (suppressing angular drive constraint) and the contact solver works fine.If i suppress the adaptive part the driving constraint and contact solver work perfect.
So i wonder... adaptive part can annoying the contact solver functionality?
View 5 Replies
View Related
Nov 9, 2011
I want to be able to control the location/position of a component in an assembly. This is easy enough through the iProperties/Occurrence tab and then adjust the location of the X,Y, and Z offsets. Is this possible using iLogic? I have been unable to find a function to access via iLogic. Ultimately I am trying to translate a component about an axis not a pattern.
View 1 Replies
View Related
Sep 3, 2009
I would like to find a function that returns the two objects colliding using contact sets. I'm not sure this functionality is available in the API.
View 1 Replies
View Related
Jan 28, 2013
I'm trying to run a simulation of 2 bevel gears without using the transitional/rotation constraint, but using the contact between the surfaces to simulate the rotation of the gears - basically I have an L-shaped shaft running through both centers and want to have the upper gear grounded, make the lateral gear rotate around its own axis - the goal is simply to see the contact between the gears make the side gear rotate around the vertical part of the l-shaped shaft, due to the contact forces.
View 2 Replies
View Related
Nov 28, 2011
Can I select a bunch of parts in an assembly and say "save these pieces as a new assembly"?
It is just such a needed tool but I cant find an easy way to accomplish this.
View 2 Replies
View Related
Oct 3, 2013
I have a two part duct fire damper assembly. The IDW has the combined two part assembly, which I know how to turn the CoG on, so that it can be dimensioned. The problem is each piece will more than likely be hoisted separately so I would like to show the CoG for each piece, not the combined master assy.is there a way to do this?
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
View 5 Replies
View Related
Sep 3, 2013
I would like to see if there is a routine that allows my iLogic code to detect if my assembly contains another assembly within it. If my assebly contains assemblies then I don't want "MyRule" to run. Else if it does then I want "MyRule" to run.
View 4 Replies
View Related
Mar 21, 2013
My Assembly has two possible positions for my piston.
I would like to show both piston positions (top and bottom) in one drawing file; however, in different drawing views.
I have tried using LOD and Drawing View Representations, but it is my understanding that neither of these are meant to be used in this way.
View 2 Replies
View Related
May 29, 2012
Working on gas transmission classification using the "sliding mile" for the building count? If so what procedure are you using. At this point I have run the 660' buffer around the lines added the address/structure point queried to within the buffer polygon then select all the points along a mile of point to get a count.
View 2 Replies
View Related
