AutoCAD Civil 3D :: Publisher Doesn't Display
Mar 11, 2013
My drawings contain active linework, civil 3D data (contours, etc.), and references.When a plot is executed without the publisher - everything appears normal. Specifically, all contours appear on plots and PDFs.
However, when plotting using the AutoCAD publisher (to batch many plots together, 70 or so plan sheets in 4 drawings) some Civil 3D data does not appear. Most contours are shown - however contours from a specific surface (existing ground surface) do not appear.
The publisher result is the same whether using a PDF driver or physical plot driver - these contours do not appear.
The style used to display the existing contours is used on other surfaces within the plot set - and oddly these contours appear on the publisher plot. However, no contours from this specific existing ground surface will display using the PUBLISHER.
Are there alternative ways to batch plot a set of drawings that I can explore without further cost?
View 9 Replies
ADVERTISEMENT
May 3, 2013
So, I finally got a 3d solid part published with the one attachement point (autodeskconnectionpoint). Looks great in object viewer with a pipe connected to it. However, put it in profile, and my 8' tall item shows like 1.5ft tall.
content file available, though this won't let me attach it?
View 3 Replies
View Related
Sep 25, 2012
Everytime i press the shift key and quotation mark key for the double quotation mark to display on my text on PS cs5 doesn't work. It display a double arrow instead.
View 4 Replies
View Related
Dec 21, 2012
I have and array that looks fine in model space but when viewed in a viewport from paperspace, sections of the array look like they are wiped out. Going back to model space everything looks fine. The only way I can get it to fill in is to delete the viewport and create another one. It's then fine for awhile but before long, areas are missing again. I've redone the viewport three times and it's starting to drive me nuts.
View 5 Replies
View Related
Jun 22, 2012
When I switch from 2D top view to an isometric view my cursor disappears. This is a completely new drawing file so maybe something is not set right.
View 3 Replies
View Related
Aug 13, 2013
attached is an image of an assembly, i placed a part in the assembly and only half of the part is displayed.
View 2 Replies
View Related
Apr 8, 2013
My properties palette doesn't have a field for linetype? I swear there was one there previously (under the general section)?
View 4 Replies
View Related
Apr 17, 2012
I am currently running Inventor 2009 64-bit SP2 and periodically (and only recently), I have had the problem of my keyboard keys not displaying what I am typing. This is only affecting Inventor and no other program to my knowledge. To make matters worse, it happens absolutely randomly. In fact, it happened just 4 minutes ago, which prompted this post! I was typing some words out and in the middle of the word, it changed what the inputted keys were. To give an example, the letter P comes in as L. The letter S, comes in as the letter G. The letter M comes in as semicolon. Catch my drift? At first I thought it changed to a Dvorak key setting, but even if that were the case (which it is not), why would it do it randomly?
View 2 Replies
View Related
Jun 21, 2012
We have some custom macro's running in Inventor wich we call from the ribbon > user commands.
In Inventor 2011 we used the large and small together and the icon's were shown properly.
Now we have moved to Inventor 2013 and the large icon's arnen't shown properly. They display as an large orange @ signin a square box.
The Icon's meet al the requirement, .bpm, 16x16 & 32x32 pix, 24 bit, naming (Modulename.Macronam.Small/Large.bmp)
View 9 Replies
View Related
Jan 20, 2013
How i can use Publisher for plotting a window .I don't can use the plotting system. (I have many paper size and rotation so i have error eInvalidPlot)
So i have to use PDFCreator and plot a window after another.I have check the DSD.. but i don't see the choose of window (see only filenam or layout)(I can create a view for my plot). Any example for demonstrate the system of publisher ?
View 4 Replies
View Related
Sep 14, 2013
I just installed a student version of Inventor Pro on my comptuer. I have used this and several other similar software packages before. My problem: when I open a new part file, it takes me to a gray screen. No coordinate axes, view cube, nothing. When I click "Create 2D Sketch," still nothing. Same gray screen. If I draw a line, it doesn't show anything.
I've gone to View -> Object Visibility, and everything seems to be checked off as it should be. I've also clicked User Interface, and it shows the View Cube among other things as being selected.
The software didn't prompt me for an activation key, not sure if that may be relevant to the problem?
View 6 Replies
View Related
Nov 15, 2011
My supervisor needs to view the autodesk inventor designs (I create) in his PC without installing the whole inventor package. Its something like using eDrawings to view designs created with solidworks.
View 3 Replies
View Related
May 3, 2011
i have proceded as i ve done for years to activate the product, when it cames to the level where i should usually put my information it dosn't display, reinstalled it for several times and taking care of delliting all the stuff that goes under App data, common files where autodesk shered in which the LMU reponsebal is located and nothing happended after reinstalling.
View 1 Replies
View Related
Sep 11, 2012
I have created a model on autocad which I have imported into autodesk inventor publisher...for my project I have to simulate an object's assembly and subsequent dissassembly. But to begin with my model is assembled so i have exploded it and now I want to put it back together - however I can't get the program to remember the position each component was originally in so when i try and move each component back it's all over the place and looks awful. Is there a way to mark an object's intial location so that i can move it back to exactly that place?
View 4 Replies
View Related
Oct 25, 2012
I've been using Lightroom 4 since just a few weeks after it came out and been happy with it. My Canon T3i was new to Raw, but I haven't had any issues importing and images looked as I expected the output to be before editing. I have a preset of my standard settings that I apply during import.
I upgraded to 4.2 this week and I took some light painting shots and when I imported 40+ RAW images, I watched one that I really liked in the preview change from what I expected, to a much darker and overly blue image. I thought at first this was due to my preset so I zereoed out the image but it still didn't look the same as the RAW outside of Lightroom. I deleted the picture from the library and added it again and saw before importing it was lighter and had the colors I expected and after importing it changed to overly blue with really bright spots in it.
I uploaded the RAW converted to JPG using Windows Live Gallery, which shows it as the camera preview showed it, and again after letting lightroom export to a JPG with no image adjustements that I know of URL....
Other pictures from this same shoot but of a green light look as I expect.I do have a Spyder 3 for monitor calibration in case there might be a profile issue.I imported the JPG I created outside of Lightroom and it looks better. If I drag the Black slider to -100 I get a similar look to what Lightroom did when I imported the RAW, although the slider then it positioned at 0.
View 2 Replies
View Related
May 2, 2013
when i type, this is what appears.
[URL]
View 4 Replies
View Related
Aug 18, 2013
I just built this brand new computer and everytime I open up Photoshop CC it first promps me with a message that 3d features require a minimum of 512mb of vRam and it has detected less on my system. I then go into Edit>Preference>Performance and under Graphics Processor Settings it says that it is Unable to detect information and that photoshop has detected an error in my display driver.
This is a brand new computer the specs are:
Windows 8 Pro - 64bit
Intel Core i5-3570k CPU @ 3.40GHz
Ram: 16 GB
Graphics: AMD Radeon HD 7700 Series
I updated my graphics driver via the Radeon site and it is version: 12.104-130328a-159787C-ATI.
I even rolled back to previous versions of my display driver and still nothing. I also tried out CS6 and CS5 and I still have the same problems.
Also here is the system info via photoshop:
Adobe Photoshop Version: 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00) x64
Operating System: Windows 8 64-bit
Version: 6.2
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 4
Processor speed: 3400 MHz
Built-in memory: 16268 MB
Free memory: 13062 MB
[code]....
View 2 Replies
View Related
Nov 16, 2012
My "infinite light" tool does not display when I select "infinite light" in my 3D layers panel. It's the tool that rotates so you can easily adjust the light in the image. I'm guessing I've done something with my settings.
View 2 Replies
View Related
Sep 7, 2011
We have a Revit Ar 2011 project that is well along in the modeling process and we have noticed that recently elevation symbols do not display on the cursor while placing. Once the elevation tag has been placed it displays normally. Basically, you are operating somewhat blind until the item is placed. Then you can see it in order to modify the orientation and such.
View 1 Replies
View Related
Dec 5, 2013
Have a fairly simple banner ad created in Mac OS. Previews fine locally. Previews fine in Safari on Mac as standalone file and dropped in to iframe on Wordpress page (just like a Nivo slider on same page. Also previews in Safari using IE user agent string. When viewed in any browser on Windows OS, no animation display; either as standalone or loaded into iframe. Possibly something simple: a CSS visbility? URL....
View 3 Replies
View Related
Dec 10, 2003
Hello all, i got a real bad problem with GIF saving in Photoshop : everytime i am saving a GIF file and then i import it in Publisher, i get an ugly white border around the object even though the object is perfectly cut using the pen tool.And i used every kind of settings available but no noticeable change.Also when i save in PNG the border gets a little smaller but it's still here.
So my question would be where does that come from, if it comes from photoshop then could you give me soome tips to get rif of it? Or is it just my publisher doc/impression settings?
View 4 Replies
View Related
Jan 1, 2014
I've downloaded some new watermarks to my computer (into word) and they will display in my watermark editor in Lightroom 4. However, when I use those downloaded type styles, the copyright symbol displays in the bar below but does not display on my photo. I've also used alt0169 but it still isn't visible on my images.
View 2 Replies
View Related
Apr 9, 2011
It appears various people are posting things that are posted in the Readme. For Nitrous these are:
• To prevent issues with Nitrous, ensure you have the most up‐to‐date system drivers. For specific details, see the sections about 3ds Max 2012 / 3ds Max Design 2012 found at URL....
• Applying Unwrap UVW after painting in 2D with Viewport Canvas and painting on top of the Unwrap UVW can sometimes cause 2D paint to fail.
Workaround: If this occurs, apply an Edit Poly modifier on top of the Unwrap UVW modifier.
• Civil View parameters can cause a program error when modifying surface parameters.
• Object Color display will show the object’s material color when set to object color.
Workaround: Enable Use Environment Background and Display Background in the Viewport Background settings (Alt+B).
• Locking the computer can cause the viewports to stop responding in some cases.
Workaround: If this occurs, restart the program.
• Mirrored or negatively scaled objects might display face edges incorrectly.
• The Soft selection Shade Face Toggle does not always properly display the shaded faces.
• MassFX constraints can cause Dummy objects not to display in Realistic mode.
• Body Objects display tessellated/triangulated edges instead of the proper Body curves.
• Back faces display as transparent.
• Hidden Line style does not display texture maps in the viewport.
• Tone Mapper used with a Skylight set to use the mr Physical Sky environment will display a black background when enabled.
• Enable Gamma/LUT Correction does not work on stylized viewports.
• Very large textures (10K x 10K) can cause a program error. Workaround: You can control texture sizes with MAXScript:
NitrousGraphicsManager.SetTextureSizeLimit 512 true
NitrousGraphicsManager.SetBackgroundTextureSizeLimit 1024 true
Or by modifying the following keys in 3dsmax.ini:
ViewportTextureSizeLimitEnabled=1
ViewportTextureSizeLimit=512
ViewportBackgroundTextureSizeLimitEnabled=1
You need to restart 3ds Max after making these changes.-Eric
View 2 Replies
View Related
Apr 10, 2013
Any singulat anchor points dont't display in outline mode until they will select. In previos versions they displayed as cross. How to fix it?
View 6 Replies
View Related
Jul 30, 2013
I am an artist and have been asked to create 11 color drawings for a book. I created the drawings and scanned them to my iMac OS 10.8. I used cs4 to correct the color and crop the images. I saved the images in CMYK fomat and emailed them to the publisher. The publisher received the, is able to open the images and when they try to make any changes to the images they are not able to save the changes. I did make the images read and write, so they aren't protected.
My question is why are they not able to save the cropping changes they require?
View 8 Replies
View Related
May 17, 2012
Need to change the .ai file to something they can use in MS Publisher so they can still edit it.
I have tried everything and searched everything trough.. Can't figure out how to do it, or if it is even possible?
They wrote me this:
Normally when saving a program you also have the choice to import or export to a different document type, saving the original formats.
I need you to try and export the adobe files to MS Publisher format. We do not want to buy Adobe Illustrator. We do not want it used for creaing designs, logos etc as we need to be able to make changes at any time. PLease try exporting to MS Publisher.
Exporting the document should allow us to keep layout and formats without having to convert to eps and then import through an add on filter.
I would like the brochure and all art work done to date saved in this format.
View 3 Replies
View Related
Mar 15, 2014
How do I convert my Publisher newsletter into an In-Design file?
View 2 Replies
View Related
Apr 8, 2014
How do you open a Microsoft Publisher (.pub) file using inDesign?
View 3 Replies
View Related
Mar 26, 2014
While working in Lightroom today when I scroll down on the left side panel in grid view in the Library module the last item is Collections and the Publisher box is no longer there?
View 1 Replies
View Related
Jul 1, 2013
The undefined areas of a slope map now have a hatch to them and are plotting black. This map was created a month ago in 2012 without issues, upgraded to 2014 and now the undefined range has hatch!
View 8 Replies
View Related
Sep 13, 2011
Many times when I try to attach a xref and do a zoom extents, I cannot find the drawing. I change my limits to -999999,-999999 and 999999,999999 but still nothing. This seems to be a random problem.
Windows 7 x 64
Nvidia GeForce GTS 450
8 GB Ram
Intel Core i5-2310 @ 2.90 GHz
v. F.107.0.0 AutoCAD Civil 3D 2012 SP1
View 7 Replies
View Related
