AutoCAD Inventor :: Create Break-out Views

Jun 22, 2013

I'd like to be able to create break-out views, somewhat like in the picture below.

Is this possible directly in Inventor? That is, without having to carve out elaborate geometry in the parts and assign red color to the jagged edges. 

I can achieve some of what I want in a drawing (Break-out in a view, then making an isometric projected view from that first view with the break-out), but it's still not exactly what I want.

View 1 Replies


ADVERTISEMENT

AutoCAD Inventor :: Sketch To Create A Break Out View In One Type Of Drawing

Sep 9, 2013

I use the same sketch to create a break out view in one type of drawing. I may be blind, but I can't seem to find a way to save that sketch and reuse it when I want to create a break out view.

View 4 Replies View Related

AutoCAD 2013 :: How To Create Multiple Views Of Same Part Separated From Other Base Views

Apr 3, 2013

I am trying to create a second base view (using Layout/Create View/Base from model space). The problem is, I need it to be rotated from the original base view. However, when I rotate the part in model space, ALL of my views change. 

So I guess my question is, how do I create multiple views of the same part that are seperate from the other base views?

View 9 Replies View Related

AutoCAD Inventor :: Create Exploded Views

Jan 27, 2012

I am trying to create an exploded view for the first time in Inventor. In trying to follow these directions from the help file.

First I had to customize my ribbon to add these commands because I cannot find the "Presentations"  tab.

Next when I inserted these commands into a user commands portion, they were greyed out.  I am trying to do this in assembly mode.  I assume that is where it should be done.

View 5 Replies View Related

AutoCAD Inventor :: Create Separate BOM For Different Views?

Feb 24, 2012

Is there any way to create a separate BOM for different views?  I can create a BOM for each but changes in 1 are duplicated in the second.

View 3 Replies View Related

AutoCad :: Use Command To Create Single Break Point

Sep 12, 2011

Autocad2008 has the Break, Break at Point, and Dimension Break tools. There may be other variations of the break command, but I'm not able to fined a way to quickly use any of these commands to create a very simple single break point on a single segmented line at an unequal segment. I'm surprised Break at Point doesn't fit the billet.

Example:
I've drawn vertical line 10 units long. I would like to place a single break point at 7.956 units from either endpointe of that very same line. This is not a polyline. When selected it is depicted as a line with two equal segments.

The purpose of the break is so that I can intersect a horizontal line at 7.956 units located on the vertical line.

It seems to me that with all of the break tools available, one of them should be able to accomplish this simple task on the fly. Even most basic CAD programs such as Draft It, has a break tool that performs this function easily and quickly with one mouse click and one single text box entry.

Also, the fastest way I have found to accomplish this task is to simply draw another vertical line 7.956 units over the original vertical line, and that allows me to attach my horizontal line at 0 or 180 degrees from the vertical 7.956 units. I then go back and delete the second vertical line.

View 9 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Break To Break At Point Command

Mar 19, 2010

Is it possible to change te Break command permanently in the Break at Point command?I never use break, only break at point.

Changing te macro for break ^C^C_break to the macro for break at point ^C^C_break \_f @ doesn't work.

To do it manualy at the command prompt takes to much keyboard entries and mouse clicking.

View 6 Replies View Related

AutoCad :: Create A Layout With Several Views

Apr 18, 2013

I have a model with many items, each needs to be plotted from several views. One option is to create a layout per view, which means a lot of layouts to manage.

Is there another way? Where I can create a layout with several views so that plotting it will create multiple pages?

View 5 Replies View Related

AutoCad :: Create Multiple Views In 3D PDF

Jun 24, 2013

I'm hoping to be able to create 3D PDF to share with my clients. I want to be able to have them see 2D renderings and the 3D model at the same time with different views. Is this even possible?

View 2 Replies View Related

AutoCAD Civil 3D :: Create Multiple Section Views

Nov 5, 2013

When I create multi sect views they plot 3 rows from left to right shown below:

0+00     1+00     2+00

I would like it to plot from bottom to top like shown below

2+00     5+00
1+00     4+00
0+00     3+00

Is there somewhere to adjust the settings?

View 2 Replies View Related

AutoCAD Civil 3D :: Create Sections Views Wizard

Aug 13, 2013

I think that some of the settings does not remain for the next use of create sections views wizard.

In example, placing the tables forgets the last parameters I set , so ..... 

Any trick to have this customized?

Civil 3D (2013) how much you have to improve....

View 3 Replies View Related

AutoCAD Civil 3D :: How To Have / Create Free Frame Views

Sep 5, 2013

I'd like to have a view frame not linked to any aligment, simply a view frame collection. 

The goal is to can create a VF for a cartography purposes or something similar. In example a 10x10 distribution schema.

A trick can be to use a "ghost "aligment , used only to served as environment to create the VF. 

The main problem is the annoying link to aligment. 

I suppose it is impossible to avoid this , isn`t it ? 

Civil 3D (2013)

View 2 Replies View Related

3ds Max :: Create Glass Or Windows That Will Break When Bullet Hits It?

Apr 3, 2011

I want to create an glass or windows that will brake when a bullet hits it. I sow in a tut that the easiest way to achieve that is the nVidia Physx plugin but i dot know or i can't download it from the nVidia Developer site.

I an using Windows 7 ultimate x64 and 3ds MAX 2011 x64

View 7 Replies View Related

AutoCAD Civil 3D :: Create Multiple Section Views From A Corridor

Apr 16, 2012

I am attempting to create section views from a corridor. I have about 80 sections total that I would really like to stack 3 high...then just across the page. Any step by step that make this process easy to understand? 

Right now I get 10 high then across the page (using 'draft' option).  I've tried to make a dwt at a 10 scale, (setting the viewport at 10 scale and viewport as a 'section' in the properties), but when I use that, the sections start overlapping (this is using the 'production' option).

View 1 Replies View Related

AutoCAD Inventor :: Break Association To BOM?

Aug 21, 2013

I'm using Inventor Pro 2011 and I'm trying to break the association of a BOM from it's assembly.  My company uses a "next assembly list" on each drawing to show the quantities and information that appear on the BOM in the next level assembly.  To achieve this we insert a parts list referencing the next level, then we turn off the visiblity of all the parts except the item we want shown.  The problem we've found with this is that we're using some large assemblies and Inventor slows down when it has to reference the large assembly on each drawing.  All we really want to show is the single line.  If we break the link to the large assembly, we feel that it will speed up the process considerably.

View 5 Replies View Related

AutoCAD Inventor :: Dimension Break In Idw?

Dec 21, 2011

How to Create a dimbreak like Autocad in Inventor idw

View 2 Replies View Related

AutoCAD Inventor :: Use Break-out Command In IDW

Feb 15, 2012

Is there anyway to use the break-out command in an IDW to show something inside an enclosure that you normally would not see? I don't mean a section view but an Isometric view that temporarily removes a part of the wall of an enclosure so you can see what is inside, specifically in a presentation view?

View 5 Replies View Related

AutoCAD Civil 3D :: Create Multiple Section Views - Production Mode?

Apr 11, 2013

When creating multiple section views with production as the placement option, all the sections superimpose on top of each other.  Attached graphic. 

I tried to attach the .dwt file used for the multi section view, but the site doesn't allow upload of file extension .dwt. 

View 3 Replies View Related

AutoCAD Civil 3D :: Creating Sheets - Always Have Prompted To Create New Profile Views?

Sep 2, 2013

Every time I create the sheets  C3D ask me to create a profile view ? 

But ... I already have it  .... 

Does C3D ask always for a new one ?

View 8 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Routine To Create Quick Preset Views

Oct 3, 2011

I am looking for a lisp routine that, when activated, asks the user to select the "preset view" (similar to the preset view command found in the ribbon, but instead smaller and quicker), enter name for the view, end.

If possible, perhaps a command, relating to the routine above, that can be placed in the short-cut menu (right-click), which will list the preset views (made by the user), and be selectable.

The approach is instant view change, where it is possible to apply the command, then reapply to go to another view.

if possible, surely there'd be some people that may be interested in this capability.

View 1 Replies View Related

AutoCAD Civil 3D :: Create Sheet Drawing That Has Two Plan Or Profile Views On Same Layout?

May 27, 2013

I would like to create a sheet drawing that has two plan views or two profile views on the same layout?

View 2 Replies View Related

AutoCAD Inventor :: Break Sheet Numbers In IDW?

Jan 17, 2013

I have several sheets w/in a drawing.  Some of the sheets are titled sheet 2A, 2B, etc.  I'd like to be able to do this w/o needing several title blocks.  what becomes sheet 3 is now sheet 5.  How do I offset the sheet numbers?

View 2 Replies View Related

AutoCAD Inventor :: Break Bolted Connection

May 27, 2013

Is it possible to break my bolted connection, so that i can change the information given by inventor in the BOM? Its always grayed out and i can`t seems to find a way to make it "ungrayed".

I could change it directly on the .idw but me and my project leader would like to not go on that road. Our teams are seperated in to two. Ones in charge of modeling & the other is in charge of the presentation. We would like to give, as much as possible, not to much leeway on those in charge of the presentation.  

View 3 Replies View Related

AutoCAD Inventor :: 2012 Break Lines

Mar 24, 2011

Who can tell me if Break lines in Inventor 2012 will be constrainable? I mean come on... All the new fancy stuff Inventor gets every year is great but when will the simple things get done?

View 9 Replies View Related

AutoCAD Inventor :: How To Use Break In Drawing Environment

Jan 11, 2014

I´m drawing a component which does not fit within the drawing sheet. How can I reduce its space on the sheet, while keeping the dimension equal?? I know I can use a Break, but I really can't suceed into using it.

View 9 Replies View Related

AutoCAD Inventor :: Explode / Break A Pattern?

Aug 25, 2009

I have a pattern of iassemblies in an assembly. If I change the member then all instances will change.

is it possible to explode/break a pattern into individual iassemblies?

I think this would be really useful. You can use pattern to layout the assemblies but then break the link to edit them individually. Perhaps to move one slightly, for instance. Or to change a particular member, as I need in this case.

I know that I can suppress specific members and replace with a new member. But this will loose the constraints I have applied to the members of the pattern.

By breaking the pattern there will be no parameters to determine the position of those exploded members, so perhaps they could be automatically grounded until you add new position constraints to them?

View 6 Replies View Related

AutoCAD Inventor :: Break View At An Angle

Jun 25, 2012

Any trick to make create a break view along a sloping edge.So that the view still appears continuous rather that the one.

View 3 Replies View Related

AutoCAD Inventor :: Isolate Areas Of View Break?

Mar 5, 2013

is there any way to control which areas of my part or assembly that I want to use the View Break on? Currently I'm not aware of any options. It wants to break through the entire assembly or part view.

Basically I have a coworker who designs his electrical harnesses in Inventor. Some of the wiring branches off the main harness are longer than others and he would like to break only that specific branch of wiring, not the entire horizontal or vertical area of the view.

Boxx Technologies 4920 Xtreme - Win7 64bit
Intel Core i7 3960X @ 4.5 GHz - 64GB RAM
NVidia Quadro 4000 - Quadro 600 - Tesla C2075 (driver 307.45)
Product Design Suite 2014 (SP1) - Vault 2014 Pro SubRel1 - CFD Sim 2014 - Bunkspeed Pro 2012

View 1 Replies View Related

AutoCAD Inventor :: Controlling Break Size Using ILogic?

Oct 14, 2011

I have an assembly drawing which requires a break in the drawing view due to its height. The drawing view scales accoring to the change in height (so it remains the same physical height on the drawing), however I need to be able to increase/decrease the height (or value) of the break linearly to the height of the assembly.  

I had a look at the ilogic 'break sample' and tried to adapt it to my needs, however, i couldnt get it working. I am using Inventor 2012.

View 4 Replies View Related

AutoCAD Inventor :: Parts List - Break Into 2 Columns?

Aug 9, 2011

Large Assembly / Inventor 2008

I have a layout drawing, and I want to add a parts list, but I want to break it into 2 "columns" rather then a long one

how do I do that?

View 9 Replies View Related

AutoCAD Inventor :: How To Use One Line Break In Same Command On ILogic

Oct 31, 2012

How can I use one "line break" in the same command on iLogic ?

For a simple doubt, a simple sample :
 
MessageBox.Show("Message blabla blablablabla blablablabla", "Title")

In this case, how could i divide the message in 3 lines in the messagebox ?

actually this would work for me in other case too, creating a text with more than one line, instead of creat many text boxes.

IV 2013

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved