AutoCAD Inventor :: Linking Parameters Between 3 Or More Files?
Oct 13, 2011
Is there an easy way to remember how to correctly link parameters between 3 or more files? It seems like such a confusing way to do such a simple task. I am going into the parameters of each file and linking or deriving other file properties. Currently I don't have a dummy part file that controls all of the parameters. Maybe that's part of it. I've never done this using excel. Would this be any easier? I am just frustrated with the way I know how and wish there was an easier way to go about it. I keep getting the cyclic dependency warning and somewhat understand what this means, how why it's happening (or how to correct it).
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
View 9 Replies
ADVERTISEMENT
Nov 6, 2013
So i have a box with a left side, right side, top, bottom and a door in an assembly.I've linked all the parameters to the 'right side component' so that when i change it, it updates all the other parts in the assembly.
What I want to accomplish is to be able to use my BASE SIZED BOX ( say 500 x 500 ) to create many different sized boxes.The problem I have is when I save the assembly as a new one and save and replace all the components for the bigger box, all the components still reference the old part ( 500 x 500 right side component) instead of the bigger ( 600 x 600 right side component.
how to link parameters, don't know ilogic, and just know the basics of assemblies and part modeling.
View 9 Replies
View Related
Jul 15, 2012
I want to link the thickness of the material used for a steel structure of to the offset of another steel structure that attaches to that it. I want to be able to change the size and material used for the frame and not have to continually change the offset of the piece attached to it. Is there a way to lind the thickness of one bar to the offset of another?
View 6 Replies
View Related
Sep 21, 2011
Im wondering if its possible to link either a constraint dimension to an action parameter or vice versa. Or using a linear parameter's value in an user parameter formula.
Its a 2D cylinder, for winding purposes we just have a rectangle, with a distance from the Y axis for radial.
Parametric dimensions: B=thickness, C=Lenght, R=radius
User parameter: A=Diameter (R*2), Mass in kg ((((pi*(c*b))*(A+B))*1.25)/1000)/1000
For the BOM, i need A, B, C & mass
For drawing references for peoples on the floor, to distinquish a cylinder from a stick, we put lines at the top and bottom of the cylinder, 1mm distance inbetween them.
I figured that making a linear parameter + stretch on the thickness to replace the B parametric dimension, allowed me to make an array of that line, with increments of 1mm as i stretch the cylinder. The thing is that the mass formula cant take the value of action parameters....
Other alternative is to keep the B parametric dimension, and add a linear parameter as above for the array. But then i have 2 places to adjust, and from a test i made, if i change the R dimension, the linear one does not follow. Its very frustrating.
What i was hoping autocad would be able to do is distance1 for array to be same as B dimension, but it does not allow me to do that, unless im missing something.
View 0 Replies
View Related
Nov 5, 2012
I have an assembly drawing made with 2 parts in it. I have the assembly drawing as Sheet 1 and each part also in the file as Sheet 2 and Sheet 3. What I have a problem with is that when I change or update the original files for Sheets 2 and 3 it doesn't update the sheets in the assembly drawing. Is there a way to keep these files connected. I need to have the standard sheets for filing and part designation, but when production call for the assembly to be needed, the assembly (Sheet1) with the Attached part drawings (Sheets 2 & 3) hit the production floor. Without them linked a mistake will be made. There are to many engineers in my department and we all make production changes to parts and if they are not linked bad things will happen. I am just trying this out, we have a lot of assemblies that will be great for the production if I can get all the part and assembly files to work together and print at the same time from on file.
I am using Inventor 2012 if that matters.
View 7 Replies
View Related
Aug 17, 2012
I’m looking to do a drawing of a content center file that has a table associated with it. I’m looking to do a table much like the general table option that pulls in parameters of a std. part. I understand that content center files have no intelligence to thread data but If there is no easy way of doing that I may need to pull in an excel sheet that has the data I need.
Ultimately I would like a table that has the part #, “Dim A”, “Dim B”, etc. that links to text dimensions on the content center part view in the drawing.
The reason I want it to be a content center file is that I have a couple hundred parts that only differ by one or two dimensions and don't want to have to go through that many drawings to update and make changes to.
I am using Inventor 2012 Pro
View 4 Replies
View Related
Mar 3, 2012
I am linking a model to an excel spreadsheet. Normally you would specify what cell on the first sheet (Sheet1) to start in. I have been told that you can link to other sheets in the workbook as well. Is this possible? I have tried, but have not been successful. If it is possible, how is it done?
View 6 Replies
View Related
Mar 14, 2012
Are there any known methods (work-arounds or otherwise) for linking cad files in families?
View 1 Replies
View Related
Jun 5, 2013
I have just converted to Illustrator CS6 Creative Cloud and can't get placed JPG files in Illustrator to link to Photoshop? Only PSD files will open Photoshop when I click on "Edit Original".
View 3 Replies
View Related
Oct 1, 2012
Basically what I am trying to do is link the length of a flange on one part to a different part. Am I able to take the dimension from another part and say I want this flange to be a certain length plus the seperate part dimension?
View 5 Replies
View Related
Jan 30, 2009
I have a user that wants to be able to either link dimensions to other dimensions, such as a ref dim to a live dimension or while inserting text in a note on the drawing to be able to list a dimension within that text string to a dimension of the part so as the part updates, the dimension in the text sting updates.
View 9 Replies
View Related
Mar 2, 2012
I prefer using the proxy workflow for fullhd editing because it allows fast timeline scrolling. My video rushes are all on external disks. Creating a project and proxies is no problem (takes some time). The problem however is, when I re-open VS with a project for which I created the proxies before, while the related external disk is not active (removed), I still get the tumbnails in the VS library, but I lose the proxies even after the external disk is being restarted. The strange thing is that the proxies (.upx files) are still in my proxy folder (local disk) when opened in Windows, but the VS proxy file manager doesn't see them anymore. Is this normal?
View 2 Replies
View Related
Jun 15, 2012
Wondering if it was possible to have a .idw drawing automatically update all its copies with any annotation changes. They would all be linked to the same model and would update if the model was altered, but I need only one master drawing whose annotations can be altered. The copies would be read-only, and would be updated when the master changes. Does Inventor have a function like this that links a drawing to its copies?
View 5 Replies
View Related
Aug 30, 2013
As everybody know copy/paste excel file into an inventor drawing is sometimes difficult. As you can see in the printscreen a special character is not converted. I supposed it's because this special character is not in the AIGDT or is in the extended character set wich is not considered in Inventor?
View 2 Replies
View Related
Oct 14, 2011
I have a small assembly with the parts. I'm doing an array (pattern) of one of the parts and I tried to do two things without success:
1. Tried to link one of the parts to the assembly itself with the equation tool ,but the software doesn't let me do it and says "...was rejected since it causes a cyclic dependency" - so what?:-) I know and need to do it!
2. After rejected the first choice, I tried to "project geometry" some stuff of the pattern I created in order to try and and make my connection in this way, but then I got a similar rejection: : problem encountered when doing cross part projection"...probably it's because it's from a pattern I'm creating from the part I'm doing this sketch inside?
What Can I do in order to bypass these remarks and make it somehow? Most important, Why can't one "tie" something from a part to its own assembly in which it's located???
Inventor 2012 Pro.
I7 workstation
View 9 Replies
View Related
Dec 27, 2011
I have an existing frame design by Inventor but then i wish to copy out the existing design and modify it ! so i try with the copy function in design assistant but then i found that after i modified the frame size or profile in the copied frame design, the existing frame design changed as well! How to break the link between these two frame design on this case?
View 3 Replies
View Related
Apr 11, 2013
I have prepared NACA profile from the generator. I have the set of points but I don't know how to connect them at once. Is there a possibility to use that without any macros?
View 3 Replies
View Related
Apr 25, 2012
Is it possible to link the dimensions in my .idw to the table in the upper left corner? I want the information in the table to reflect what is in the drawing.
I'm using Inventor 2012
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
View 7 Replies
View Related
Aug 24, 2012
I'm working with some files that must be saved as .ai files and then emailed. I linked a photo, gave it a drop shadow and saved the file. The original file without the photo was about 1.5 mb. The size of the photo is about 2 mb. After I linked the file and then saved it, my .ai file was 21 mb which is too large to email. Why is the file size so large, especially when the picture is not embedded?
View 4 Replies
View Related
Mar 6, 2012
Ok what I'm tring to do is have a spreadsheet that has a list of prices in it that we could modify if needed for all these parts i'm making. Best way is to have the spreadsheet obviously external of the file.Though now I do not know how to do this in iLogic.And example of what I'm trying to do is, with 3 parameters.
A, B, and P
Value "A" and Value "B", these are just read items which when combined will give Value "P" to be imported into the Part file. So need A & B to be read and give the row number for P to be imported.
View 3 Replies
View Related
Oct 26, 2009
when i try to link an excel file to the parameters dialog box i get a message telling me it is "NOT IMPLEMENTED". i just upgraded to windows 7 because it is now supported by autodesk.
View 9 Replies
View Related
Jan 7, 2014
I am trying to link excel file to drawing file (idw), but couldn't succeed.
View 2 Replies
View Related
Mar 2, 2012
I dont know if this is possible or not. What it is, is that we use skeletal modelling, so we use intelligent "master sketches". Now we are just starting to use frame generator also and we want to combine the 2 methods.
An example of how we work is this.......
Lets say, we are designing the base of a basic frame. Now, we sketch in the profile of the RHS that will run along the front of the base and we also sketch in the elevation view of this RHS (see snip 1). This gives us 2 sketches to derive in to create a new part of RHS.
If I change the size of the profile of the RHS within the "master sketch" the newly created RHS part will update to suit. This also applies if I change the length of the RHS within the elevation view within the "master sketch".
So, now we want to add in a 5mm thick plate that sits flush with the top of the RHS, we sketch in a 3mm thick rectangle and make the top line colinear with the top line of the RHS profile sketch (see snip 2). We would then derive through these sketches and use them to create this plate as an ipt.
So now we have 2 parts, 1 length of RHS and 1 piece of plate. If we place these to parts into an assembly and ground them to their "root" then the plate will be sitting flush with the top of the RHS.
If I change the profile of the RHS to 50mm taller in the sketch, then the plate will move up to suit and stay flush with the RHS in the assembly.
NOW, what we want is to use frame generaotor along side this method. Instead of deriving through the first 2 sketches to create the the RHS, we want to create the RHS using frame generator and the elevation sketch BUT what we also want is when we change the profile sketch of the RHS, the Frame generator generated part updates to suit the altered sketch. The reason we want this is because we control all our full assemblies using sketches.
Lets take the same bunch of aforementioned sketches and create the parts using FG.
So I have the RHS profile sketched out at 100x50 and the plate sketch sits colinear with the top of this.
I then go through the motions to create the RHS within FG.
I choose RHS from the drop down menu, then choose 100x50 from the "size" drop down menu. I then use the elevation sketch to specify the length.
Now if I increase the size of the RHS (to 150x50) within the sketch, the plate will move up to suit BUT the actual part of the RHS which was created using FG will still stay the same size (100x50), and the plate will be shown as floating within the assembly!!!
If I do it the other way, i.e. change the size fo the RHS within FG, then the sketch will still show the original size and the plate will still sit flush with this original size. This will show the plate as sitting too low in the assembly!!!
Is there anyway at all, that we can link the profile sketch dimensions to the FG generated parts, so that if we edit the profile size of the RHS to a larger or smaller size then FG will automatically alter the generated part to suit the profile sketch???
Is this at all possible???? Or will we just have to alter both the sketch AND the FG part? We really don't want to use adaptive parts within our assembly, we always just control our assemblies with our "master sketches".
View 2 Replies
View Related
Aug 29, 2013
I am now trying to model a fuselage for an RC plane and am trying to copy a spline from one work plane to a new one and link them together so that if I edit one, it is reflected in the other. Copying and then pasting into the new plane doesn't link the two splines together.
View 9 Replies
View Related
Jan 16, 2012
Op System: Windows 7 Home Premium
Processor: Intel Core I7 960
Ram 12.0 GB system 64 Bit operating system.
MIcrosoft Excel info: Excel 2010 (14.0.4756.1000) MSO(14.0.5113.5000) Microsoft Office Home and Student 2010
Inventor Info: Autodesk Inventor Professional 2012 54 bit edition
Build: 160, release 2012 RTM Date 3/1/2011
When trying to link to excel file get error "Not Implemented". Have tried the registry 'fix' - does not work. Need to get these links working to drive models. This same Excel version works fine for Solidworks which inks perfectly with no issues whatsoever. Inventor has been a problem for 2011,and now 2012 - still not working.
View 2 Replies
View Related
Jul 16, 2013
I am trying to link a Excel spread sheet to an Inventor 2009 part. It worked great on Friday now it is not working. The only thing that changed was that there was a windos update. When it does work I am unable to update any of the parametes that are linked to Excel file as the update button has disappear.
View 2 Replies
View Related
Jun 26, 2013
If I bring link in a dwg file origin to origin. The line work comes in correct and straight but in the wrong position.
If I link in a dwg file by shared coordinates it comes in in the right position but the dwg lines aren't straight if you move the mouse they jump around.
View 1 Replies
View Related
Aug 3, 2011
How can you access user-defined parameters/function defined in the Parameters Manager dialog?
View 1 Replies
View Related
Jun 29, 2013
How can we get the parameters of a inventoer object using vb.net.?
I have 3 parameters named d1,d2,d3 .I want to get these three parameters name and value using API programing using vb.net.
View 1 Replies
View Related
Nov 26, 2013
I was wondering if it would be possible to do the following:
Parameters who can vary for lets say a rectangular profile with:
80x50x2
80x50x3
100x50x2
That these data sets/parameters are grouped/linked to eachother in the Parametric Table.
So when I'm doing my analyses with the profile of 100 and I change the wall thicknes from 2 to 3mm the 100 changes to the 80 variant automaticly, or asks me which version I want.
It would be handy to avoid mistakes with non excisting combinations of profiles.
Is there a custom app for Inventor that allows you to manage parameters easier? (Grouping wise to keep a better overvieuw.)
View 1 Replies
View Related
Mar 15, 2013
Creating User Parameters, can we use trigonometric functions? and can we add these to linear (mm) parameters?
Can we add the Values irrespective of Units i.e. Inch/ Deg/ Unitless
Example: d0 (In) = d1 (In) +d3[ul] + (sin(Variable_Angle))
In value = In Value + ul Value + deg Value
View 6 Replies
View Related
