Attached is a screen snipe of design that has a hydraulic cylinder in it. I've created contact sets for the rod and the cylinder however they keep breaking appart especially when I insert them into an assembly and drive to drive the constraints in a positional representation.
View 9 RepliesI would like to find a function that returns the two objects colliding using contact sets. I'm not sure this functionality is available in the API.
View 1 Replies View RelatedIs there a way to break dimensions in Inventor like in Autocad? It automatically breaks around certain things, but I'm wondering if there is any way to control this.
View 7 Replies View RelatedSay we needed a similar assembly under the same file with a few modifications, like a guardrail for instance. All I have ever had to do was copy the folder with the assembly and parts in it and rename the folder and assembly to change the link to another folder. Opening the assembly quickly prompts me for a part or two in the new folder then I am good to go. A coworker of mine who runs the same computer and version of Inventor never gets that request. When the assembly is opened in the new folder it automatically links it back to the previous file regardless of changing the folder etc.
Inventor 2011
OS Windows 7
8GB
Inventor 2011
Intel Core 2 Duo 2.93GHz
8GB RAM
Windows 7 Pro
I have several assemblies where I've linked parameters between sketches. I need to copy some of these files for re-use in other un-related assemblies. What is the best way to break the link between the files? They are going to be used in the same project.
View 8 Replies View RelatedI am wondering about something called a "dimbreak" command to break demension lines. I heard it has been used in AutoCad. Is it also something available to Inventor users? I can't find anything when I search for it in Inventor and I need to be able to "explode" or otherwise change my dimensions manually so I can break dimension lines as they pass over other dimension lines.
View 2 Replies View RelatedWhen attempting to break the link on a projected spline, the spline type reverts to what appears to be the legacy AutoCAD type of spline (see image).
Is there a way around this other than drawing a new spline on top of the projected geometry and working with the new spline?
The idea was to project the shape, break the link, then ,ove the shape to a new location in preparation for a lofting procedure.
We are having a pretty large annoyance where anytime you open a part with a decal, a message comes up saying there is a newer decal, and asking if you want to check out the decal. From digging a little bit I have found that this is caused by the decal being linked to the image. I however have not been able to find a way to break the link on an already created and vaulted part.
If so, how is this link removed?
I have made an assemly using some items from content center. I want edit the item and would like to break the link between content center ?
Inventor Professional Suite 2010
Windows 7
I am using 2011 version of inventor.
In drafting while creating note of hole there is no breaking point for arrow there is only straight arrow line( pls find attached file of DIM 01). I am not getting any setting for the same.
I want notation having breaking point. ( Ref attachment Dim -2)
When I create a "Break" in a view, Inventor glitches. The other views, and even the border, title block, and whatever else is in the drawing, will disappear. The other items reappear if I "Zoom All". Is there an update?
View 1 Replies View RelatedLook at the attached snips. The assembly icon is strange to me. and I can not
set it as a contact set because it is greyed out. Is there any way to set this as a contact set?
Inventor 2012
Why is a part in an assembly not enabled for contact set? on right click the Contact Set option is grayed out, but that part was in contact set for another part already. i made some changes in the part, maybe that's the reason, is it?
View 3 Replies View Relatedi drew a cylindrical cam using the inventor tool then i also drew the actuator ( a simply plate rounded on top) but when i add the contact tangency link between the two surfaces and i move the cam , the two objects interpenetrate!
i'm using inventor professional 2012
I'm working on a FEA of a climbing carabiner (oval-shaped; one side of the oval is a gate which opens and closes allowing a rope into the carabiner).
The gate of the 'biner has a hook which attaches to the "nose" of mainbody/biner. However, this hook does not engage until the biner slightly deforms.
I've attempted to use the separation/no sliding contact option, but the solver behaves as if there is no contact occuring. The nose simply passes right through the gate hook.
The initial gap of the system is about 0.040". That means the nose must deflect 0.040" before the contact surface comes into play.
I am using Invertor Dynamic Simulation and I need to know the 2D contact position data to be displayed in the output grapher (i.e. the x,y,z coordinates). Only the forces are computed in the output grapher. I’ve tried using the “trace” feature but this will not allow me trace the 2D contact point. It would even benefit me to know the angle of the normal force relative to the absolute frame.
View 2 Replies View RelatedI am trying to constrain motion for the following design:
-Object constrained to vertical motion (a counterweight).
-Object constrained to horizontal motion along a track (a slider).
A cable runs from the counterweight upward, makes a 180-degree turn around a pulley, runs back down, makes a 90-degree turn around another pulley, and connects to the slider.
When the weight moves down 10 cm, the slider needs to move laterally 10 cm.I don't care about modelling the cable, but I do need to have the slider move as the weight moves.
I will also need to model a case with a more complicated pulley, where when the weight moves down 10cm the slider moves laterally 5cm (again I don't care about the cable, just the relative motion).
Is there a way I can do this without creating a series of planes and cylinders and using rotation - translation constraints to link the motion of the weight to the slider?
I set the two v blocks were fixed and bonded contact type among three of them. The program said it was divided to three separated parts but i wouldn't expected that.
View 1 Replies View RelatedI'm trying to set up a sliding/no separation contact within and assembly for FEA purposes. I want to eliminate all moments (torque) between two pieces while still allowing one to impart force on another. When evaluating constraints, I'm seeing moments are infect being passed through. The guide mentions this contact for planer and cylindrical objects but makes no reference to spherical surfaces.
Is it possible to accomplish this type of a contact on spherical surfaces?
Can an adaptive part (non involved in the drive constraint animation) bother the contact solver?
I have an assembly, with only one adaptive part, i have activate contact set for other 3 parts (not the adaptive part), activated contact solver and drive the constraints, but in the animation contact solver doesn't work at all.
So, i have tried to move manually the assembly (suppressing angular drive constraint) and the contact solver works fine.If i suppress the adaptive part the driving constraint and contact solver work perfect.
So i wonder... adaptive part can annoying the contact solver functionality?
I'm trying to run a simulation of 2 bevel gears without using the transitional/rotation constraint, but using the contact between the surfaces to simulate the rotation of the gears - basically I have an L-shaped shaft running through both centers and want to have the upper gear grounded, make the lateral gear rotate around its own axis - the goal is simply to see the contact between the gears make the side gear rotate around the vertical part of the l-shaped shaft, due to the contact forces.
View 2 Replies View RelatedWhat it is, my client has asked me create 4 different size transit frames all similar in design. Now I use the skeletal modelling technique to create all my models and this one is very easy to edit, all I have to do is change a couple of sketch dimensions and the transit frame assembly will update to suit any given size.
So, I have completed the drawings set for the first one (There is about 7 drawings in total, each containing about 5 sheets), and I would like to just copy the whole assembly and drawing set for the next frame, and I would just change the dims in the main sketch to suit the new size of transit frame that is required, BUT I dont want to alter the original frame.
Usually to do this, I would create a pack n go then open up that pack n go project in design assistant and change all the names of all the files, then place all these files into another project.
Now doing this is VERY time consuming, as if I am renaming all the files, then I am going through around 1000 files to do so!!!Even after I do all this I still run into some problems with assemblies looking for part files or idw's still picking up and showing the old project assemblies.
Is there an easier, more efficient way of doing this?Also, I would like to add that each of the 4 transit frames would have their own project BUT all 4 projects will be inside 1 parent folder within the vault. This is just the way that we structure or file system as each folder is for the entire job.
I have created an assembly that has a parts list, and in this parts list I have up to 100 mono detail drawings. I would like to know if there is a way to print all of these drawing from that list in a massive plot.
At my previous company we had something like this in AutoCAD where a script was created to look at the drawings and print all drawings mentioned in the assembly BOM and subsequent sub-assemblies, it worked beautifully.
I find that I have to print all drawings to paper or PDF individually.
I'm detailing a simple square plate with a good number of holes in it. I create an ordiate set running vertically along the LH edge and select the holes that are close to that side. Origin is the lower LH corner. Works great, easy.
The holes that are closer to the RH side though I'd like to show on that side. So I go to create a second ordinate set for the RH side and choose the lower RH corner as the origin and choose my holes that are close to that edge. The 2nd set will automatically show a second "0.000" dimension on the bottom edge and I can't supress it by right clicking.
Is there a better way to do this? What I've done now is to not use a set but just choose ordinate dimension and go from the opposite edge, which works.... But alignment is better with a set.
What are the rules for how elements (specifically, collections and other collection sets) are ordered within a collection set?
I was trying to get a collection to appear at the top of the list of items in a collection set, but it seems to get stuffed below all the other collection sets regardless of the name given to the collection.
I'm using Inventor 2011 and I can't figure out how to set my dimension settings so it breaks the dimension extension lines automatically when crossing over other dimension extension lines. I saw that others say it just happens, but it is not "just happening" for me. how to set my dimensions so when dimension lines cross each other one of them automatically breaks?
View 9 Replies View RelatedIs there any way to split a pipe (in a non-pressure network) in two?
View 2 Replies View Relatedhow i can break multiple lines where they intersect, I have done research on Qbrick but cant seem to download one that works
View 1 Replies View RelatedIs there a way I can break multiple ojects at once? For example, I have a row of consecutive circles (shrubs on a landscape plan) that overlap. I would like to elminate just the overlapping portions.
View 2 Replies View RelatedI'm the only one out of a bunch of guys using 2012. Others in my office are using either 2010 or 2009. They can set up Excel tables with links and have no troubles but, the minute I try to edit one the link gets broken. I also have an issue where if I highlight the border of the OLE, right click, and try to open the OLE... I get a small error box saying that the server application has failed.
View 3 Replies View RelatedHow do you break multiple lines along a line?
I.e. you have ten horizontal lines 3m long and one vertical line running down the center of the 3m lines. I need to break the horizontal lines in two where they touch the vertical line without having a line smaller then 1.5m.
On a single line I can do it using the F command and clicking twice on the intersection but is it possible to select multiple lines ant the same time and use the crossing line to cut along?