I haven't used UCS in awhile and I cant remember what I need to do when I want to rotate the drawing in my paper space.. I typed UCS--> 3 ---> pick my new axis and then the x,y indicator on the bottom left changes to how I want it to be presented but the drawing itself doesnt..
View 5 Replies
Using civil 3D 2012:
I have a storm linetype that looks like this"---STM----------STM----------STM---". The STM text within the linetype is reading upside down since it is placed past the 90°mark (i.e. from 11 o'clock to 5 o'clock).
Tried blocking the line out and rotateing.
Tried grouping the line and rotating.
Tried reverse comand.
Tried joining a line to it to trick it into fliping.
I have blocks inserted in papers pace, the blocks are setup to plan read. All look good, but when I plot they all rotate 90 degree to read portrait, not landscape. This dosn't happen on all drawings. is there a setting for this?
View 2 Replies View RelatedHow do you rotate or move just one or two points in civil 3d? The surveyor used Translate Survey Database and moved all the points, but 4 of them were not included. What is the difference between translate and just the autocad command move and rotate?
View 5 Replies View RelatedHow do I rotate the drawing in viewport?
I want to have my profile and alignment to be in the same orientation on paper space. I have VPROTATEASSOC set to 1. I am not sure if I am using UCS and MVSETUP correctly. All information will work.
My field crew assumed a coordinate system and surveyed a job. I need to rotate the points in my dwg to match another survey. I have not found a rotate points command. Other LDT type commands have been replaced by standard ACAD commands by adding the transparent commands to them. I tried to use the ACAD rotate command and the transparent commands to rotate my points, but there is no transparent command to find multiple points. I need to select the points by point number range if possible.
View 9 Replies View RelatedI am hoping to bring my spot shots labels in at a 45 degree angle. I have created this Desc Key Set. For some reason the points are still coming in like this.
I double checked my label style, it is set to object. I double checked the properties where it shows rotation it says property not set. I also tried to use the rotation set to parameter 1 and assigned the point a parameter 1 at 45 D with no success.
I have a surface. I have a lot of operations done (points adding, breakilines, borders, etc) I want to move and or rotate and change datum.
I have seen old post.
Ok, I have to select the definition data, to transform it and finally rebuild my surface.
I select them and simply move it.
mmm. Something is wrong. Maybe a bug... I have 12 duplicate points (false) , I have missing points, I have a crossed two breaklines.
The data used is very simple, 15 breaklines, 50 points (so there is no reason to think on big data problems...) I have nothing at edit branch.
Is it possible to rotate a survey point symbol, my grips are missing? Civil 3d 2013.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
When plotting sections the headwall storm structures are rotated 90 degrees showing the face of the headwall not the side. How can I rotate the structure in section view.
View 1 Replies View RelatedHow do I rotate only specific parcel labels in Civil 3D? i saw posting for v2004, but no response. I'm guessing parcels haven't changed too much since then..
View 9 Replies View RelatedDrawing started in LDD a few years ago. It was on a local coordinate system of 1000,1000.
The drawing has since been migrated to C3D2012. Now we have data in UTM coordinates that we need to match to the old data. Actually, we want to shift/rotate the entire original set of data to match the new UTM data, so we can continue in UTM for all future data collection.
So, I went through and turned all layers on, Thawed them and unlocked them. I made sure all points were visable, etc. Then I tried to move the original data (I also tried the align command, etc., with the same results) and found a glitch. After I moved the data, I found that there was some points and survey figures as well as a cooridore, that had not moved. The vast majority of the drawing had moved as expected, but the afore mentioned data would not move.
There was a "rotate view" command in the old Eagle point software. How to do that in Civil 3D?
View 3 Replies View RelatedWe would like to be able to rotate line and curve labels in Civil 3D 2010.
Some of our drawings get really crowded and we need to slightly rotate the line or curve labels. This is fine with regular autocad text, but how can we accomplish this with styles and dynamic line/curve labels? I can't seem to find a way to do this with the grips and setting up new styles with specified rotations isn't an option because we need to be able to fine tune and eyeball the rotation of the label to make it look right.
C3D 2012 SP1
Win 7 64 Enterprise
Intel Xeon 3.07 Ghz 8GB Ram
NVIDIA Quadro 4000
In previous versions of Civil 3D there was a grip on the point marker that allowed me to rotate the block used as a point marker, where did this grip go in 2013? How can I rotate an individual point marker without having to create a separate point style?
View 1 Replies View RelatedI have been searching for a way to rotate surface spot elevation labels but have not been able to find a solution to do so. Has this feature been added to 2013 or 14? I do not want to use the point and label styles for my surface elevation, even though these can be rotated. I have several miles of roadway with many horizontal curves and would like the surface labels aligned with and along the centerline. I prefer not to update the spot elevations when the profile is revised.
C3D 2013 (latest updates), 2014 Infrastructure Design Suite
Win 7 Pro, 64-bit
16 GB RAM
i have a simple fence line type with "x"s....if i draw the line straight up or to the right it looks perfect. but if i draw it anywhere to the left then the Xs are off centered.
View 9 Replies View RelatedIs it possible to rotate the point labels when working with point files from an elevation Survey in Ciivil 3D? When activating the labels visibility they are horizontal, but when I rotate the drawing to a side view I am can´t see them.
So far I was working with Autocad (importing a dxf). Is there a way to rotate at the same time all the points labels, wich in this case are just text items?
how to get the little green rotate circle back in C3D 2012 and 2013?
When you click on a point in 2011 (at least my setup), there is a little green circle that pops up that I can click on and rotate the point around. In 2012, I have to click on the point, then right click on it, then select rotate label, only then can I rotate the thing.
C3D - 2014, Sincpac Addon
I am attempting to rotate my Survey database to my platted line bearing. I calculate out the angle of rotation around my section corner (in my case 0.0641) and when I apply the translate survey data, it rotates it at a much larger scal than specified (1.5236). I have also tried by "pick in drawing" to specify rotation without much luck.
View 5 Replies View RelatedCreated L200 Annotative text in C3d drawing w/ SP1, INSTALLED SP2, working in dwg now I can not move, rotate or erase the text that is annotative (the two scale symbols) appear at every piece of text. I tried making in the STYLE text box toggling on and off "Annotative Text" does not work. Also did -purge Regapps, still can not edit text.
View 7 Replies View RelatedI have numerous text objects I want to rotate 180 while retaining each text objects insertion point. There's got to be an easy way to do this.
Long explanation: I created an annotation template to label pipe diameters on an imported shapefile. Everythings good, labels are parallel with lines, except for the fact that some labels are upside down. Is there an expression that would eliminate this? In my annotation template, my rotation expression equals the "angle" field of the object. My "quick and dirty" fix was to burst the annoation labels, and manually rotate necessary text, which wasn't a huge headache since I'm dealing with a relatively small number of labels, but in the future I might have hundreds of upside down labels.
Is there a rotate canvas plugin for cs2 that works like the rotate canvas in sketchbook pro?
View 4 Replies View RelatedI want to arrange views shown in fig for making isometric view. I want to know how to use rotate gizmo.
View 2 Replies View RelatedI have work to do on a bathroom group that is rotated at 18 degrees. How do I rotate my crosshairs to make this easer to work on?
View 4 Replies View RelatedI've got multiple viewports, some need to be orientated as portrait and others need to be landscape.
How can this be done without affecting the other viewports?
Using 2011 Civil3D at the moment. Im trying to insert a PDF as an xref and once its in the model space, it won't let me rotate or scale the image. When clicking on it, the nodes in each corner do not appaear.
View 0 Replies View Relatedwhen you have a 3D-object, with a specific origin, i would like to know how it is positioned in space, X, Y, and Z coordinates, but also A, B, and C (like Tilt, Roll, Pitch), where A is rotation Angle around Z-axis, B around Y-axis, and C around X-axis. I am using this for a kuka robot
i can change the position of the UCS, but don't know how to only rotate the ucs about the Z-axis
'--- Set origin of UCS icon
acUCSTblRec.Origin = Psource(0)
acUCSTblRec.XAxis = Psource(0).GetVectorTo(Psource(1))
acUCSTblRec.YAxis = acUCSTblRec.XAxis.GetPerpendicularVector
How do you rotate the view in Autocad (not just an object - but the whole view)?
View 7 Replies View RelatedI frequently use ROTATE with the reference option, which is a very useful tool. Just wanted to do this again, but instead of the usual 4 point picking process I am asked to "Specify the reference angle" after choosing "reference". Never came across this before.
Did I unintended change some settings? It´s the first time I use ROTATE after reinstalling my AutoCAD a few days ago.
Switches_.dwg
I have a rotate feature set up and I have a tag for the block. When I rotate the block, the text rotates as I have set it up to do but it turns upside down or sideways as the block rotates. I would like the text to stay the same orientation but just move round with the block as the example below.
I want my block to do this.dwg
