Basically what I am trying to do is link the length of a flange on one part to a different part. Am I able to take the dimension from another part and say I want this flange to be a certain length plus the seperate part dimension?
View 5 RepliesI have a user that wants to be able to either link dimensions to other dimensions, such as a ref dim to a live dimension or while inserting text in a note on the drawing to be able to list a dimension within that text string to a dimension of the part so as the part updates, the dimension in the text sting updates.
View 9 Replies View RelatedI have a small assembly with the parts. I'm doing an array (pattern) of one of the parts and I tried to do two things without success:
1. Tried to link one of the parts to the assembly itself with the equation tool ,but the software doesn't let me do it and says "...was rejected since it causes a cyclic dependency" - so what?:-) I know and need to do it!
2. After rejected the first choice, I tried to "project geometry" some stuff of the pattern I created in order to try and and make my connection in this way, but then I got a similar rejection: : problem encountered when doing cross part projection"...probably it's because it's from a pattern I'm creating from the part I'm doing this sketch inside?
What Can I do in order to bypass these remarks and make it somehow? Most important, Why can't one "tie" something from a part to its own assembly in which it's located???
Inventor 2012 Pro.
I7 workstation
I am trying to link a Excel spread sheet to an Inventor 2009 part. It worked great on Friday now it is not working. The only thing that changed was that there was a windos update. When it does work I am unable to update any of the parametes that are linked to Excel file as the update button has disappear.
View 2 Replies View RelatedIs it possible to link one part file dimension to another part file?
1. Part first is a cylinder in parametric table i changed it,s name OD , ID and thk. ( find attachment )
Cylinder ID is ( ID=105)
2. Then i made 2 nd part whose step od ( od=102) is going to insert in to cylinder id.There is 3 mm clerance every time
3. So i have to make equction in 2 nd part that ( Step OD= ( ID-3).
means next time when i will change ID of cylinder OD of 2 nd part will ger changed automatically minus by 3 mm than id of cylinder.
I have been trying to sequentially show (and then hide) the dimensions for each feature (together with its related sketch dimensions) in a part browser tree.
I can set the visibility for any one of the sketches with e.g.
oSketches.Item(1).Visible = True
oSketches.Item(1).DimensionsVisible = True 'Show sketch dimension
and show the visibilty of the feature dims with e.g.
Set oFeature = odef.Features.Item(1)
oFeature.FeatureDimensions.Show 'Show feature dimension
but I cannot work out how to test which feature a particular sketch is dependent upon. Until I do this the visibiliy
of the feature and sketch dimensions cannot be synchronised.
I expected something like
If odef.Features.Item(1) = oSketch.Parent might work or maybe the Isownedby function but so far I have had no luck with anything I have tried.
Is there any way to dimension my features, whether it's a sketch or using the hole feature, to either the middle of my part or to a middle plane I have?
I am wanting a group of tapped holes to be the same from the middle of my part, regardless of what the overall size of the part is. How can I dimension like this?
I like to change the dimension of the length from 388mm to 400mm to represent another similar part with another part number. Yet I still need the old part.
What is the easiest way to do so? When I use 'save as" and then change the dimension, I need to recreate the dimensions in the dwg files. Is there a way to avoid creating the dimensions?
I need the dimension of .5 to become .25.It won't work, probably because it is the same dimension of Sheet metal Tickness.
View 3 Replies View RelatedIs it possible to search & find where a dimension listed in the parameters dialog occurs in a part model ( in which sketch for example)?
Inventor Suite 2013 Ultimate
We like to put our dimension lines in CorelDraw 5 on separate layers from the objects being dimensioned. This way we can turn the dimensions ON/OFF depending on our needs. Unfortunately, we find that the dimensions for these objects do not move with the objects on the other layer. We have also found that certain edit operations seem to break the link between the objects on one layer and their dimensions on another layer.
How we can maintain our dimension lines on one layer, the objects on another, and prevent the problems described above?
I have one problem in ilogic "How to convert the normal dimension to driven dimension through ilogic"
View 4 Replies View Relatedhow to make a radius dimension a diameter dimension? I have Inventor Profession 2013.
View 1 Replies View RelatedIs there a way to override a dimension and have it shown as a GD&T Basic dimension. I can override a dimension with the text option but not with a box around the letter. It sounds strange to do this but the letter represents a dimension in a chart format that are Basic dimensions.
View 9 Replies View RelatedIs there a way to make the linear dimension a diameter dimension?
View 9 Replies View RelatedI have a problem I can't figure out. I have a Pipe Style defined that is set to draw my pipes as double lines in plan using the inside pipe diameter. The problem is that there are a few sizes such as 21" & 30" that will not draw/display the double lines to the correct inside pipe dimension.
It will draw a 27" pipe as 10" & a 30" pipe as 12", but all other pipe sizes are drawn crorectly. I have looked at these in part builder & have also rebuilt my parts list.
What would cause certain pipe diameter not be drawn at the correct size it the style is defined correctly?
civil 3d 2012
I am linking a model to an excel spreadsheet. Normally you would specify what cell on the first sheet (Sheet1) to start in. I have been told that you can link to other sheets in the workbook as well. Is this possible? I have tried, but have not been successful. If it is possible, how is it done?
View 6 Replies View RelatedSo i have a box with a left side, right side, top, bottom and a door in an assembly.I've linked all the parameters to the 'right side component' so that when i change it, it updates all the other parts in the assembly.
What I want to accomplish is to be able to use my BASE SIZED BOX ( say 500 x 500 ) to create many different sized boxes.The problem I have is when I save the assembly as a new one and save and replace all the components for the bigger box, all the components still reference the old part ( 500 x 500 right side component) instead of the bigger ( 600 x 600 right side component.
how to link parameters, don't know ilogic, and just know the basics of assemblies and part modeling.
Is there an easy way to remember how to correctly link parameters between 3 or more files? It seems like such a confusing way to do such a simple task. I am going into the parameters of each file and linking or deriving other file properties. Currently I don't have a dummy part file that controls all of the parameters. Maybe that's part of it. I've never done this using excel. Would this be any easier? I am just frustrated with the way I know how and wish there was an easier way to go about it. I keep getting the cyclic dependency warning and somewhat understand what this means, how why it's happening (or how to correct it).
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
Wondering if it was possible to have a .idw drawing automatically update all its copies with any annotation changes. They would all be linked to the same model and would update if the model was altered, but I need only one master drawing whose annotations can be altered. The copies would be read-only, and would be updated when the master changes. Does Inventor have a function like this that links a drawing to its copies?
View 5 Replies View RelatedI have an assembly drawing made with 2 parts in it. I have the assembly drawing as Sheet 1 and each part also in the file as Sheet 2 and Sheet 3. What I have a problem with is that when I change or update the original files for Sheets 2 and 3 it doesn't update the sheets in the assembly drawing. Is there a way to keep these files connected. I need to have the standard sheets for filing and part designation, but when production call for the assembly to be needed, the assembly (Sheet1) with the Attached part drawings (Sheets 2 & 3) hit the production floor. Without them linked a mistake will be made. There are to many engineers in my department and we all make production changes to parts and if they are not linked bad things will happen. I am just trying this out, we have a lot of assemblies that will be great for the production if I can get all the part and assembly files to work together and print at the same time from on file.
I am using Inventor 2012 if that matters.
As everybody know copy/paste excel file into an inventor drawing is sometimes difficult. As you can see in the printscreen a special character is not converted. I supposed it's because this special character is not in the AIGDT or is in the extended character set wich is not considered in Inventor?
View 2 Replies View RelatedI have an existing frame design by Inventor but then i wish to copy out the existing design and modify it ! so i try with the copy function in design assistant but then i found that after i modified the frame size or profile in the copied frame design, the existing frame design changed as well! How to break the link between these two frame design on this case?
View 3 Replies View RelatedI have prepared NACA profile from the generator. I have the set of points but I don't know how to connect them at once. Is there a possibility to use that without any macros?
View 3 Replies View RelatedIs it possible to link the dimensions in my .idw to the table in the upper left corner? I want the information in the table to reflect what is in the drawing.
I'm using Inventor 2012
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
Ok what I'm tring to do is have a spreadsheet that has a list of prices in it that we could modify if needed for all these parts i'm making. Best way is to have the spreadsheet obviously external of the file.Though now I do not know how to do this in iLogic.And example of what I'm trying to do is, with 3 parameters.
A, B, and P
Value "A" and Value "B", these are just read items which when combined will give Value "P" to be imported into the Part file. So need A & B to be read and give the row number for P to be imported.
when i try to link an excel file to the parameters dialog box i get a message telling me it is "NOT IMPLEMENTED". i just upgraded to windows 7 because it is now supported by autodesk.
View 9 Replies View RelatedI am trying to link excel file to drawing file (idw), but couldn't succeed.
View 2 Replies View RelatedI dont know if this is possible or not. What it is, is that we use skeletal modelling, so we use intelligent "master sketches". Now we are just starting to use frame generator also and we want to combine the 2 methods.
An example of how we work is this.......
Lets say, we are designing the base of a basic frame. Now, we sketch in the profile of the RHS that will run along the front of the base and we also sketch in the elevation view of this RHS (see snip 1). This gives us 2 sketches to derive in to create a new part of RHS.
If I change the size of the profile of the RHS within the "master sketch" the newly created RHS part will update to suit. This also applies if I change the length of the RHS within the elevation view within the "master sketch".
So, now we want to add in a 5mm thick plate that sits flush with the top of the RHS, we sketch in a 3mm thick rectangle and make the top line colinear with the top line of the RHS profile sketch (see snip 2). We would then derive through these sketches and use them to create this plate as an ipt.
So now we have 2 parts, 1 length of RHS and 1 piece of plate. If we place these to parts into an assembly and ground them to their "root" then the plate will be sitting flush with the top of the RHS.
If I change the profile of the RHS to 50mm taller in the sketch, then the plate will move up to suit and stay flush with the RHS in the assembly.
NOW, what we want is to use frame generaotor along side this method. Instead of deriving through the first 2 sketches to create the the RHS, we want to create the RHS using frame generator and the elevation sketch BUT what we also want is when we change the profile sketch of the RHS, the Frame generator generated part updates to suit the altered sketch. The reason we want this is because we control all our full assemblies using sketches.
Lets take the same bunch of aforementioned sketches and create the parts using FG.
So I have the RHS profile sketched out at 100x50 and the plate sketch sits colinear with the top of this.
I then go through the motions to create the RHS within FG.
I choose RHS from the drop down menu, then choose 100x50 from the "size" drop down menu. I then use the elevation sketch to specify the length.
Now if I increase the size of the RHS (to 150x50) within the sketch, the plate will move up to suit BUT the actual part of the RHS which was created using FG will still stay the same size (100x50), and the plate will be shown as floating within the assembly!!!
If I do it the other way, i.e. change the size fo the RHS within FG, then the sketch will still show the original size and the plate will still sit flush with this original size. This will show the plate as sitting too low in the assembly!!!
Is there anyway at all, that we can link the profile sketch dimensions to the FG generated parts, so that if we edit the profile size of the RHS to a larger or smaller size then FG will automatically alter the generated part to suit the profile sketch???
Is this at all possible???? Or will we just have to alter both the sketch AND the FG part? We really don't want to use adaptive parts within our assembly, we always just control our assemblies with our "master sketches".
I want to link the thickness of the material used for a steel structure of to the offset of another steel structure that attaches to that it. I want to be able to change the size and material used for the frame and not have to continually change the offset of the piece attached to it. Is there a way to lind the thickness of one bar to the offset of another?
View 6 Replies View RelatedI am now trying to model a fuselage for an RC plane and am trying to copy a spline from one work plane to a new one and link them together so that if I edit one, it is reflected in the other. Copying and then pasting into the new plane doesn't link the two splines together.
View 9 Replies View Related