when i try to link an excel file to the parameters dialog box i get a message telling me it is "NOT IMPLEMENTED". i just upgraded to windows 7 because it is now supported by autodesk.
View 9 RepliesOp System: Windows 7 Home Premium
Processor: Intel Core I7 960
Ram 12.0 GB system 64 Bit operating system.
MIcrosoft Excel info: Excel 2010 (14.0.4756.1000) MSO(14.0.5113.5000) Microsoft Office Home and Student 2010
Inventor Info: Autodesk Inventor Professional 2012 54 bit edition
Build: 160, release 2012 RTM Date 3/1/2011
When trying to link to excel file get error "Not Implemented". Have tried the registry 'fix' - does not work. Need to get these links working to drive models. This same Excel version works fine for Solidworks which inks perfectly with no issues whatsoever. Inventor has been a problem for 2011,and now 2012 - still not working.
I am trying to link excel file to drawing file (idw), but couldn't succeed.
View 2 Replies View RelatedI've previously used Autocad 2008 Electrical. I've just started a new job and I have been asked to update some electrical drawings from a recent project. My current employer use Autocad 2010 as opposed to Autocad Electrical which I have previously used.
The problem I have is that I have a drawing with a table linked to an Excel spreadsheet that displays an I/O table.
Since the drawings have changed the amount I/O has increased.
I have a new excel sheet with the new I/O list which is larger than the old I/O list.
When I "point" the Table to look at the new spreadsheet in the "Modify Excel Link" Dialogue and alter the "Link to Range" Tab to my new desired excel sheet and apply the changes the table. The new excel sheet populates the table correctly until the end of the old table used to stop then the format goes all to hell and the new part of the table is way out of scale and at 90 degrees out to the original table.
I think I am possibly missing a step somehwere when updating the Data Table Links!?!?....Do I need to alter the table properties somewhere too?.
I am linking a model to an excel spreadsheet. Normally you would specify what cell on the first sheet (Sheet1) to start in. I have been told that you can link to other sheets in the workbook as well. Is this possible? I have tried, but have not been successful. If it is possible, how is it done?
View 6 Replies View RelatedAs everybody know copy/paste excel file into an inventor drawing is sometimes difficult. As you can see in the printscreen a special character is not converted. I supposed it's because this special character is not in the AIGDT or is in the extended character set wich is not considered in Inventor?
View 2 Replies View RelatedIs there a possibility to furnish a hyperlink linking on a defined Excel-data sheet within an Excel file? Are there other possibilities to tie together to a drawing object external additional information, e.g., a product name, product data or product pictures?
View 1 Replies View RelatedOk what I'm tring to do is have a spreadsheet that has a list of prices in it that we could modify if needed for all these parts i'm making. Best way is to have the spreadsheet obviously external of the file.Though now I do not know how to do this in iLogic.And example of what I'm trying to do is, with 3 parameters.
A, B, and P
Value "A" and Value "B", these are just read items which when combined will give Value "P" to be imported into the Part file. So need A & B to be read and give the row number for P to be imported.
I am trying to link a Excel spread sheet to an Inventor 2009 part. It worked great on Friday now it is not working. The only thing that changed was that there was a windos update. When it does work I am unable to update any of the parametes that are linked to Excel file as the update button has disappear.
View 2 Replies View RelatedI linked an excel (2010) file with an inventor (2011) .ipt and none of the parameters are showing inside inventor. I was leaving the file external but I embed it also as a trouble shooting step and nothing still. I have no spaces in excel sheet. Is there something special i need to be doing inside excel or inventor?
View 5 Replies View RelatedWell I had a day and a half trying to figure out how to bring Excel data into LT. Again. Here is what I have found out:
Running Excel 2010 I have a xls files (of type '97-2003 xls - file includes VBA). The file spits out a ton of data that I want to put in a schedule in AutoCAD. The schedule format needs to match our standard format - RomanS in white and blue.
If I copy and paste as a link the font remains stuck as Arial (regardless of source font) and can't be relaxed unless you go one cell at a time in the text editor. Also the resultant table size is tiny -
If I save the file to .XLSM (macro enabled '10 excel file) the results are the same. If I save the file to .XLSX ('10 excel file and ditch the VBA project) the results are sublime - the font is ok and I can go back and forth from AutoCAD to my now broken spreadsheet because VBA IS MISSING! The resultant table size is tiny but I can deal. I don't see how AutoCAD can work with xlsx but not xlsm.
I also found that if I save the sheet (values only) as a .csv file I can use that to create a table from file without font overrides screwing everything up.
I'm running AutoCAD LT 32bit on a Win7 32bit OS. My Office version is 2010. I would like to link data to a '97-'03 version of an xls or an xlsm without having the font overridden to Arial.
I'm trying to figure out a way to do the following:
I have several drawing files in DWG. Each DWG has a block placed in a drawing sheet. The block contains attributes which would like to link to an Excel file.
Then if I update the attribute in the drawings this would change the linked attribute in the Excel file, and vice versa.
Note that there are several drawings which I would like to handle in a single Excel file.
I need to export the areas of multiple closed polygons to excel and update that excel as soon as the areas change. We've been using an outside contractor who is able to do this using land f/x.
View 2 Replies View RelatedCreate a large number of polygons (plines, parcels, whatever) that represent spaces on a building plan
Assign a space number to the polygon
Link the space number to an Excel spreadsheet (or Access DB) so that the characteristics of the polygon (line and fill color, for example) are chosen based on the "owner" of the space (e.g.; Engineering, Common Areas, etc.).
Display a label stating the space number and the space name. Is this best done with "Parcels" in Civ3D, or with "Polygons" in Map, or some other way.
I would like to link an Excel table to a SHP file via a column in commun. My SHP file and Excel Spreadsheet share one same column filled with numbers. So it's neither simply import Excel table, nor import with points.
But I don't know if I should use "Data Link" or "Add ODBC connection" or "FDO import", or some other fonctions...
I'm looking for a way to export all iproperties, (from a selection or a directory), from windows browser, and CSV import into excel.
What I'm looking to do is, be able to select hundreds of files from the windows browser, either select the directory, (and it's sub-directories), or a selection of files, and extract their iproperties, and place the contents into excel similar to exporting contacts from outlook and importing them into excel.
What I would like to do is find a way to use a dynamic block, which has already been created, and once I put in the proper length, speed, type of conveyor, etc., it will automatically update an excel spreadsheet, for example a power estimate, or cost estimate sheet. Is this possible, if so, what is the quickest, and easiest way to do this?
Also, what formula would I use in excel to link back to the DWG?
We have this problem at the moment with an Microsoft excel file that appears to have become stuck in the External references list, Ref C1-01-06. We would like to remove it if possible as it is now superseded (we can't change the file name unfortunately. What do we do if we can't reload, detach or bind? Its not referenced into anything else that is attached to the file, it is a direct attachment of the file that we are in.
View 3 Replies View RelatedI am making an excel spreadsheet that has a list of all the drawings we have on file, an inventory list per say. I have all of the drawings hyperlinked.
View 3 Replies View RelatedI'm really in trouble at work on linking Microsoft excel tables to Photoshop. I have some excel tables. I want to import them into Photoshop (not as an image) that when i changed the values in cells (excel) i want the Photoshop file to update.. Should i use a script or any programs?
View 3 Replies View RelatedIf I place a link to a dwg as a hyperlink in an Excel file, AutoCAD freezes. It opens the drawing, then AutoCAD is completely locked. I have to close it through task manager.
This has been tested wih multiple drawings and excel file and it happens in all of them. I'm using Excel 2010 and AutoCAD 2010.
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
This has happened on all versions of AutoCAD in our office.
I paste schedules from Excel into AutoCAD. I print out the sheets and ghost lines appear on the PDF and hard copy that were not intentionally place in the excel file. What is happening and what can be done about it.
I also paste a tif file on a sheet change the setting to imageframe <0> and a residual line willl appear in pdf and hard copy that seems to be the border of the tif image.
Regarding the conversion of an excel sheet into Illustrator variables... I am able to import an excel sheet into Illustrator datasets. I am curious if it is possible to link the excel file to the Illustrator data sets, so that when I alter something within the excel sheet, the data sets automatically change. Is this possible? Or must I always freshly convert/import the excel file?
View 2 Replies View RelatedI have recently upgraded from AutoCAD 2008 to 2001. Now when opening a file from windows explorer (desktop vs the AutoCAD browser) and AutoCAD is not running. AutoCAD will startup and open a new drawing as well as bring up the dialog box for finding a file to open, which I cancel, THEN open the drawing that I have selected. I have not seen this before and am wondering what variable or option is causing to happen. I am also seeing two icons for the same drawing file in the Windows task bar.
View 2 Replies View RelatedI created an assembly, so far with one part in it. I created an Excel spreadsheet with several dimensions in it that would be used in the assembly parts. I went to Manage>Parameters and linked the spreadsheet. The Excel file appeared in the Parameter Dialog Box with the parameters included in it. However, when I create a part in the assembly and attempt to dimension a sketch in it, the parameters option in the dimension box is not present.
I have done this in the past in IV2009, has anything changed that I cannot do so in 2010?
I've spent the last 4 hours searching for an answer to this question, but I simply can't find one.
As a start I think you have to know that I'm currently using AutoCAD 2012.
Here's the problem: I need to extract some info from an AutoCAD table to a reference file that can be opened in Microsoft Excel. Everything I find on the subject is actually an answer to the question "How does <DATAEXTRACTION> work?" or "How to do an extraction of DATA in AutoCAD?"....
In this particular case I have a set of production drawings (cut tickets) for manufacturing of stone. And in every single sheet I have this material schedule or a table, if you wish, that is made with an AutoCAD table. In this schedule I have the height, width and thickness of the stone plate and with a function it measures it's area and volume. What I want to do is to extract those values into a reference file that I can open with Microsoft Excel, as I already said.
How exactly?
I'm having some trouble setting my workflow and I need linking data to corel draw from excel. Basically, what I want to do is to have excel data automatically copy from Excel to Draw and "Paste Special / Paste Link Objects/MS Excel Worksheet is almost what I need.
It would be perfect if only it would copy CONTENT of the Excel file or cells, not their formating (font, size, border etc.) which I want to do in Corel, since separation of the content (excel) and form (draw) would be just natural and functional - don't want my number crunchers to affect design of the Draw document, just as I don't want to have my designer to do the math
So - is there way to link objects (cells from Excel) but to transfer content (text) only or should I revert to VBA?
I'm linking an excel file to an .ipt file with iLogic code determining if the Material type is a certian value it will find the correct material thickness. These file work great when working on them thru Vault but when I "Save As Template" and create this file where our other template files are located (not Vault) this fuction does not work. I have realized that I had to place the a copy of the excel file in the same file folder as the template ipt, but even this does not fix the issue.
I recieve this error:
Error in rule: Material, in document: Part6
'MWW Materials (Inventor).xlsx' could not be found. Check the spelling of the file name, and verify that the file location is correct.
If you are trying to open the file from your list of most recently used files, make sure that the file has not been renamed, moved, or deleted.
It seems completly countintutive that just saving the file as a template file would cause this not to work when all files that are required are located in the same file folder. Maybe I need a reference to the excel document within the iLogic code.
i have deleted the excel file from the ipt file but when i open the part file it is still looking for the excel file. i am using inv 10 sp1 and excel 2000
View 7 Replies View RelatedHere is what im running
OS: Windows 7 x64
Autodesk software: Autodesk Product Design Suite Premium 2012
Microsoft software: MS Office 2010 Starter which includes Word & Excel ONLY.
Error message from Inventor when trying to open an Ipart :
"Excel installation is required for this operation. Failed to launch Excel."
FYI.. this solution doesn't work [URL]
don't have this registry key HKEY_CLASSES_ROOTWow6432NodeCLSID{00024500-0000-0000-C000-000000000046}
OS: Windows 7 x64
CPU: Intel Core i5 @3.0 GHz,
Ram: 8 GB Harddisk: 1TB
Software: Autodesk Product Design Suite Premium 2012
When I search an autoCAD file from windows 7, it only shows me the backup file and missed the DWG file. I’m using Window 7 professional, service pack 1, 64-bit operating system; AutoCAD2012. Are there any way to change the seetings so I can see the DWG file?
View 9 Replies View Related