I have blocks inserted in papers pace, the blocks are setup to plan read. All look good, but when I plot they all rotate 90 degree to read portrait, not landscape. This dosn't happen on all drawings. is there a setting for this?
View 2 RepliesI am trying to print a tall, thin window, auto-scaled to fit on 11x17 paper using a Windows PC3 driver. I want the image to be essentially 17" tall. No matter what paper orientation I choose in the printer Properties (Portrait or Landscape), the image is rotated automatically the wrong direction. (The print preview shows the paper rotated as Portrait or Landscape correctly, but the image is always rotated to fit the 11" dimension of the paper). I'm using AutoCAD Electrical 2008.
View 3 Replies View RelatedI have a stationing line. I've used the block PTTICL to make ticks. The ticks display perfectly. I'll run through a plot preview and the ticks show on the plot preview. I push plot go to the printer and the ticks are not plotted.
I've checked the layer. They are on a layer that should print.
I've checked the block. The block is created on a layer that should print.
I've run through a number of options regarding the alignment label properties and found "display" to be equal to "true."
Everything else plots just fine. Only the station label ticks refuse to plot. My project is fairly short so the work around was to put a poly line right on top of the tick mark.
AutoCAD Civil 3D 2013.
Switches_.dwg
I have a rotate feature set up and I have a tag for the block. When I rotate the block, the text rotates as I have set it up to do but it turns upside down or sideways as the block rotates. I would like the text to stay the same orientation but just move round with the block as the example below.
I want my block to do this.dwg
here is my jig rotate code
Protected Overrides Function Sampler(ByVal prompts As JigPrompts) As SamplerStatus Dim myPPR As PromptPointResult myPPR = prompts.AcquirePoint(myOpts) Dim curPos As Point3d curPos = myPPR.Value If curPos.IsEqualTo(BasePt) Then Return SamplerStatus.NoChange Else myMatrix = Geometry.Matrix3d.Displacement( _ BasePt.GetVectorTo(myPPR.Value)) Dim pt1 As New Point2d(BasePt.X, BasePt.Y) Dim pt2 As New Point2d(myPPR.Value.X, myPPR.Value.Y) BaseRo = pt1.GetVectorTo(pt2).Angle End If Return SamplerStatus.OK End If End Function Protected Overrides Function Update() As Boolean myBRef.Rotation = BaseRo Return False End Function
I always rotate the block with bottom left point as fixed point. What can I do to make the block rotate around another point? such as centre point of the block?
How I rotate a block but set the text to stay readable.
At the moment I have a 600x600 light fitting with a Tag inside for typing the letter of the fitting. E.G. Type A, B, C
I have a rotate function also so I can rotate the fitting to the orientation of the room.
But when I rotate the fitting the text rotates also, therefore if I turn the fitting round 90 degrees the text is on its side. How do I rotate the block but leave the text orientation the correct way?
I have a simple block, I would like to do the following:
Type: Insert
Specify: Block Name
Click spot with cursor to have the block placed
Rotate the block for orientation
I know that if I use the Tool Pallets I can specify rotate on insert, but do not always want to use the Pallete. I also know I can assign a rotation parameter to the block so I can grip and rotate after insertion. Is there an easier way?
I am attaching a rotate parameter and action to a dynamic block.
I get the "Specify base point" bit okay but I can't figure out what "Specify radius of parameter" does.
Do I have to include or exclude other parameters like Flip or Stretch? I get some weird results when I rotate an object with other parameters.
Is it possible to place the Grip in a specific place? It always seems to like to sit on top of another parameter name.
Have a number of std blocks with a single part number located centrally within a circle similar to std grid line coordinates used on architectural plans.
Is there a simple way to set the block up with its part number fixed centrally so that when the block is inserted at different rotation angles the part number always appears central within the circle and upright.
Forget lisp as only have LT.how to centralise the text within an attribute so its always central when block is rotated.
I'm trying to get a dynamic block to rotate the attached attributes from a left justification in the vertical position to a center justification in the horizontal position. I managed to do this with 2 Visibility States, but anyway to do this with only the one set of attributes. I'm using AutoCAD 2012.
View 2 Replies View RelatedIs it any option to keep text righ-reading even if block is rotated (by AutoCAD command ROTATE, not dynamic action)?
View 9 Replies View RelatedI want my north arrow to come in at 90 (pointing up). Then I want 3 grips that you click to either rotate it to 0,180,or 270.
View 8 Replies View RelatedIs it possible to make a dynamical block where the attribute is horizontal in combination of the alignment parameter (not rotate)? If I align to an arc the attribute need to stay at an horizontal position.
View 4 Replies View RelatedI am trying to have a dynamic block that will show the profile of a steel plate, detailing the angle of a bevel. Including the plate thickness, the land, gap and the actual angle of the bevel. I've gotten most of it figured out, but having a grip to SET the angle at a specific number, while maintaining the drawing's integrity is proving difficult. I have attached the block I have created so far (minus the previous attempts to rotate the beveled angle).
BVL_detail.dwg
The base point of the rotate parameter should be at the junction of the bevel & land. I need it to stay connected to the end point of the top-most flat line as it rotates, which means the lines need to stretch to match the changing angle. It will either rotate that line along with it, or if I apply a stretch tool, it gets all disconnected and just plain wrong.
One of the things I am liking about my current set up is I can grab a grip, and then type the number I need and it will pop on into place. Was hoping for the same effect if I typed in the angle, it would be exactly that, while also adjusting the drawing.
I have a block of a circle and a line coming from the left and right side quadrant of the circle to a common point (see pic). I want to create a dynamic block using a Stretch and Rotate parameter. You select the block, the Rotate point (grip) shows at the end of the two lines. I can grab that grip and rotate both lines and circle by moving this point around the screen, but cannot Stretch this point to a new location at the same time. How can I have the Rotation end point follow the Stretch parameter?
View 2 Replies View RelatedI'm inserting blocks with lisp using the following code.
(defun C:test()(setq MYPOINT (getpoint "
Select an insertion point"));(command "_-xref" "attach" "C:/ICT/GEBERIT/XREFS/650-270-00-1.dwg" "_Scale" "1" MYPOINT)(command "insert" "C:/ICT/GEBERIT/XREFS/650-270-00-1.dwg" MYPOINT "" ""))
The lisp however only allows me to rotate in the x-y plane but I also want to rotate it in the z-axis hoe can I do this?
I also tryed to combine a 3d rotate to the code, as follows but to no success...
(defun C:test() (setq MYPOINT (getpoint "
Select an insertion point"));(command "_-xref" "attach" "C:/ICT/GEBERIT/XREFS/650-270-00-1.dwg" "_Scale" "1" MYPOINT)(command "insert" "C:/ICT/GEBERIT/XREFS/650-270-00-1.dwg" MYPOINT "" "");Rotates the item in the z axis...(setq MYANGLE (getstring "
Specify rotation angle for the Z-axis "))(command "_Rotate3D "_x" "LAST" "" "last" MYANGLE ))
I have the below code (from a user here on the forum) which works great for aligning text, mtext and blocks to 2 points. For annotative entities, it respects the rotation angle for mtext and text.
ie I have an mtext object at 1"=20' scale and at 1"=40' scale. I run the command when the current annotative scale is 1"=40'. The object at 40' scale has changed, but the 20' scale is unchanged. This is working as I would like it to.
But for annotative blocks, it gets weirded out. In the above example, the block at 40' will rotate, but so will the attributes at 20' scale. But linework and hatching at 20' scale will be unchanged. it looks really weird. how to get it to play nice with blocks. Ideally, I'd like the block to be at different rotation angles in different annotative scales.
(defun C:R2P (/ ss ang edata); = Rotate objects to align with 2 Points (setq ss (ssget '((0 . "*TEXT,INSERT"))) ang (angle (getpoint "
First alignment point: ") (getpoint "
Second alignment point: ")) ) (repeat (sslength ss) (setq edata (entget (ssname ss 0))) (entmod (subst (cons 50 ang) (assoc 50 edata) edata)) (ssdel (ssname ss 0) ss) ))
I found a program which rotates selected block(s) about thier insertion point. I modified it to rotate each of the block(s) about the y-axis. Works great. Now, I would like to change it so that it rotates a copy of each block about the y-axis and leaves the origial block in place. Its kind of like the mirror command exept it is rotating the new block(s) to the other side instead of flipping them. I want to keep all or the parameters of the block(s) the same as each original. I am using AutoCAD 2010. MOCORO is not recognized as a command. The new features workshop says to use the new command AMCOPYRM, which is not recognized either. Go figure.
(defun RotateDuplication (/ CN ENT theObjects SS)
(vl-load-com)
(setq SS (ssget (list (cons 0 "INSERT"))))
(repeat (setq CN (sslength SS))
(setq CN (1- CN)
ENT (ssname SS CN)
[Code] ......
i used autocad 2010 and when i create a new block and rotate in that block text hhave been changed by cad.
is there any option to create block and never changed text when did mirror or rotate.
I have a block that I would like make dynamic. It is a fishhook arrow for a roundabout traffic sign. I would like to rotate the head to various angles, and have the body of the arrow adjust. I already have the ability to stretch the two end points in their direction, and rotate the head, but the curved part of the arrow body needs to adjust for the new head location. I tried dynamic stretch, but it would not attach to the rotate dimension. How do I get these arcs to stretch along their radii and associate the end arc points to the near end of arrow head?
I had one thought of using multipe arcs so that they would overlap more or less as rotated, but this is a pretty crude workaround.
LT, C3D 2005 - 2014
XP, Vista, 7
I Xreffed my Profile Border (title block) into paper space then xreffed my profile.dwg into the model space. When I plot, the gridlines from the border plot on top of the profile lines. Is there way to change the plot order of the Xref files?
View 4 Replies View RelatedI created a drawing in model space about 75' x 75'. Then created a title block drawing in paper space. Now would like to mesh the two so I can plot the drawing with title block. When I insert the title block drawing it is so tiny it can't be seen. What am I doing wrong?
View 3 Replies View RelatedI am trying to get an image within the area of a title block to appear on a plot. However, it will not plot when the drawing is plotted. The raster file is contain within the border when it is placed on the Paper Space and is recognized as a Raster Image when selected within the Paper Space. Why it will not appear on my plot. I am new to this version of AutoCAD 2012 and used Version 2000 previously but not for a couple of years.
View 9 Replies View RelatedWhen I'm batch plotting several drawings, I'm trying to add a block from a page setup to each print.
View 4 Replies View RelatedMany times when I receive a drawing from an architect, when I go into the layout tab the titleblock info/XREF doesn't line up with the page layout. I would assume it lined up when the architect sent it to me in his software. For years the solution I use is to XREF the architects PDF in the layout and then go to print and change the Print Offset till it looked right in the print preview. Then I would apply it to the layout. I would then take the offsets and apply it to every sheet. This is a very time consuming process and was wondering if there is a better way to make this work and still keep the scales. I was also wondering if there was a way to move and align the layout on the fly in the paperspace.
View 3 Replies View RelatedI'd like to batch plot 50 drawings, all of which have the same title block in the same position. This is easy with the PUBLISH command, but I'd like to be able to add a "stamp" of the customer logo to these drawings, which I have as a block in a separate file. Basically I want to easily be able to plot the same drawings for different customers, the only difference being the customer logo. Is this possible?
View 1 Replies View RelatedI would like to :
-select an attribute block in my layout viewports
- select a directory where the PDF will be saved
- select the printer
and zoo.
All my layouts will be printed. The files will be created. The filename will be the attribute name (different in each layout viexports).
[ACAD2011 CIVIL3d]
I've seen in previous thread's how to add a company logo to your title block/plot frame using a jpg file. Plus i've set the image parameters to 0 to remove the line around the image that appears. I've also set the transparency to "ON" - not sure if this is correct but did it anyway - i think.
My problem is that when I come to print it off - the logo appears with a slight background (very faint grey) when it should be just white. The logo is made up of black and red shapes with black text on a white background.
We're using C3D 2013 SP2. The survey company we use uses point styles to show the blocks. Say they shoot a catchbasin. Instead of inserting the block, the point shows up as the block.
I did a field check & needed to insert a missed CB. When I inserted the block, the other points that were CBs disappeared. I had to insert the block, copy it the clipboard, undo the insertion & then paste the block in. It did this on other drawings & other blocks.
I have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
Is there a way to create a block with attributtes that automatically complete x, y, z, lat, long for the insertion point of the block?
I am trying to complete text in paperspace that will automatically fill in the lat long of a point in model space without using a table. I have tried field insertion with reference to a cogo point, but it doesn't give options for position on a cogo point. If I pick a block with attributes, it will let me pick any attributes, and x,y position for the block.
Cogo points show all the information I need to propagate in the properties....but how do I get that to translate into the text using fields or some other method?
Dell Precision T3600 - Windows 7 64-bit
NVIDIA Quadro 600
Intel(R) Xenon(R) CPU E5-1607 0 @ 3.00GHz 3.00GHz
8 GB ram - Two 1TB raid