AutoCAD Civil 3D :: File Is Never In A Saved State
Mar 12, 2013
Alright, I'm not actually trying to do customization, I have a client that cannot save his drawing and have be in a "Saved" state. When creating a data shortcut, after saving the file (and doing nothing else, I watched), he is unable to create the shortcut because the drawing needs to be saved. Another example, when doing an e-transmit it tells him that the drawing hasn't been saved and if he wants to save the file. He clicks YES and then it tells him the drawing hasn't been saved and asks him if he wants to save it.
It seems to be isolated to this file. If he works in a different file, it works just fine. Also, I had him send me the files (via e-transmit) and I was not able to replicate the problem so, it seems to have something to do with this particular file on his system.
My question then is, can something be embedded into the file that will cause something to happen directly after a save (like a reactor)?He's using Civil 3D 2012 but I don't think it's anything directly related to Civil 3D.
View 4 Replies
ADVERTISEMENT
May 31, 2010
When I edit a layer state it doesn't save any of the changes.
View 1 Replies
View Related
Nov 13, 2012
I´m trying export to dwg, and I can see all the process, but the export file is not saved.
I´m using the Autocad Civil 3D 2013 and this just happens in one specific file.
View 9 Replies
View Related
Jul 29, 2011
Another annoying difference between Max 9 and 2012: I have to select the Freeform Gizmo for every instance of an Unwrap UVW editor. It seems the new default is Move Mode and in Max 2012 there is no memory of the last selected state. Ug!
The 'Save Current Settings as Default' is not useful.
Any ini setting which will set the Freeform Gizmo to the default?
View 1 Replies
View Related
Mar 8, 2012
I have one file (file A) which xrefs several files, all with various layers turned on and off. I created a new file (file B). I xref file A into file B, and ALL layers in file A's xrefs are turned on, and I have to go into layer manager and turn off all unwantd layers. Is there any way to make it so that the layer state in file A is kept, when xreffing it into file B?
View 6 Replies
View Related
Mar 12, 2013
When a raw file badge shows that the file has been changed, I use Metadata Save to File & for the large majority of my images, the badge goes away and Metadata Status Changed does not show the file. For some of my files, however, the Save to File command doesn't work properly. If I am only displaying files with changes, the file briefly disappears, then returns. Even if I go to Windows Explorer and delete the xmp file, then again Save metadata to file, it pops up again with the badge saying it needs to be saved. I'm using Lightroom 4.3 64 bit on Windows 7.
View 12 Replies
View Related
Nov 12, 2013
Is it possible to keep the dragged labels in the same configuration when import the same points with the same numbers second time (with different descriptions) choosing overwrite option? I want to avoid to move the points second time to make the drawing readable.
View 9 Replies
View Related
Jul 25, 2012
I recently obtained a new laptop with a Solid State Drive and, holy smokes, it's seems at least twice as fast as another laptop with comparable specs like RAM and processor. I used a stopwatch. It was incredible.
Things like opening the program, opening drawings and re-loading Xref's are all way way way faster than without the SSD.
To those of you who have added SSD, are you seeing the same boost? This appears to be an easy way for Civil 3D users to increase speed tremendously, without purchasing a whole new system.
View 9 Replies
View Related
Jun 6, 2013
When dragging the point labels the arrow pulls away from the point. Is there a way to get the machine to have the arrow to touch the point it labels.
View 4 Replies
View Related
Sep 9, 2009
I have an alignment label that uses "dot blank" in the dragged state. In the drawings that the alignment is xreffed into, the leader converts to "closed filled".Why? How do i fix it?
C3D 2008
View 8 Replies
View Related
Nov 26, 2013
I am trying to line up labels in a dragged state. When I select the label and move it I can line it up nicely (as shown by the 6" V&B looking in line with the hydrant. When I select the point, the label shifts left (as shown by the 6" V&B far left). Is there a neat way to line up multiple labels? Civil 3d 2012
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
View 1 Replies
View Related
Jan 4, 2013
When I drag text away from my point there is no leader. I have gone thru everything I can think of in Label and Point styles. I know its probably a simple fix. Somewhere down the rabbit hole is a box that needs/or not a check.
View 2 Replies
View Related
Mar 9, 2013
“Locking” the layers state (turned on/of frozen/thawed/ locked/unlocked, etc.) in the viewport,
I’m wondering if there is a technique that allows locking the “state” of layers (turned on/of frozen/thawed/ locked/unlocked, etc.) in the viewport mode such that the viewport will keeps its required state REGARDLESS THEIR STATE IN THE MODEL MODE!
For example, in the screenshot below, freezing the point in the model mode will also freeze them in the viewport! And thus the layer state are not kept as required in the viewport which adds more efforts.
One possible option is saving the layer state! But this feature is not a property for the viewport but needs to be selected from the layers option. And thus we need again to think about layers that are supposed to be turned on/of frozen/thawed/ locked/unlocked, etc. in a particular viewport.
What I need here is to LOCK the viewport not only in terms of scale but also regarding the state of layers!
View 6 Replies
View Related
Jun 24, 2013
I have a line label style that I created for labeling bearing and distance. The Dragged State Component for display is set to "As Composed", because I want to just slide it down the line a bit, but have it remain at the same rotation as the line, and it is not allowing me to do so. I also have a label style set up for "Stacked Text" and that works fine when I move it away from its original line I labeled
View 2 Replies
View Related
Jan 14, 2013
i am trying to get the coordinate value for the current station in the subassemblies.
i found
Autodesk.Civil.Roadway.DatabaseServices.BaseBaseline.StationOffsetElevationToXYZ(ByRef Autodesk.AutoCAD.Geometry.Point3d) As Autodesk.AutoCAD.Geometry.Point3d
but how you get the basebaseline?
in the alignment object there is no convert station to coordinate only coordinate to station. which is useless in this case.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
View 2 Replies
View Related
Aug 26, 2013
I have several .dwg files from an architect each with several hundred layers. I set up a Layer State in one drawing with just the layers I need. I want to use the same Layer State in the other drawings. I opened the Layer States Manager, selected my layer state, and clicked export, selected a location and closed the window.
I double checked in the file manager in Windows 7 that the .las file was where I had exported it. Then I opened the next .dwg, opened Layer States Manager, navigated to the file location and the .las file does not show up.
When I go back to the original drawing and click Import, the .las file is not visible either, but it is if I click Export.I am working on drawings on my hard drive not a network, and saving the .las file to my hard drive.
View 2 Replies
View Related
May 17, 2012
When creating a style, (for example a Spot Elevation style), I'd like it to be in a dragged state upon insertion, rather than having it plop down right at the point and then having to click and drag it off to where I want it.
I can't seem to find the option to change this though..........
View 4 Replies
View Related
Dec 21, 2012
Why doesn't the drag state work when adding a line label between 2 points in Civil 3D 2013.
View 2 Replies
View Related
Jan 30, 2013
I'm trying to set up my point label styles and I don't understand how the dragged state settings work. The default setting is "as displayed" but then the leader does not flip, if I change the settings to "stacked text" the leader flips but the text is out of order. See the attached plot of some points to see what I mean, default on the right and stacked text on the left.
How can I set the point label so the leader will flip and keep the label components in the default order?
View 7 Replies
View Related
Apr 9, 2013
I have a surface that shows perfectly when restoring the PCSM layer state (Old LMAN function). When I restore the Grading layer state - the surface contours show incorrectly.
It is like a hide or mask feature turns on and off.
View 1 Replies
View Related
Sep 23, 2013
I have a button with the following actions:
click:
sym.play(2000)
;mouseover:
var mySymbolObject = sym.getSymbol("Guns_Nav")
;sym.$("Guns_Nav").css({opacity:.3});
mouseout:var mySymbolObject = sym.getSymbol("Guns_Nav")
;sym.$("Guns_Nav").css({opacity:1});
I cant figure out how to add 3rd action on my button, to show an active state (basically freeze the buttonts opacity until the next button is clicked) while this portion of the stage is being visited.
View 3 Replies
View Related
Sep 24, 2009
The labels normal anchor point is the bottom outside diameter of the pipe, but when dragged the anchor snaps back to the cl of the pipe.
The only workaround I was able to come up with is a "static" leader made up of two lines and an arrowhead block, which you can only slide up or down the pipe with the desired appearance but can't stretch.
The attached image shows the Civil 3D pipe label above and the desirable text/leader legacy version below.
View 1 Replies
View Related
Mar 27, 2012
I'm having trouble getting my label style to flip when in dragged state. If I drag it off to the right, the text and line show up just fine, but if I drag to the left, the TC and FS head that way, but the line in between stays put.
View 8 Replies
View Related
Jun 6, 2012
In Civil 3d 2013, my points appear as follows with Point # on top, elevation in the middle and description at the bottom.
But when I drag the label, it changes the order of the labels to Description on top, point # in the middle and elevation at the bottom.
How do I make the dragged state labels appear in the same order as the first picture?
Also, how can I keep the colors from picture #1 (red, yellow, green) into the dragged state labels as well?
View 7 Replies
View Related
Jul 23, 2012
In AutoCAD Civil 3D 2012 when assigning the state plane coordinate system LA83-SF is missing from the Library. Although it is visible as a choice to select in the Available coordinate systems window when creating a Category.
View 8 Replies
View Related
Oct 9, 2011
So I figured out how state set works.
Is possible enable/disable a state set everytime I change a scene state?
View 3 Replies
View Related
Dec 27, 2012
My dragged state leader does not display properly. The attachment runs through my first line of text. My display is set to "As Composed" I do not want the stacked text setting.
View 9 Replies
View Related
Jun 3, 2013
For some reason, when I go to open my latest MAX2014 file... the State Sets dialog shows briefly on the screen while the file is being opened but then disappears just before the file finishes opening.
I don't use State Sets so I'm not sure why this dialog is showing.
View 2 Replies
View Related
Apr 11, 2013
In the dragged state, I don't want to use 'As Composed' because the label is composed to be parallel to the line, but I want it to flip to horizontal to the view when dragged. This is working fine with 'Stacked Text'
What is not working is the text justification. I want it to remain centre justified, as it is composed. But there doesn't seem to be any option for this when you use the 'Stacked Text' option for the dragged state. I thought that setting the 'Leader Justification' to false might do it, but that just makes it always left justified. Am I missing something here? Is there no 'Top right/bottom right/middle center/top left.....' option for Stacked Text? And if not, why not?
I'm in 2011.
View 9 Replies
View Related
Nov 15, 2011
I am using R14 autocad.
i have created a project drawing , i have saved it as dwg file. But when i open it all my commands are gone, How to get Commands i have used
View 4 Replies
View Related
May 5, 2012
My friend was working on a file and did certain amount of work and then saved it. After an hour when he opened it again, all the work that he did was not showing. But it shows up in the preview icon of the autocadd file.
As such no layer is frozen / hidden / locked.
View 8 Replies
View Related
