When i plot an autocad drawing to pdf and put it into photoshop to edit it. Upon saving and opening it again the quality has dropped and the lineweights have gone from black to grey.
Im sure there is a correct process for exporting to pdf and editing in photoshop and saving in the correct format.
I edited a video and I want to render the new video. Everything looks fine but when the exporting process terminates the filesize is always zero !!
View 10 Replies View RelatedI work at an animation studio where our artists work directly in Photoshop CS5 to draw storyboards (3 panels across). We are having major difficulties figuring out how to successfully convert our action (which exports the three panels as tiff images) into a batch process,
The action basically just selects each channel of the main storyboard (three channels for the three panel areas), copies/pastes the image into a new canvas, saves that new image as a tiff to the desktop. It does that for all three panels and yields three tiff images on my desktop, which I then have to drag and drop into a folder before running the action on the next page or else it will replace the previous round of images (saving over them).
Using Automate > Batch doesn't work and I am wondering if it is even possible to run a batch or if the action is simply too complex because it creates three new image files.
So just a few questions here, I have a process where I go through my RAW D800 photos and do general touch-ups in camera, but have been wanting to do skin touch-ups in photoshop. My problem lies in the photo sizes (45mb per RAW photo to begin with). Is there any sort of way to make a workflow that would allow me to retain the raw photos and seperate photoshop files in a convenient manner?
I'm simply looking to avoid having 2GB folder for just a few images, and wondering if there's maybe some appropriate file formats for that.
We live in an age when most architects use computer software in the design process, and I wondered how the tablet may be useful in this process? whether it is better to use a mouse with high precision when using programs such as Revit Architecture, ArchiCAD, or things like that.
View 4 Replies View RelatedWhen I edit a photo the process doesn't complete itself. The edit in progress message stays on.
View 4 Replies View RelatedI have cropped some pics during the editing process and when I go to print them out the pixels are really messed up. I am using a Nikon D3100. Maybe I am saving them wrong or something. I am saving them as JPEG.
View 4 Replies View RelatedI have noticed that when exporting a Quicktime from release 5 the Background Process window wont show the actual progress so there is no way of knowing if it is working or how long will it take.
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
if this has come up before, but can I expect an improvement in rendering speed or get other performance improvements by adding a solid-state drive (SSD)? Will an SSD speed up making proxies or make the editing process faster/smoother in general?
View 7 Replies View RelatedI have a problem of exporting from DWG format in autocad architecture to IFC, problem message says (IFCEXPORT System Error encountered during import)
View 2 Replies View RelatedI've made a short animation that I want to use in my video project created in Final Cut Pro.
I need the video to have an Alpha Channel.
The animation is a Lower Third to put titles on.
how I do this.
and how do I export the file?
This problem only occurs with files that I have been imported from cd's/dvd's into the libraryand I get the msg "Lightroom was unable to prepare the selected file for editing. It will not be opened." Files that are stored on my hard drive have NO PROBLEM in being edited. .
I am new to Lightroom and currently using it on the 30 day trial I have been using PSE for a long time and have over 90,000 images in Organizer and all of my images are on cd's/dvd's, very few are stored on the hard drive.
I am trying to get my first 3d print of a model and am having problems getting it into a format that the printing service can use. I've read up and attempted stlout, 3dprint, and export commands to no avail. I get the message that the objects need to be 3dsolids or watertight meshes.
After reading all the hype on 3d printing and being very excited about it, I"ve got to say that I'm a bit overwhelmed with the steps it appears one has to take to get an architectural model to print.
The model is made with aca 2012.
I record video tutorials about Photoshop (so, screen captures) and edit/combine the clips inside Photoshop CS6 in Win 7/64; Photoshop's new video talent is nice. I record 852x480px at 15 fps with FastStone Capture and save in WMV. I want to show the finished video tutorial on Youtube. There are several things baffling me when editing video in Photoshop CS6.
My original records (according to MediaInfo):
Software: FastStone Capture
Overall bit rate mode : Variable
[code]....
The result looks very nice when i play it locally in VLC. It looks like the original WMV. But: When i upload the Photoshop-version to YouTube, the video looks very badly "upsampled" and blurred. It looks much worse than the uploaded WMV original. If you like, you can compare the two videos from the same source online:
Uploaded WMV clip, looking good (set player to 480 p): URL....
Rendered in Photoshop CS6, looking bad (set player to 480 p): URL.....I do like the resolution of 852x480 and would like to keep it. If not possible, i have to record tutorials in 1280x720, even though icons and menus look too small. So far i have not tested it.
I searched my folder C:Program Files (x86)Common FilesAdobedynamiclinkmediaserver1.0. There is a lot in it which i don't understand, but some file names include "MPEG", "AVI", "Adobe QT Server" etc. I think there is no Quicktime installed on my machine; i try to avoid it as it does many different things to the system and is obnoxious.
My questions:
- When aiming for a YouTube cast, could i stay with 852x480 (at 15 fps), or doesn't it make sense? (I like that size.) If 852x480 is not ok, what is the lowest resolution for getting good looking presentations on Youtube?
- Why does the Adobe Media Encoder in my Photoshop CS6 only offer the formats H.264 and DPX? Can i get more? (Free, pay.)
- Do i need to install Quicktime? How could i do this with less intrusive QT behaviour?
- Should i record more fps in FastStone Capture? (I don't find more fps necessary when looking at the original and when looking at the uploaded *original*.)
We are creating property set data and attaching it to polylines in autocad 2011. export the drawing to the older format (2007) and maintain the property data connection. We don't have and old version anymore so I can't test.
View 1 Replies View RelatedI recently found a command on the internet that enables only solids in a .dwg to be exported to a seperate autocad .dwg, muggins here didnt take a note of the command and I have searched google ten times over to find it again but to no avail.
View 1 Replies View RelatedWhen I am trying to edit mtext and also when i the DDEDIT command to edit multi-line dimension strings, the text becomes obscured. So far nothing makes it visible again until I exit out, which is (as I am sure you can understand) making editing text extraordinarily challenging.
View 3 Replies View RelatedWe wonder how we can save a dwg to editing restrictions. For example: We send a DWG file to an external user by only allowing him to view the file. We want to disallow editing of the file. Is it possible?
View 2 Replies View RelatedWhen you double-click on xref within the viewport and refedit opens and allows you to edit xref, how do you exit refedit mode when finished? I can not find the ref edit icon menu on 2013 banner layout.
View 1 Replies View RelatedI don't know why this isn't working for me today. I want to edit the Bay Size of my Ceiling Grid in one room. When I select the Grid..right click Properties and select the Bay Size, I can't seem to change the size.
View 2 Replies View RelatedI had a problem exporting editing images to DNG. Lightroom will only export the original unedited versions to DNG. If I export to JPG I get the edited versions, but it will not export the edited versions to DNG.
View 5 Replies View RelatedWhen initiating the hatch command H at the command line my panel changed to the hatch panel. Now the command opens the more traditional hatch dialog. I don't how it happened, but just when i was getting used to the panel.
When editing a hatched area the panel appears. Why when I stretch some hatched geometry does not the adjacent hatch stretch with it?
I use Autcad Architecure 2010 on my computer.
After I created or made a multiline text, the ribbon in autocad is getting all blurry. None of the icons in the ribbon will work (see attached picture).
I always have to shut down Autocad and restart it to continue my work.
I'm exporting DSLR footage with synced audio in order to "bake" the audio in. I'm going to bring the export into Prelude to organize and then back into Premiere to edit. What are the best export settings (including target and maximum bitrate) to maintain top quality footage that I'll continue editing?
View 1 Replies View RelatedI'm editing .mov 1080p video clips from my DSLR in Lightroom 4.4. I,m using the slider bar to set a new "inpoint" and "outpoint," shortening the video. When I export, I am using the original format and new file name. Lightroom tells me the video is shorter in length, but when I play it back in Windows, the new file is the original length. What am I failing to do/see here? I'm using Win 7
View 1 Replies View RelatedI've got a problem following playing around (Typical, isn't it?). Architecture 2011 allows editing property sets from external objects through the host drawing (i.e. change a room number of a property set attached to a space xref'ed in from another construct). This obviously has to put an editing lock onto the xref to prevent data loss in case somebody else works on the xref in the meantime. This editing lock is removed when I close my host drawing. However, the lock is immediately restored when I re-open the host drawing.
How can I release the xref file lock again after editing the property sets in my host drawing?
How the PMS color palettes "simulate" on screen how the color will print on different substrates (glossy vs matte vs uncoated paper). That's great for comps, but if you convert it to CMYK to print it, and the values are representing a "simulated" color it won't look correct (by that I mean come close to matching the spot color). For example, the uncoated palette simulates the color by making them appear a bit washed out on screen - pretty good visual simulation. But it might do so by adding black and cyan to orange for example, etc. - effectively dulling the original color.
So if I convert that to CMYK within the new Pantone + color palette, and then send it to the printer - it won't appear as it did on screen, it will dull the end color even more because it's converted the color to the dull simulated version - what a disaster! It's only doing half the job - showing us what it should look like on screen. In order to be truly efficient for design professionals the CMYK conversion might remove black and cyan completely to effectively brighten the color in the final output on uncoated paper. I would prefer it just stick to the standard conversion, which Pantone did have as a standard palette option (PMS to process), and then I can adjust if I think it's necessary.
Any corporate branding system will likely start with a PMS spot color palette for the identity. Then it will build into many different adaptations - full color brochures, large format banners and trade show graphics, website, advertising. So any corporate branding system will need to have PMS, CMYK and RGB versions of their main corporate color palette. There was a standard for these translations that was automatically consistent in the Adobe software and that is now all over the place, so it relies on individuals manually adapting the color mixes for final use - what a great way to screw things up.
I updated my computer to windows 7 32 bit and need the file: AdskHwCertificationDatabase.xml - version 17.1.0.4 so that I can find out the correct driver for my OS and my quadrofx 1700 graphics card. Autodesk doesn't support 2008 Architecture and the on;y file I can find is buried in a torrent file with a pirated copy of 2008 and I DO NOT wish to download that.
View 3 Replies View RelatedIm currently using Autocad Architecture, is it true that Autocad Architecture creates a bigger file size compared to Revit Architecture? Lets say that same structure and components are created.
View 3 Replies View RelatedThe content browser in AutoCAD Architecture 2013 does not seem to be working on a standard users computer. The profile has been rebuilt alongside a repair/reinstall through the control panel.
Ctrl+4
Tools > Content Browser
and typing content browser in the command do not result in anything.
I do not get why new Archicad Architecture has 3d modeling when Revit architecture already provided for it. What is the different between those two? I really want to know the difference. It bothers me somewhat about them.
View 4 Replies View Related