how to bring the layer description with the translation. For example one client uses the names of level 1, level 2 etc. What is on the layer is the description for expamle LEVEL 1 / BORDER. when I translate it oputs the layer name as the description.
View 5 RepliesA drawing with hundreds of layers should be simplified for our customer by decreasing the numbers of and renaming the layers (there is yet no target file existing). In order to solve this, I generated group filters and assigned every single layer to them (all printing properties are assigned to objects). The layer groups show the desired layer structure after the transformation (still a three-digit number).
Unfortunately, the LAYTRANS dialog doesn't let me choose layers by group filters or remarks. It seems as all the work was for the birds.
Is there any way to translate my layers using filters or remarks?
I use AutoCAD Civil 3D 2010.
Is there a way in .net to add the layer description field (viewable in the Layer Properties Manager menu) to the layer dropdown list? Our designers want to see this information without opening the Layer Properties menu.
View 9 Replies View RelatedFor instance I have a layer called wall the colour is black. I draw a rectangle 1200 square. I then switch to window layer which the colour is red, I copy my window 1200 square from my library and then move it and place into my wall, the window now covers the wall layer, what i want is the wall layer showing over the window, how do I do this.
View 3 Replies View RelatedI have tried turning off all the other layers, selecting everything visible, invoking DRAWORDER, and selecting "front", but when I turn the other layers back on, some of them are still in front of what I want to be visible. It's a big document with a bazillion objects and 20+ layers; going through and selecting every one of them individually could take hours.
View 2 Replies View RelatedI have recently started using FIELDS in our drawings. I must say, they are very powerful.
This is what I would like to accomplish but have not been able to do it on my own.
I want to be able to add text/description to a block, then invoke that text/description with a leader. For instance, if I have a block of a 6x6 post w/ a square, I want to be able to insert the block, do a leader and invoke the custom description "P.T. 6x6 POST W/ CONC. FOOTING"
I remember reading a while ago about being able to select the layer you want and have everything on that layer brought to the front for ease of editing, however i can't remember the command name.
View 9 Replies View RelatedIt try bring an image into paint layer. I found that there is this function:
PaintLayerImporter() and it takes 4 parameters. They are:
1) const QString &sFileName, ///< Name of the file to import
2) int iFileTypeIndex, < Index of the type of the file in the array returned by SupportedExtensions
3) Mesh *pMesh, ///< Mesh which contains the paint layer
4) TexturePool *pTarget ///< Destination of the import operation
But I'm not able to get this function to work. Any small example how to use it.
I think that main problem for me is that I don't know exactly what 2) parameter means(int iFileTypeIndex). It says that you get that from SupportedExtensions but When I look at it:
virtual QVector<FileExtension> SupportedExtensions( void );
It surely dosen't look int.
Are you able to bring a text layer from Illustrator into Photoshop and keep it as a text layer? How is this done?
View 3 Replies View RelatedIs there any way to automatically fill in description in iProperties (.idw) from model description?
View 7 Replies View RelatedI'd like to add Layer descriptions , but I cannot seem to get out of the "D"escription option when the script runs so I get the some crazy descriptions. Is there a special key stroke to get to the next line to "M"ake a layer?
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
is it possible to make a LISP program whcih write down my layer name and description as text or Mtext in the drawing, so it will look like:
A_Wall architecture wall
A_Column architecture column
something like that.Each text, which is written in the drawing should have the same layer like the layer name.
the closest i can get is this code below, which write the layer as text, but what missing is: i want to add the description behind the layer name:
(defun c:layerlegend (/ osm ortho clayer celtype cecolor start-point line-length text-height *error*)
(defun *error* (msg)
(setvar "osmode" osm)
(setvar "orthomode" ortho)
(setvar "clayer" clayer)
(setvar "celtype" celtype)
(setvar "cecolor" cecolor)
(princ msg)
)
[code]...
A lot of times I'll be working on multiple .psd files and as I'm moving between files I'll notice that all the layers & layer comps will disappear from their palette
[URL]
I can bring them back by doing something like clicking on the text tool and then clicking on a text item on the stage. It's annoying because it takes a couple of clicks for the palette(s) to redisplay.
Is this a bug or is there a setting in preferences that can control this?
we are updating fron LDD 2004 to Civil 3D 2012 needles to say it a huge change. I've got my template almost done I'm just having one problem. With LDD any point that came in with a raw descripitoin not within the description key it would be placed in the current layer with point number, descripton and elevation. How do I make that happen with Civil3D do I have to change my default lable settings? When I import points with a raw description not within my description key it places the point on Layer 0 and only shows the node no point number.
View 2 Replies View RelatedI need to find all instances, references, etc, of a layer and change it to another layer. I'm not talking about lines and objects or even blocks, but more like properties nested inside of wall styles and cleanup definitions, anything like that. I can't use the QSELECT or any similar command because the layer in question is being referenced inside of individual styles (i'm guessing that's the only place).
We drew our interior walls and our exterior shell for our building on two different drawings so that two people could work on them at the same time. They were xref'd into each other. We got to a point where we needed to put them back into one drawing so I binded the Shell Xref into the interior drawing. This saved us a lot of time but now all the layers from the Shell drawing have this prefix to it "01Shell&0&". This isn't really a problem but I'm a bit OCD and it bothers me to have two different layers for the same thing, one regular and one with the prefix. It means everytime we change the properties of a layer, we have to do it twice. I've already changed everything I could back to the original layers but the Shell layers still show up from time to time. They are nested deep inside of wall styles and custom cleanup properties, custom encaps, and so on.
[URL]
Is there a way to have no layer value set for the description keys. I set all the layers, and now I realize I'd rather set this to no layers (boxes are all unchecked). I'd rather see no value under the layer column, but there doesn't seem like a way to set this.
View 1 Replies View RelatedWe have a minor issue with STEP translations. We keep our templates on the network, and they have a lot of customized settings. Everything is fine until we try to translate a STEP file, then Inventor wants to use the templates on the "C" drive (the ones that came with the software).
Is there a setting I can use to make Inventor use the templates on the network? I've got my "Files" setting in the "Options" pointing to the templates on the network, but Inventor still uses the ones on the "C" drive.
I am trying to model simple translation piece from rectangular to circle (one quarter). There is angle between rectangular side and circle side. I am able to model it very simple, but I have found that Inventor make some errors with lofted flange. Usually this type of translation piece should have flat triangles on the ends and bended triangles in corner. Unfortunately for some combinations of width/depth/diameter Inventor does not keep this rule and add some bended triangle to end edge.
Enclosed is pdf file with picture how this part should look, what is the problem and finally the ipt file is enclosed too. The part is OK with parameter SizeY=250mm and less and is wrong for bigger SizeY (for example 600mm)
I am using inventor 2012 and am trying to import my MDT(2002) drawings but when I try the translation process I receive an error message that says Mechanical Desktop must be installed. I currently of both Inventor and MDT installed and both operate correctly.
View 4 Replies View RelatedI have an assembly of a rod in a cylinder. When compressed, this rod sticks out 10mm from the cylinder. When extended, this rod sticks out 50mm. I am trying to create a drawing which shows the compressed state and extended state together.
View 3 Replies View RelatedI would like to show the motion of this assembly as it goes up, and rotates.
View 9 Replies View Relatedhow to make this Clamp Rod to Clamp Base Spacer Turn relationship.
this is from the Clamp Project on this site: Inventor Wizard, The Clamp Lever is turning or rotating the clamp rod into the Clamp Base Spacer but I could not simulate the Thread or the Screw motion if that is the term, or the 1 or 1/2 turn of the Clamp Rod to 1 Pitch movement, plus I can't seem to put the Rod inside the Clamp Base Spacer hole when the Contact Solver is ON, maybe modeling issue on my part.
Pt# 812 (From my drawing)
N: 2004294.63
E: 6057287.18
Pt# 715 (Stake point from a DXF file)
N: 254.39
E: 218.59
I built my drawing from the civils. I wanted to check the points that the surveyors are staking with a DXF file. As you can see from the above two points, our coordinates were wildly different. I brought the DXF file into my drawing as a block, and translated and rotated it to match my drawing. I had to drag it several miles, but no problem there.I imported the as-staked point file to a new group and dragged them up near my drawing, but the drawing was getting a bit crowded by then. So I made a block of all the imported points to make it easier to translate and rotate them to match my drawing and the overlayed DXF. After exploding the block of points, the points showed up in the new group. Anyhow, here's my questions:
1. How do you renumber(offset number) imported points? The option I saw was only for duplicate points. I wanted to offset them all.
2. How do you translate and rotate a large bunch of points without turning them into a block?
New to AutoCAD. Designing a building in plan. Then used the plan to draw a section in new layer, but still in plan view. Is there a way to copy that section onto a new layer in front view and erase the old section layer? .
View 1 Replies View RelatedI have Autodesk inventor standard NOT the pro version. I am a Revit professional in dire need of learning Inventor. My exact steps are as follows:
1. Open assembly
2. create component - (simple wheel(cylinder) with an off axis hole in the middle so I can see if it is rotating.)
3. create component- flat surface.
4. constrain the cylinder to the flat surface via a tangent constraint
5. constrain the cylinder to the front edge of the flat surface via a mate constraint.
6. go to motion tab in constraint's, click rotation-translation, type in 10in for distance.
7.wheel does not rotate on surface like a wheel should. There is no affect of the surface on the wheel rotation.
In other words I want to get the circumference of the wheel to rotate 360 degrees as it travels pi*diameter of flat surface.
I have made a copy of AIA (256 Colot) Key style and renamed. Made some additions and modifications to my new layer key style. Where do I make this new key style the current style.
View 1 Replies View RelatedNot sure if this is a graphics card issue or not but I'm running autocad architecture 2011 and when I open the layer dialogue box none of the layer names, linetypes, colors and such show's up. The box opens fine, but I can't see anything within the dialogue box. The file that is currently open shows through into the dialogue box.
View 2 Replies View RelatedWhen I hover the cursor / pickbox over a line, in about 1 second a small box (approx. 1" x 1" on the screen) pops open immediately next to the cursor - which lists the Color, Layer and Linetype of the line. As you move the cursor around the screen, these little boxes are constantly popping open - which is very distracting. How do you turn off this feature?
View 2 Replies View RelatedIs there a way to operate an offset to an entire layer?
I have a layer that has all the trees in the area. I want to do an 8 foot offset of every tree that is plotted. But there is like 2000 trees. Is there a command to do them all at once?
I know how to add to the layer keys, and it seems to me that you can add a layerkey via the command line. Is this accurate or just wishfull thinking?
View 1 Replies View RelatedI'm importing dxf files from the structural engineering program RAM Structural Systems where my buddy down the hall is modeling beams/columns/ etc in 3d. Importing is not a problem but I would like to know if there is someway to map the layers from his dxf to come in on my layers in cad instead of having to go through and select each object and place in on my desired layer. RAM does use layers for each member. For example :
when he models a beam in RAM its on an SBM layer. Is there a way I can make that SBM layer come in on my S-Beam layer that I have setup in cad?
In short I'm trying to find a way to not have to go through each dxf he emails me and place things on the layers I want them on in cad. I was curious if there was a way I could make cad recognize. SBM layer will be mapped to my layer S-Beam when imported.