AutoCAD 2010 :: Open File Via Excel Hyperlink
Jan 28, 2010I am making an excel spreadsheet that has a list of all the drawings we have on file, an inventory list per say. I have all of the drawings hyperlinked.
View 3 Replies
ADVERTISEMENT
AutoCad :: Can't Get Excel Hyperlink In Drawing To Open
Apr 21, 2011I cant get a Excel hyperlink in a drawing to open. Is there a way to find out where they are stored?
View 1 Replies View RelatedAutoCAD Architecture :: Furnish Hyperlink Linking On Defined Data Sheet Within Excel File
Jan 15, 2013Is there a possibility to furnish a hyperlink linking on a defined Excel-data sheet within an Excel file? Are there other possibilities to tie together to a drawing object external additional information, e.g., a product name, product data or product pictures?
View 1 Replies View RelatedAutoCAD 2010 :: Excel File Attachment
Nov 29, 2012We have this problem at the moment with an Microsoft excel file that appears to have become stuck in the External references list, Ref C1-01-06. We would like to remove it if possible as it is now superseded (we can't change the file name unfortunately. What do we do if we can't reload, detach or bind? Its not referenced into anything else that is attached to the file, it is a direct attachment of the file that we are in.
View 3 Replies View RelatedAutoCAD 2010 :: Hyperlink On Ribbon
Oct 12, 2012Everytime I try to attach a Hyperlink to a dwg via the ribbon Hyperlink button I receive a FATAL ERROR: Unhandled Access Violation Reading 0x0000 Exception at e1e7b028h.
View 1 Replies View RelatedAutoCAD 2010 :: Link To DWG Inside Of Excel File Freezes
Oct 1, 2013If I place a link to a dwg as a hyperlink in an Excel file, AutoCAD freezes. It opens the drawing, then AutoCAD is completely locked. I have to close it through task manager.
This has been tested wih multiple drawings and excel file and it happens in all of them. I'm using Excel 2010 and AutoCAD 2010.
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
AutoCAD Inventor :: Linking An Excel File Using 2010 And Windows 7?
Oct 26, 2009when i try to link an excel file to the parameters dialog box i get a message telling me it is "NOT IMPLEMENTED". i just upgraded to windows 7 because it is now supported by autodesk.
View 9 Replies View RelatedAutoCAD Inventor :: Excel (2010) File With IPT And None Of Parameters Are Showing
Jul 20, 2012I linked an excel (2010) file with an inventor (2011) .ipt and none of the parameters are showing inside inventor. I was leaving the file external but I embed it also as a trouble shooting step and nothing still. I have no spaces in excel sheet. Is there something special i need to be doing inside excel or inventor?
View 5 Replies View RelatedAutoCAD 2010 :: Paste Excel File - Ghost Lines Appear In PDF
Apr 5, 2013This has happened on all versions of AutoCAD in our office.
I paste schedules from Excel into AutoCAD. I print out the sheets and ghost lines appear on the PDF and hard copy that were not intentionally place in the excel file. What is happening and what can be done about it.
I also paste a tif file on a sheet change the setting to imageframe <0> and a residual line willl appear in pdf and hard copy that seems to be the border of the tif image.
AutoCAD 2010 :: Hyperlink In PDF Created From Drawing
Jul 16, 2013Three years ago I created a drawing in which I inserted Hyperlinks into the drawing. When I made a PDF from the drawing the Hyperlinks were still there and worked correctly from the PDF. Not sure which version of AutoCAD this was created from. I am now using 2012 and have tried to repeat the process but when I create the PDF the Hyperlinks are not there.
View 4 Replies View RelatedAutoCAD Inventor :: Open Excel File (start Application And Show Worksheet From ILogic)
Nov 11, 2013I'm trying to start Excel and show the results of some BOM items I have written to a file like item number, part number and description.The task is to find components in an assembly that have a part number longer then 39 characters, due to ERP limitations.
What I´m doing is cycling through all BOM (structured) items on first level and check if the part number is longer then 39 characters.
I write these item number, part number, description to an Excel file (temp.xlsx), so the user sees which Components he has to check for the Part Number (make it shorter). I figured it would be best to do that with an excel file, so the user can save the results to a new file or just check it.
Values will be erased from the temporary excel file afterwards.Here I can't figure out how to start the excel application and open the file in an actual application window if possible.
how to list the results with plain iLogic that would do it too or some other solution to list a snapshot from the BOM.I guess there is no way to add your custom BOMViews ?
AutoCAD LT :: 2010 Crashes Every Time Try And Create A Hyperlink
Dec 5, 2011I'm running LT2010 on a Windows 7, every time I try and create a hyperlink the page freezes then comes up with a fatal error message. I then have to recover the drawing..
View 3 Replies View RelatedAutoCAD 2010 :: Hyperlink Fields In Sheet Sets?
Nov 8, 2012I have a ss that I am using & wish to generate a drawing index sheet. I can manually update the fields in the drawing index table on the index drawing, but I would like to have this automatically work for every sheet set I generate.Would I need to use hyperlinking fields for this to work?
Autodesk Plant 3D Premium 2012
Autodesk MEP 2012
HP 3.2 Ghz CPU 16 ram
1TB 7200 rpm SATA 3Gb/s hard drive
2GB DDR3 NVIDIA GeForce GT 530
HP 2311x 23" LED Monitor
AutoCAD 2010 :: Extract Some Info From Table To Reference File That Can Be Opened In MS Excel
Jun 15, 2013I've spent the last 4 hours searching for an answer to this question, but I simply can't find one.
As a start I think you have to know that I'm currently using AutoCAD 2012.
Here's the problem: I need to extract some info from an AutoCAD table to a reference file that can be opened in Microsoft Excel. Everything I find on the subject is actually an answer to the question "How does <DATAEXTRACTION> work?" or "How to do an extraction of DATA in AutoCAD?"....
In this particular case I have a set of production drawings (cut tickets) for manufacturing of stone. And in every single sheet I have this material schedule or a table, if you wish, that is made with an AutoCAD table. In this schedule I have the height, width and thickness of the stone plate and with a function it measures it's area and volume. What I want to do is to extract those values into a reference file that I can open with Microsoft Excel, as I already said.
How exactly?
AutoCAD 2013 :: Paste Special Excel Files That Automatically Update / When Excel File Changes
May 29, 2013I have AutoCAD 2013 and often "paste special" excel files that automatically update when the excel file changes.The problem I'm running into is I work with a person who has uses an older version of CAD 2004, so I always save to the older format for him.
When I etransmit, I be sure to add the excel file, but when he opens the dwg, only the outline of the excel appears in his dwg, no content.
AutoCAD 2010 :: Preventing PDF Viewer To Open Drawing File When Plotting To PDF File?
Mar 9, 2012As an engineering company we have started to convert hundreds of our drawings from AutoCAD to PDF using a batch utility.
However every file that is converted into a PDF file is opened by a PDF Viewer. We want to prevent this.
I opened my *.pc3 file and removed the check from the appropriate box. See below
I press OK, then save the file and close. However when I reopen the file, I see the box for Openining in PDF Viewer has been rechecked. No matter what I do, I cannot permanently remove the check from this box.
AutoCAD 2010 :: 2 Files Open - Upon Quitting Of 1 File Other File Goes Black
Jun 10, 2012When I have 2 files open, one minimized and the other visible on the screen, when I quit the file showing on the screen and then open the one that was minimized, it comes up w/a blank black screen. There is no way I have found to get the info in the file to display.
Then, if I save the blank screenof previously minimized file, close it then reopen it the info is back on screen with changes made to the file intact.
AutoCAD 2010 :: Extract Text To Excel File Or Find MEAN Value Of Text
Jul 6, 2012I have a drawing which has hundreds of levels on and i'm trying to establish what the MEAN level is and the AVERAGE level. I thought the best way might be to extract the text to excel and perform it there but at the moment the only way i can do it is to copy and paste the text and its taking me forever. Is there a way to either a) extract text to excel or b) calculate a MEAN value based on texted selected?
View 2 Replies View RelatedAutoCAD 2010 :: DWG File Will Not Open In IE 8
Oct 24, 2013quick back ground - Windows 7 64 Bit - Autocad 2010 installed - IE 8 32 / 64bit - Lotus Notes 8.5
Our DWG files are stored in a shared folder, and we use a Lotus Notes DataBase to browse for drawings as you can put information with the DB Entry.
When you click Open drawing IE 8 pops up but the window is blank. PDF's open fine in IE 8.
why the dwg drawings are blank?
AutoCAD 2010 :: Can't Open DWG File
Dec 4, 2012I'm working in AutoCAd 2012. I tried to open a set of working drawings that i've been working on. The file won't open. So far, with no success, I've tried:
a) renaming the .bak file as a dwg and opening it.
b) inserting the file in a new drawing
c) inserting the file as an xref in the new drawing
d) using recover to recover and fix the file
e) using recover to open the backup file
f) using the partial open command to open the file.
Illustrator :: PDF - Entire File Is A Hyperlink
Jun 30, 2013On Mac OS X 10.8, Illustrator CS 5 (Adobe CS5.5)
I'm creating my resume in illustrator, very very basic stuff. Not special settings or anything, just a few guides and lines of text. I've tried creating a new document and retyping everything to no avail.
Basically when I'm done formatting and creating the resume how I like it, I Save As to PDF and open it up in Preview, Reader and the built in pdf viewer in my browsers and noticed that the entire document is now a clickable link...center of the page, near the top of the page etc. Its picking up one of my reference contact's email addresses from the bottom of the page.
So i tried changing from paragraph left to paragraph center and it seems to stop the issue. but if i revert back to my preferred formatting its there again.
When I remove their email, no longer a problem. and i can revert to my prefered formatting and with his emial remove the reference below his, their email is intact and not casuing the problem.
My previous resume formatting was all in paragraph center formatting so it was never a problem..
AutoCAD 2010 :: How To Open Back Up File
Mar 21, 2012I use auto cad 2010.In my computer .dwg file is deleted but .bak is in my computer but when i rename the .bak file to .dwg file but it not open in auto cad 2010.
View 5 Replies View RelatedAutoCAD 2010 :: File Dialog Box Won't Open
Sep 18, 2012I'm having a problem that my file dialog box won't open when I go to open, new or save as. When I hit open, new or save as the command bar wants you to type the file name. My co-worker told me to type CMDDIA and change it to 1. But that didn't work for my error. How to fix my AutoCAD issue. I attached a .jpg of what the command bar looks like when I hit the open button.
View 2 Replies View RelatedAutoCAD 2010 :: Can't Open DXF File Properly
Oct 24, 2012I downloaded a model of guitar as .dxf file from here. But somehow it opens like the image attached below. I've changed the visual style to realistic but it seems, its all just lines and no solid body.
View 4 Replies View RelatedAutoCad :: 2010 File Doesn't Open
May 18, 2011The file autocad 2010 (dwg) that I've been working for ages doesn't open. It starts loading but then get stuk on 96%. I tried to recover it and no errors are detected.
View 9 Replies View RelatedAutoCAD 2013 :: Does File On 2014 Open On 2010
Nov 3, 2013Does a file on AutoCAD 2014 open on AutoCAD 2010?
View 4 Replies View RelatedAutoCAD 2010 :: Freezes When Trying To Open New File Or Save As?
Oct 2, 2012we have a new lab in our district with Autocad 2010 64-bit version installed on HP Compaq 8022 Elite SFF computers. There is 4 GB memory on the computers and a Quadro 400 graphics card. Autocad and Windows 7 64-bit have both been updated to the latest versions. The Autocad application locks up almost every time someone chooses the new document icon, or when they try to 'save as'. Sometimes when they choose to open a new document first, close that dialogue box, then try to choose the new document icon it works ok. But, for the most part, the application is unuesable. Some possible solutions we found online that don't work are to not use the Aero themes (we don't) and to not use Norton AV (we don't).
View 9 Replies View RelatedAutoCAD 2010 :: Crashes When Try To Open Existing File
Jun 6, 2013I installed AutoCAD on my pc with windows 7 and to complete the installation I had to change the registry file EULA from 0 to 1. Now it works but when I try to open an existing file it crashes.
View 1 Replies View RelatedAutoCAD 2010 :: Freezing During File Open Process
Sep 6, 2011I am having issues with my computer completely freezing while performing a File, Open process. I'm in drawing 1, I save it, then go to open drawing 2. Drawing 1 will save, the open file window pops up. With me so far? While navigating through the file directory tree, my computer freezes. I do not chose a file that freezes during opening. It is during the process of getting to the folder drawing 2 resides in, and then it freezes. This happens to me multiple times a day. Ctrl +Alt+Delete will not work. I have tried letting my computer sit, as you would with a program not responding, and it doesn't unfreeze. The only option I am left with is a hard reboot. The only other program I have running is my MS Outlook.
I have been back and forth with our IT person, and because he can't replicate the problem (after trying one file open), he can't figure it out, or doesn't want to.
I am running AutoCad 2012 with a Dell Precision T3500, 2.13ghz, intell xenon E5506 processor, and 4gb of RAM. After looking at the system requirements, and reading that 2012 needs a 3.0 or higher processor, could this be the route of my issue?
AutoCAD 2010 :: Open And Save File Dialog Box
May 30, 2012I used to be able to save as and browse to the file where I want to sane or open a file
Now I get a dialog box where I can only save to the default location or manually enter the path and file name
Same with opening a file - I go file open and it is gives a path to the last file I used. There is option to browse - how I get this back to the normal function of open/save by browsing?
AutoCAD 2010 :: System Cannot Open Device Or File Specified
May 28, 2011Starting Installations with Setup view screen the following error message:
The system cannot open the device or file specified.
C:UsersNombreAppDatalocalTemp\_AI4662.tempx86en-usComponentsadr2012SetupDesignReview2012.msi
