AutoCAD Inventor :: ILogic And Excel Spreadsheets - Linking Values
Mar 6, 2012
Ok what I'm tring to do is have a spreadsheet that has a list of prices in it that we could modify if needed for all these parts i'm making. Best way is to have the spreadsheet obviously external of the file.Though now I do not know how to do this in iLogic.And example of what I'm trying to do is, with 3 parameters.
A, B, and P
Value "A" and Value "B", these are just read items which when combined will give Value "P" to be imported into the Part file. So need A & B to be read and give the row number for P to be imported.
View 3 Replies
ADVERTISEMENT
May 31, 2013
I would like to link an Excel table to a SHP file via a column in commun. My SHP file and Excel Spreadsheet share one same column filled with numbers. So it's neither simply import Excel table, nor import with points.
But I don't know if I should use "Data Link" or "Add ODBC connection" or "FDO import", or some other fonctions...
View 9 Replies
View Related
Jun 5, 2013
What I would like to do is find a way to use a dynamic block, which has already been created, and once I put in the proper length, speed, type of conveyor, etc., it will automatically update an excel spreadsheet, for example a power estimate, or cost estimate sheet. Is this possible, if so, what is the quickest, and easiest way to do this?
Also, what formula would I use in excel to link back to the DWG?
View 9 Replies
View Related
Jul 25, 2013
Regarding the conversion of an excel sheet into Illustrator variables... I am able to import an excel sheet into Illustrator datasets. I am curious if it is possible to link the excel file to the Illustrator data sets, so that when I alter something within the excel sheet, the data sets automatically change. Is this possible? Or must I always freshly convert/import the excel file?
View 2 Replies
View Related
Jan 14, 2011
I have an Embedded spreadsheet in a .ipt file. I want to access the data in it using iLogic, but i keep getting this error...
GoExcel: 3rd Party worksheet not found: "3rd Party:Embedding 1", Sheet: "Sheet1"
Do I need to declare the spreadsheet somehow, or is there something else I missing? This is the only code I have in the rule...
i = GoExcel.FindRow("3rd Party:Embedding 1", "Sheet1", "ID", "=", 1
View 9 Replies
View Related
Mar 3, 2012
I am linking a model to an excel spreadsheet. Normally you would specify what cell on the first sheet (Sheet1) to start in. I have been told that you can link to other sheets in the workbook as well. Is this possible? I have tried, but have not been successful. If it is possible, how is it done?
View 6 Replies
View Related
Aug 30, 2013
As everybody know copy/paste excel file into an inventor drawing is sometimes difficult. As you can see in the printscreen a special character is not converted. I supposed it's because this special character is not in the AIGDT or is in the extended character set wich is not considered in Inventor?
View 2 Replies
View Related
Oct 26, 2009
when i try to link an excel file to the parameters dialog box i get a message telling me it is "NOT IMPLEMENTED". i just upgraded to windows 7 because it is now supported by autodesk.
View 9 Replies
View Related
Jan 7, 2014
I am trying to link excel file to drawing file (idw), but couldn't succeed.
View 2 Replies
View Related
Dec 12, 2012
I have been having an issue when printing to PDF from AutoCAD my Excel spreadsheets show up with gridlines that are not there in there Excel or CAD. I have tried a number of things to eliminate that lines (see list below) but nothing has worked so far. I am running AutoCAD 2012 and Excel 2003. I have inserted the spreadsheet using "Paste Special" so that I can continue to work on the spreadsheet in excel and it will update in CAD.
- I have changes the Plot Quality. In Monochrome the lines print. Low quality the spreadsheet does not show up. High quality again nothing shows up
- In Excel I have turned off the "Gridlines" and re-copied into AutoCAD. The lines still show up when printing to PDF
- If I paste as an AutoCAD Entity I can not update in Excel
View 4 Replies
View Related
Apr 19, 2012
I have a new issue that I am unsure what to do about.
This has never occurred with previous version of ACAD and this is the first time I created data links with Autocad 2012, and I am using the same procedure that I have successfully used in the past.
I have data tables linked to excel spreadsheets. I used the "TABLE" button on the ANNOTATE ribbon to place the table, and the layout of the cells assumes the layout of the excel spreadsheet, which is what I want.
As long as I don't Scale the table, I can Update the data table links just fine.
However when I scale the table and then update table links, the table layout changes drastically, and is undesirable.
I have tried locking the cells' but that will not fix the problem.
I want to keep the layout of the table that is assumed when I place the table originally. Is there any way to lock it as such?
View 0 Replies
View Related
Mar 13, 2012
We had a client who could not open our drawings that had linked Excel spreadsheets in them even though we supplied the spreadsheets. The drawings would crash AutoCAD when they tried to open them.
My solution was to open the drawings, pick on the Linked Spreadsheet OLE in the drawing, Ctrl+C (Edit > Copy) then I Edit > Paste Special > As Image. I would paste it in at the lower left corner of the existing spreadsheet.
I set the properties of the new OLE so the Lock Aspect Ratio was Off or No and drag the upper right corner of my newly inserted image to the upper right corner of the existing linked spreadsheet so it would be a perfect match.
I then erased the existing linked spreadsheet.
Now they can open the files and we don't need to include the spreadsheet when we send the files.
[URL]....
View 2 Replies
View Related
Mar 2, 2007
how to extract pile coordinates to excel or spreadsheets, or anything that works and is quicker than just individual pile coordinates. i have about 446 piles.
View 9 Replies
View Related
Jan 16, 2012
Op System: Windows 7 Home Premium
Processor: Intel Core I7 960
Ram 12.0 GB system 64 Bit operating system.
MIcrosoft Excel info: Excel 2010 (14.0.4756.1000) MSO(14.0.5113.5000) Microsoft Office Home and Student 2010
Inventor Info: Autodesk Inventor Professional 2012 54 bit edition
Build: 160, release 2012 RTM Date 3/1/2011
When trying to link to excel file get error "Not Implemented". Have tried the registry 'fix' - does not work. Need to get these links working to drive models. This same Excel version works fine for Solidworks which inks perfectly with no issues whatsoever. Inventor has been a problem for 2011,and now 2012 - still not working.
View 2 Replies
View Related
Jul 16, 2013
I am trying to link a Excel spread sheet to an Inventor 2009 part. It worked great on Friday now it is not working. The only thing that changed was that there was a windos update. When it does work I am unable to update any of the parametes that are linked to Excel file as the update button has disappear.
View 2 Replies
View Related
Feb 20, 2013
I have an iLogic rule that populates the fields shown below in our title block. The DIM. Values are strings set with H,W,L values. This works well, but I have an additional need to sort these values in ascending order, so the smallest value is first followed by the next largest and finally the largest value. (4.000x5.000x14.000). I haven't had much luck finding any information about how this can be done. I did however come across some code here that someone else was using for a similar feature.
Dim sizes As New List (Of Decimal)sizes.Add(bH)sizes.Add(bW)sizes.Add(bL)sizes.Sort()D1 = sizes(1)D2 = sizes(2)D3 = sizes(3)
This is what I have been attempting, though it does not work. I get the following error "Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index". I'm not sure if my list type is correct (Decimal), but no matter what I choose it fails. The (bH,bW,bL) are the actual block dimensions pulled from the .ipt file. Once sorted I want the values of each position (1),(2),(3) to be assigned to (D1),(D2),(D3) so I can place them in my title block in the correct order.
View 3 Replies
View Related
Sep 9, 2012
I'd like to drive the position of workpoints by coordinate values defined in Excel. Inventor allows me to initially create them using values from a linked spreadsheet, however the positions do not change when the spreadsheet is updated. Is there another technique that could do this?
View 1 Replies
View Related
Jan 6, 2011
Is there a way to set the colour of a part using the RGB value? (or perhaps the hexdecimal value?)I know I can set colours in iLogic by specifying an existing colour (ex... iProperties.PartColor = "Green")
I want to avoid adding the colour to Inventor as a custom colour, then referencing it in iLogic... The goal is, if a user specifies the finish on this part to be this colour, it will always be that RGB value (our standard in-house paint colour). I don't want to add it to the Inventor 'colors' design data... when we upgrade to the next version of Inventor, it's one more item we have to remember to carry over!.
View 5 Replies
View Related
Nov 20, 2013
I have a Multi-Value Parameter "MV" that I want to populate using a Named Range from an Excel file that is already populating other parameters for the same file.
I currently have the file working by populating "MV" by using the snippet from iLogic below...
MultiValue.List("MV") = GoExcel.CellValues("filename.xls", "Sheet1", "A2", "A10")
The reason I don't like this method is because if ever that range changes... all the iLogic code will have to be updated as well. How to set a Multi-Value Parameter using a Named Range from an Excel file? I assumed the below snippet would work but I am receiving
"Array was not a one-dimensional array." as an error.
MultiValue.List("MV")=GoExcel.NamedRangeValue("Named_Range_Value")
View 4 Replies
View Related
Oct 29, 2012
Macro for writing the sheetmetal Extents width and length to the custom properties. I need to get these values into the part parameters so that they can be used in the BOM.
I can get this to work if I manually create the "SM_Length" user parameter, but how do I make the iLogic CREATE the parameters if they do not already exist? I think it would be something added below the "Catch..." just cant seem to figure out what it needs to be.
'look for custom iproperty and try to set it
Try
iProperties.Value("Custom", sExtLength)=Round(SheetMetal.FlatExtentsLength, iRoundValue)
Parameter("SM_Length")=Round(SheetMetal.FlatExtentsLength,4)
Catch
' assume error means not found and create it
customPropertySet.Add(Round(SheetMetal.FlatExtentsLength,iRoundValue), sExtLength)
EndTry
View 9 Replies
View Related
Dec 11, 2013
I have been attempting to automate some prompted entry (PE) values using iLogic and the SetPromptResultText command.
The command works on the customer-supplied template I have if I create a new PE called <DELETEME> - my code also works on this new PE even if I delete the "<" & ">" from either end of the string so it becomes "DELETEME".
The command doesn't work on the customer supplied fields of "PURPOSE OF ISSUE" & "PROJECT REF No" but if I add < & > to either end (so they become "<PROJECT REF No>" & "<PURPOSE OF ISSUE>" respectively) and modify my code to look for that instead, lo and behold it works.
why it works with the "<" & ">" on the ends of the string but not without?
My guess is that the "<" & ">" allow the PE to have spaces and without it Inventor 2013 throws the dummy in the dirt and refuses to play nice! - Just tested that theory and it's clearly cobblers.
Here's the sub-routine I wrote (with the working "<" & ">" still in place):
Sub UpdatePromptedEntries(oDoc As DrawingDocument)'assumes the oDoc is activatedDim oPromptEntryDim actSheet As Sheet = ThisApplication.ActiveDocument.ActiveSheet'For Each oSheet In ThisApplication.ActiveDocument.SheetsFor Each oSheet In
[code]........
View 4 Replies
View Related
May 19, 2013
I have one problem in ilogic i developed the model using ilogic rules and dimension values updated through the User interface form.
problem is while entering the values in UI, model updates automatically, but I want to stop automatic update and after entering the all the parameters in the UI then click the done button only update the model.
My UI is like this
It's possible.
View 3 Replies
View Related
May 28, 2013
Is it possible to use iLogic to insert a row into excel?
View 1 Replies
View Related
Sep 3, 2013
I am trying to use an iLogic Excel link to define the hub and bushing dimensions for a wing pulley part file. I get an error: GoExcel: Could not match the column title: "Size". I've attached the part file and Excel file. The iLogic rule in the part file is called Hub_Bushing.
View 9 Replies
View Related
Jan 9, 2014
I am trying to create a new sheet in an existing excel file and can not figure out how to do it.
I am trying to export parts lists from multiple drawings to an exisitng excel spreadsheet and I'd like have each on their own sheet. I can do everything but create a sheet. How to do this in iLogic?
Inventor Pro 2013 (PDS Ultimate)
Vault Pro 2013
Windows 7 64
Xeon 2.4 Ghz 12GB
View 2 Replies
View Related
Jan 7, 2013
I want iLogic to look up todays date in an excel file and then pull information from that row.
The problem I have is that it doesn't seem to like / or - so I am not sure how to format the date.
How would I format my date in Excel so that it matches the wway Inventor stores it in iproperties>Project>Creation Date?
Inventor 2013
DwgNum = iProperties.Value("Custom", "Dwg Number")Client = iProperties.Value("Project", "Vendor")Description = iProperties.Value("Project", "Description")DrawingType = iProperties.Value("Custom", "Drawing Type")author = iProperties.Value("Summary", "Author")Date2 = iProperties.Value("Project", "Creation Date")i =
[Code] .........
View 9 Replies
View Related
Jan 9, 2012
I am currently using iparts/assemblies to model a resistor bank. We have dozens of different configurations and currently each time we need a new one its is re modeled from scratch.
I have created an assembly with all my relevant parts and controlled it through parameters to auto update when key values are changed.
What I would ideally like to do is to either link my two iparts to the iassembly though the excel sheets they use. Currently I have to added each variation to the parts first and then added the parameters to the assembly.
Would it be possible to have a master sheet were all control values are inputted and then each excel sheet for the different parts are linked to this?
As the excel sheets are saved in the temp file and are deleted once you have finished editing I have found it hard to do this so far. Can I change where they are saved? I tried save copy as which created the file but inventor did not link to it.
If this is not possible can I utilize iLogic to input the key values and then write them to a new row in the table. I have created a rule already to limit the number of elements and also the length of the by's (the space between each supporting rod). I have included a zip file with all my parts in it.
View 1 Replies
View Related
May 21, 2013
I want to export reference parameters to an excel table using i-Logic
I found the function GoExcel.CellValues("filename.xls", "Sheet1", "A2", "A10") = MultiValue.List("d0")
It looks like the syntax calls for the file location and name if the xls file is not open and if open is not supposed to be required.
I have entered it both ways and with and with out the target file open and with the function GoExcel.Open("pathFilename.xls","sheet1") and continue to get the error:
we couldn't find C:AbellAbell VaultWorkSpaceDEVELOPMENTAC100-0100MRLTEST Table.xls. Is it possible it was moved, renamed or deleted?
Also, I was expecting that to fill in the sheet cell's would be MultiValue.List("d0","d1","d2")
but the system give me an error that says
Error on Line 3 : Overload resolution failed because no accessible 'List' accepts this number of arguments.
See below
GoExcel.Open("C:AbellAbell VaultWorkSpaceDEVELOPMENTAC100-0100MRLTEST Table.xls", "AC-100-0101003-TEST")GoExcel.CellValues("C:AbellAbell VaultWorkSpaceDEVELOPMENTAC100-0100MRLTEST Table.xls", "AC-100-0101003-TEST", "A2", "A10") = MultiValue.List("d194_A")GoExcel.Save
View 8 Replies
View Related
Jan 28, 2013
I have made a configurator, that defines my part. Now i would like to add some intelligence for the Save process...
When i activate my rule it should.:
1. Go to a Excel spreadsheet and find next Empty cell in a specific collum
2. Place Title from inventor in that empty cell
3. Return the value from the cell next to this cell
3. Use this value as the new filename for my part.
Example: here i would like to get the parts tile put into B3 and A3 (103) returned to Inventor as filename to my part
--------------------
A B C
1 101 Title1
2 102 Title2
3 103
If possible, i would like to be able to adjust this alittle as i go forward in my work,
View 9 Replies
View Related
Dec 12, 2012
I have an ilogic rule to open an existing excel file template and export the inventor parameters into it. I am trying to find a way to then save the excel file as a different filename. This way the original template can stay unmodified. I have found the GoExcel.save command but is there some sort of GoExcel.saveas(filename, filepath) command?
View 2 Replies
View Related
Jun 27, 2011
I am trying to use an iLogic rule to populate iProperties (some generic, some custom) from a part number spreadsheet (containing columns such as PART NUMBER, DESCRIPTION, FINISH etc) and the rule keeps throwing up the following error 'Conversion from string "" to type 'Double' is not valid.'
Here’s part of the code (would be extended for the required custom iproperties but I’m assuming the same principle is ok)
StartRule:
'read excel file
GoExcel.Open("C:DESIGNDocumentsEXCEL FILESPART NUMBERS", "PARTS")
'index row 3 through 10000
For rowPN = 3 To 10000
'find first empty cell in PART NUMBER column (Column A)
If (GoExcel.CellValue("A" & rowPN) = "") Then
[code]...
Changing the format of the excel data (number or text) has no effect. Is manipulation of the format required so that Inventor can read text and numbers to iProperties in this way?
View 5 Replies
View Related
