AutoCAD Civil 3D :: Autosnap Settings Are Not Be Saved In Environment
Oct 1, 2008
I am experiencing a problem where my Autosnap Settings (system variable "autosnap") are not be saved in my Civil 3D session. When I open Civil 3D 09 (SP1), my autosnap variable gets set to some weird number (aka 6768 or -12566). Each time I get into the drawing I need to reset this to 55, or go into my Options-Drafting-Autosnap Settings and toggle on Marker, Magnet, and Display Autosnap tooltip. This is a system variable and should be retained upon entering a drawing file.
View 7 Replies
ADVERTISEMENT
May 17, 2013
I have a point cloud that i want to snap a boundry around its outer limit. Is there some way to do this automaticly? I tried creating a surface and using the maximum triangle length to get a good boundry. For some reason i loose a lot of pionts at the edges with this boundry. I have removed points that represents water so i have a part in the midddle that i want a boundry around.
View 3 Replies
View Related
May 7, 2013
ACCAD LT 2013
Kept getting a nag screen that updates were available for Autodesk 360.
I logged in and updated it. The update required a restart of LT. When it restarted my saved workspace was gone, replaced by the AutoCAD LT Classic.
When I click the down arrows beside the Workspace Control box my saved one isn't listed.
Where did the saved one go? What's going on here? Why are updates messing stuff up?
View 6 Replies
View Related
Aug 6, 2012
I am using AutoCAD Civil 3D 2012
The marker box that usually shows when you want to snap to an object is not appearing. What do I need to try to get it to show up again?
View 3 Replies
View Related
Sep 2, 2013
My autosnap marker is not working in AutoCAD 2010 Mechanical. My settings in below.
View 8 Replies
View Related
Sep 15, 2012
Sometimes when I am dimensioning an object, my autosnap will pick up the end of an adjacent dimension extension line instead of the end of the object. Is there a way to prevent that?
View 4 Replies
View Related
Sep 30, 2011
PSP X4 does not save the last crop settings which I used. In older versions the program saved the last used settings (dimension of the crop frame in pixel) and this was a good thing. Now in version X4 this does not work anymore. Is there a setting to switch that on or is it a bug?
View 2 Replies
View Related
Aug 18, 2008
I have a bunch of different Crop Tool settings. I use Preset Manager to sort them into a logical order. If I exit & restart PShop (CS3) they are back in the order in which they were created. How do I ensure that the preset preferences are restored between sessions?
View 4 Replies
View Related
May 25, 2012
I recently upgraded my laptops to Fedora 17 and Linux Mint 13, which now come with Gimp 2.8. After discovering that Save and Save as are moved to Export to and Export, I tried saving the default export settings for JPG. I usually set the Quality to 80 and make some other adjustments. However, the defaults always revert back no matter how many times I press the Save Defaults button.
Also, is there any way to make Gimp always use the previously selected settings? It seems that even though I set the defaults, with some images I open, edit and attempt to export, it tries to adjust the quality settings again. I just want to always have the defaults I have set for exporting jpg files without having to click an extra button or keyboard shortcut every time I save a file.
View 4 Replies
View Related
Feb 17, 2014
I have previously imported some raw (.raf) files into Lightroom and done my adjustments - i then saved as jpegs and took all files out of the lightroom dashboard.
I now want to go back into a raw (.raf) file that I have re-imported into Lightroom, and apply the same settings that I did previously to the jpegs before.
Obviously, on re-importing the raw files, they have reverted to the original settings and not the jpeg settings that I saved at.
View 6 Replies
View Related
Feb 7, 2013
I want to record an action which creates an graduation layer and uses the "auto" function layer in the layer settings. But this adjustment will not be saved in the action (up to CS 5.5 this was no problem).Is this possible in CS6, too?
View 2 Replies
View Related
Mar 31, 2011
CorelDraw X4 sp4 w/ hotfix
Why is it that when in Draw save the tone curve settings it saves in a totally different directory? Then if I want to open that settings file it takes me somewhere else showing default styles/settings (*.crv)?
View 3 Replies
View Related
Oct 25, 2013
Any way to stop autodesk 360 from creating a new drive path on my computer when I save drawings from Autocad Civil 3d. I am using Civil 3d 2013. This only occurs when I save files from Civil 3d. The files are being saved onto a separate server from the computer.
View 1 Replies
View Related
Nov 13, 2012
I´m trying export to dwg, and I can see all the process, but the export file is not saved.
I´m using the Autocad Civil 3D 2013 and this just happens in one specific file.
View 9 Replies
View Related
Mar 12, 2013
Alright, I'm not actually trying to do customization, I have a client that cannot save his drawing and have be in a "Saved" state. When creating a data shortcut, after saving the file (and doing nothing else, I watched), he is unable to create the shortcut because the drawing needs to be saved. Another example, when doing an e-transmit it tells him that the drawing hasn't been saved and if he wants to save the file. He clicks YES and then it tells him the drawing hasn't been saved and asks him if he wants to save it.
It seems to be isolated to this file. If he works in a different file, it works just fine. Also, I had him send me the files (via e-transmit) and I was not able to replicate the problem so, it seems to have something to do with this particular file on his system.
My question then is, can something be embedded into the file that will cause something to happen directly after a save (like a reactor)?He's using Civil 3D 2012 but I don't think it's anything directly related to Civil 3D.
View 4 Replies
View Related
Jul 10, 2013
I keep getting a message that "folders and files cannot be saved when AutoDesk 360 is not running. Start AutoDesk 360 and try again"
I look up on my menu bar and notice: Aguirre64 (my AutoDesk User ID) is on. WHy do I get the message when I am clearly logged on?
View 1 Replies
View Related
Nov 19, 2012
C3D2012 SP2.1
What I have is a nice production drawing, that has NEVER even been opened in C3D2013. I JUST finished adding labels for some new pipes and structures that are in an Xref. I saved the drawing and closed it to work on a different project while plotting. In SSM, I select the sheets to Publish, the first 4 plot without issue, then I get a CER without a Fatal Error...I can still work on the nbow current drawing...it appears that SSM crashed while loading the aforementioned sheet I had been working on.I close everything down, restart C3D2012, open the same drawing I had just labeled, says it needs to be recovered, so I let it finish loading (I've found that stopping the load will almost always cause C3D to hang indefinitely), close that drawing, then run recover, finds 2 errors, allow to fix, am greeted with the message box "This drawing has been saved by a newer version of C3D. All C3D commands are disabled in this drawing."
Wait a dang minute, SSM crashes and somehow (the save time is still the same as when i manually saved it in 2012) saves it as a C3D2013 file...even though it is still opening as a 2010dwg format file? Opening the file in Notepad even shows it was last saved in 2012.
View 6 Replies
View Related
Jul 15, 2013
I'm trying to customise my drawing templates to keep them up to date and also include accountability.I seem to be having trouble in including the name of the person who has last saved the model, and the date the model was last saved.
Manually including this information isn't ideal as people will forget, and it makes it harder to trace revisions.I can't see anywhere on the iProperties where the 'Last saved by' feature is available, but I thought maybe the information could be pulled from the username from the application options?
The last saved date should be easy, as there is a modified date in the model's iproperties; however, I cannot pull this information.I have used other cad packages in the past and this was never an issue. With all the customisation of Inventor, I thought this would be relatively straight forward.
View 3 Replies
View Related
May 13, 2010
Occasionally I get the following message when trying to add data shortcuts.
"The drawing has not been saved yet, please save the drawing before creating data shortcuts" Only I have saved, this still occurs after either a full or quick save.
Shutdown Civil and reopen still gives the same message..The problem seems to be when you are saving to any other version of Autocad than R2010. Save as R2010 and it works.Mike Evans
Civil3D 2013 / 2014 British UK
Windows 7 Professional 64-bit
Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz (8 CPUs), ~4.0GHz With 32768MB RAM, AMD FirePro V4900, Dedicated Memory: 984 MB, Shared Memory: 814 MB
View 9 Replies
View Related
Nov 14, 2013
We've recently upgraded a large project from Civil 3D 2012 to Civil 3D 2014 and for the most part things have migrated well.
On this project as well as others that have been migrated, I've been noticing this and similar messages re: modified in a previous version when the dref's synchronize:
"FG-STREET A was modified in a previous version of the software. Changes in the current were overwritten when the data reference was synchronized."
The steps we used for converting this project in order are:
Set Data shortcuts working folder.
Migrate Survey Database.
Open/save base drawing containing survey & EG surface.
Open/save all C3d source dwgs before opening any plan sheets.
Open/save all C3d plan sheets.
Because of the warning message I thought I'd try the "Migrating Data Shortcuts" following the instructions.
Use the stand-alone Data Shortcuts Editor to save one or more data shortcuts to a specified folder. If the shortcuts were created with a previous version of AutoCAD Civil 3D, they will be updated to the current format in this process.
When following the steps in the Data Shortcuts Editor, when I get to step 5, select the folder & choose Saveas, I see the following message that they will be saved in 2009 format?
Isn't that a downgrade? How these modified in a previous version messages?
I'm still trying to figure out if they are a benign message or if they are something I should be concerned with. 95% of the shortcuts on the project sync normally & seem to work fine other than an occasional disappearing profile in the sheet profiles.
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
View 7 Replies
View Related
May 5, 2012
For some reason in my base template for field work the "Disable Description Keys" option in Points Creation is set to "true"
How can make this default to "False" in my template. I've tried changing it and then saving the template again but it reverts to true all of the time. I have to select my points and do apply desc keys whenever I import points.
View 2 Replies
View Related
Dec 11, 2013
When I open CAD, a blank Drawing1 file opens. I know that under Options, you are able to modify certain settings. I also know that you can edit more specific settings such as what layers and text styles for that Drawing1 file under your C drive. I think it is:
C:UsersAppDataRoamingAutodeskC3D 2014enuSupport
I have done this before but I cannot remember how. An example of what I am trying to say is in the Drawing1 that opens when you start CAD, it does not have a layer called TOPO. I want to have it so that everytime I have a new drawing1 open, it automatically has the TOPO layer in it. I know that you can do this by changing the file it references in the C drive, but I forgot how I did it.
View 2 Replies
View Related
Dec 24, 2013
I am still trying to learn the basics in AutoCAD. Here is an example: I have many lines created in a drawing that all are different in collar,layer,line type,. Now I want to start drawing a new line But with the settings of a specific line . instead of changing every attribute(collor,layer,line type.) How can I simple pick a line I like from the drawing and then the line tool adopts the settings from that line? The same question for other tools for example text, dims,... Is the a tool the simple picks the objects attributes and make those current ?
View 4 Replies
View Related
Jan 21, 2013
Where can I find the corridor display tab/settings?
Some things, like surfaces and such, are easy to find, but for the life of me I cannot find the location for settings corridor layer & linetype & color settings (display tab).
One of my last holdouts from LD is to manually draw my curb & gutter linework and ignore the lines the corridor would create for me. I basically used the corridor lines as verification, not their full use. I decided to break from this habit, then spun my wheels trying to locate where these settings might be.
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
View 3 Replies
View Related
Dec 3, 2013
I'm running AutoCAD Civil 3D 2014 on Windows 7 Professional. I just got this new computer and the AutoCAD software was recently installed. As I always do when I get a new version of ACAD, I set up my Profile settings within the 'options' menu and save to my personal Profile, and set that profile as current.
Then I pull up all my typical toolbars, Layer manager, Xref manager and all that good stuff to my workspace and save a new workspace with my name, and set that workspace as current.
Now, with this new version of ACAD, every time I restart the program my settings are all gone. Even though my 'options' Profile is still saved in there, it's not set to current, so I have to do that every time. As well as my workspace, which doesn't appear the same way I set it up and saved it as a new workspace:
The ToolSpace, the command bar and the Xref manager disappears every time.
View 1 Replies
View Related
Dec 12, 2012
After having struggled to get Autodesk 360 working, it is constantly pestering me to say my settings are ready.
I have synced my settings to the Cloud (I like this function) but why are my settings ready to load as presumably syncing to the Cloud duplicates the settings on my machine??
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 1 Replies
View Related
Apr 4, 2008
How or where do you set the default value under the Edit Command Settings for, say, AddContourLabeling? Right now it is saying that I'm overriding the default to our company standard, but I want the default to be the company standard not the "Standard" style. This goes for all command settings. I'm sure the default is set somewhere.
View 2 Replies
View Related
Mar 22, 2012
I am using Map 3D 2010/Civil 3D2010/AutoCad 2010. Is there a way to change the default settings in the Map Import dialog box? I want to "Create Object Data" and "Import Polygons as Closed Polylines" with every shp file I import. It would be nice if I could have these parameters selected by default instead of having to check them both with every shp file I import. Is this possible?
View 1 Replies
View Related
Mar 29, 2012
After you go thru and setup all of the links and feature lines that you want to use to create a corridor surface, is there any way to save that particular setup to be used on other corridors? That way you would not have to select all of them again and again, every time that you wanted to create, say a datum surface.
View 1 Replies
View Related
Dec 16, 2011
Noticed that after the last update many profile settings like snap aperatures, OSNAPS, and data shortcut working files aren't being remembered? It has only happened to a couple people, but they are having the exact same issues.
I wish it was simple as the shortcut being reset or pathed to the wrong profile, but it's not the case.
View 3 Replies
View Related
Nov 21, 2013
Where I can find a printable doc/chart of the pen settings, with their colours and pen widths ?
View 2 Replies
View Related
