AutoCAD Civil 3D :: Corridor Display Settings?

Jan 21, 2013

Where can I find the corridor display tab/settings?

Some things, like surfaces and such, are easy to find, but for the life of me I cannot find the location for settings corridor layer & linetype & color settings (display tab).

One of my last holdouts from LD is to manually draw my curb & gutter linework and ignore the lines the corridor would create for me.  I basically used the corridor lines as verification, not their full use.  I decided to break from this habit, then spun my wheels trying to locate where these settings might be.

Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013

View 3 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Corridor Surface Settings

Mar 29, 2012

After you go thru and setup all of the links and feature lines that you want to use to create a corridor surface, is there any way to save that particular setup to be used on other corridors?  That way you would not have to select all of them again and again, every time that you wanted to create, say a datum surface.

View 1 Replies View Related

AutoCAD Civil 3D :: No Corridor Section Editor Display

Jun 22, 2012

C3D 2012

When I open the Corridor Section Editor, the Ribbon changes to the Section Editor ribbon, but the section window doesn't come up. If I pan around, parts of the drawing disappear. If I close the editor and regen, everything comes back.

View 5 Replies View Related

AutoCAD Civil 3D :: Corridor Section Editor View Settings?

May 25, 2012

How do I access the Corridor Section Editor view settings and copy them from one drawing to another?

View 1 Replies View Related

AutoCAD Civil 3D :: Corridor / Surface Style To Display Slopes

Jun 6, 2013

I am looking for either a corridor style or surface style to display slopes while in plan view while working on a corridor. I know you can turn on slope arrows as a surface style, but I am actually looking for the grade to be displayed next to a slope arrow. Hopefully I am explaining it properly.

I just am looking for a better way to spot errors before putting surfaces into machine control without checking station by station in the section editor.

View 4 Replies View Related

AutoCAD Civil 3D :: Importing Settings From Drawings With That Display

Apr 2, 2012

I have created a profile showing existing and finish grade. I can't seem to control the appearance of the existing grade line and the finish grade line individually. I need finish grade to be color 161 and existing grade to be color 252, but whatever I set as a color applies to both.

I have done this in the past with no trouble at all, but can't seem to get it to work now. I even tried importing settings from drawings with that display, but nothing has worked yet.

View 1 Replies View Related

AutoCAD Civil 3D :: Surface Corridor Is Not Triangulating Entire Corridor Boundary

Sep 14, 2012

I have created a surface from a corridor.  I set the boundary of the surface to the daylight of the corridor.  In some areas of the corridor the surface does not triangulate see attached.

View 2 Replies View Related

AutoCAD Civil 3D :: Copy Corridor Or Corridor Station Values Only?

Dec 13, 2012

Copy a corridor successfully? I'd like to try this just a little worried about the explosion of evil this may cause to my Civil 3D session.

Even all the properties of the corridor setup from one to another would be useful. I'm building one corridor and an 2nd one that matches everything except I need to replace my Assembly with one meant for stripping.

View 9 Replies View Related

AutoCAD Civil 3D :: Corridor Surface Is Not Matching Corridor Top Links

Mar 21, 2013

My corridor surface is not matching my corridor top links.  see attachments.  this is affecting my volumes!

The section-plan(surface red).png is showing the section editor and the plan view.  the red highlighted line in section is the corridor surface and as you can see in plan view the surface is incorrect and wiggly.

The pdf is all my sections with the red linework being the corridor surface.

C3D ver 2012
Win 7, 64bit

View 2 Replies View Related

AutoCAD Civil 3D :: Gap In Corridor

Jun 13, 2013

C3D 2014

when I created a Top surface, C3D showed me otherwise. I need a gap at an intersection. In the attached DWG the intersection corridor has been removed from view by isolate.

I used 2 seperate baselines to force the road corridor to have a gap at the intersection.

Looked OK .. except ..later .. when I created a Top surface, only the first baseline is used to create the surface, the second baseline is skipped   : (

I obviously did not make a gap correctly. What is the correct way? Or.. is there no way .. must the designer create multiple seperate corridors when the road has gaps? 

View 3 Replies View Related

AutoCAD Civil 3D :: How To Get A Continuous Corridor

May 2, 2013

I have a very basic question about creating corridors. As you can see on the attachment, i created an assembly consisting of ditch and my own polyline subassembly and turned it into a corridor. The ditch part is drawn out correctly, but the other part (supposed to be a gravel road) has only sections in certain points.

View 4 Replies View Related

AutoCAD Civil 3D :: DWF Corridor Quality

Dec 29, 2013

I started playing around with 3d dwf's. I'd like to share my corridors in a 3d dwf viewer or something similar but when it opens in design review, everything is skewed/ jagged/garbled. The other problem is that it exports everything (assemblies, alignments, sections  etc.) so it make viewing navigation difficult in the viewer for people that aren't CAD savvy to begin with. It would be ideal if you could select what you want to export similar to exporting a wmf file.

How do others share 3d models with non-cad people?

View 1 Replies View Related

AutoCAD Civil 3D :: Where Is Corridor Surface

Mar 21, 2012

When i try to create a material list, i don't see my corridor surface - just the EG surface appear in the list.

View 2 Replies View Related

AutoCAD Civil 3D :: Add Subassembly To Corridor?

Nov 18, 2013

We are trying to edit a small portion of an existing corridor by adding a generic daylighting subassembly.  The add subassembly tool in the Corridor Section editor works, but we get an error because the new sub doesn't have a target surface specified.  how to add a target for a sub that is added after the corridor was created?

Civil 3D 2012 & 2013 & 2014
Toshiba Qosmio X505-Q890
2 x i7 - Q740 quad core CPU's
8GB of RAM
60GB SSD + 500GB HDD
NVidia GeForce GTS 360M - driver 8.17.13.0697
Win 7 Home Premium

View 9 Replies View Related

AutoCAD Civil 3D :: Alignment From Corridor

Feb 7, 2013

When creating an alignment from corridor feature (ditch invert level), the created alignment is not following the selected line (see image bellow). The alignment seams to be created from the first point of the feature line to the last point and ignores all the other points. The vertical alignment created at the same time seams to be correct.

View 1 Replies View Related

AutoCAD Civil 3D :: Creating A Corridor

May 16, 2012

I am trying desperately to create a corridor in C3D 2013.

I have the requisite Alignment, Profile and Assembly, yet when I create the corridor, either nothing appears, or it creates the corridor at incorrect elevations.  I have the proper elevations in my alignment.

View 7 Replies View Related

AutoCAD Civil 3D :: Move A Corridor

Mar 20, 2012

I had a grading plan all set, with a corridor involved. Then, I received a new survey that I didn't know was coming. I need to move all of my elements to different coordinates. I can move everything except the corridor.

View 2 Replies View Related

AutoCAD Civil 3D :: Get Rid Of Corridor Gaps

Jun 13, 2012

How to get rid of this gap? Everything I have tried just causes overlaps.

View 1 Replies View Related

AutoCAD Civil 3D :: Profile From Corridor

Jan 11, 2013

I only get 2 choices when selecting corridor feature line to create profile - ETW_base, and ETW_sub.  My Subassembly has 2 pavement sections, a base and subbase section.   I need the top of pavement profile. 

View 2 Replies View Related

AutoCAD Civil 3D :: Can Cut Corridor With (for Example) 45 Degrees

Nov 6, 2013

I have a corridor with  intersection.The intersection isn't  90 degrees. Can I cut corridor with(for example) 45 degrees?

View 9 Replies View Related

AutoCAD Civil 3D :: Create Grade From A Corridor

Aug 27, 2013

I want to create a grade (without object grade) using a corridor. This is my assembly:

This only contains  the sub assembly "DaylightBench" in the side right.

I have the alignment and profile. I have created the corridor. 

red line= alignment
green line= feature line (code Intersecction) converted to polyline.
pink surface= surface (code TOP).

I have added a boundary for surface of type "add from polygon" and I have selected the closed polyline(green line).

However, the boundary seems doesn´t work.
 
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit

View 5 Replies View Related

AutoCAD Civil 3D :: Locks On River Corridor?

Aug 30, 2013

I am trying yo model river corridor with 4 locks on it. On every locks different between levels is about 2-3m. I it is possible to create profile perependicular to bottom of river. How to create it?

Another question how to later connect surface. I mean Existing ground and corridor intersect. Ho to prepare later for render Existing ground with cutted corridor river? where I am below EG.

View 6 Replies View Related

AutoCAD Civil 3D :: Corridor Volumes Into Sections?

Jun 7, 2012

I have sevreal corridors with various spurs.  The contractor wants the cut/fill volume in sections along the corridors, not one big cut/fill calc.  Is there a way to do this in C3D?  I have got the volume table with the chainages on, but he does not want a cumulitive figure for the whole corridor.

View 1 Replies View Related

AutoCAD Civil 3D :: Corridor And Assembly Daylight

Nov 14, 2013

I am creating a corridor with a simple assembly. On my assembly, I have basic lane and daylight Multiple surface. My target is existing ground.

View 9 Replies View Related

AutoCAD Civil 3D :: Creating Surface From Corridor

Jul 11, 2013

I am trying to create a surface from a corridor.  I have a sub-assembly attached, which I believe is working correctly.  I managed to create the empty surface and when I try to add surface data nothing seems to happen.  I keep changing the specified code to Base which is my finished gravel structure and hit the + but again nothing seems to happen. 

Ultimately I am trying to determine a volume between my corridor and original topo.

View 4 Replies View Related

AutoCAD Civil 3D :: Profile And Corridor Design

Jan 8, 2014

I need to design a project but ı cant..ı have two profiles in use for one alignment..ı want to use left profile for left side, use right profile for right side.and ı want to draw cross section only one..how can ı design like this project..

View 8 Replies View Related

AutoCAD Civil 3D :: Add Different Assembly Types Along Same Corridor

Oct 17, 2012

I want to add different assemblies (some with walls or ditches) along the same corridor at given stations

Can that be done?

View 4 Replies View Related

AutoCAD Civil 3D :: Label Corridor FG In Sections

Nov 22, 2011

We have created sections from our corridor. We see FG and EG, we can use bands for EG from surface. How do we get the FG band to show the elevations for FG? The only option we have is the EG surface. We have tried to create a surface form the corridor in the corridor properties but that surface still doesn't show up in the surface list in the bands. I would have thought this info would be dynamic and come directly from the corridor would it not?

View 3 Replies View Related

AutoCAD Civil 3D :: Why Corridor Adding A Hinge

Sep 18, 2013

Why is my corridor adding a hinge?  [Atleast I think that is the problem]

I am trying to create a berm that is 8' wide.  For my assembly I used 4' wide basiclanes and daylightgeneral (with 3:1 slope in all parameters) on left and right side.

In the top image I have circled two of the areas in which the hinge line is shown.  And in the bottom right the cross section of one side of the berm is shown.  As you can see on the inside (left) there is two feet sloped at approximately -1% before it daylights to the surface at 3:1

Why isn't the left side matching the right?

View 4 Replies View Related

AutoCAD Civil 3D :: Stop And Go Corridor On Alignment

Mar 19, 2012

I want use my corridor where I need it and not use one in certain areas. For a proposed dike. Some places doesn't need to be replace.
So I need a way to use my section on the alignment. where I can find that option?

View 4 Replies View Related

AutoCAD Civil 3D :: Surface Creation From Corridor

Aug 24, 2012

I am having some issues with my corridor. It is for a 1.5 mile two lane section of highway. When I created the corridor, I used 15 assemblies. Now, when I try to create a corridor surface, I have issues. The file crashes when I try to load the surface.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved