AutoCAD Architecture :: How To Disable Warning Notices
Dec 12, 2011
I want to know how to disable some of these pointless warning notifications. For example if I move something to a layer that is 'off' I get a notice that I am moving to a layer that is off and I then have to drag my mouse up and click 'ok'. I have been drafting for over 20 years and I know this and do not need or want this dialog Also, in the layer manager same issue, 95% of the time when I turn the active layer off I WANT to turn it off I do NOT need to waste my time telling the program, yes I want to turn it off or no I do not.
View 2 Replies
ADVERTISEMENT
May 6, 2013
How do we get rid of the warning message that pops up telling us that VBA is no longer installed. Since most us now are running 64 bit machines and have changed to .net programming. We do still use many Autolisp routines that work fine but give us that warning message anyway.
View 1 Replies
View Related
Dec 18, 2013
We are trying to run an automated process on incoming AutoCAD drawings. However, the process stops if a drawing has AEC object references, because the warning dialog opens (and the program does not deal with it). Is there a programmatic way to disable the AEC warning dialog for opening? Similar to turning off the Proxy warning? Perhaps a Registry setting?
View 7 Replies
View Related
Sep 12, 2011
When I was open an autocad file most of the time Im getting a warning box "contains macro", is it possible to disable this warning? and im not using any macro here then why this message is coming?
View 3 Replies
View Related
Jul 31, 2013
how to disable the "You have selected more than 10 files" warning in PSP X5. It's not listed in the warning preferences and as I work with more than 10 images every day it's a total pain.
View 8 Replies
View Related
Sep 4, 2012
while working in "UV Texture Editor" and i select the shape, i keep getting a warning down at the bottom that says "//Warning: Some items cannot be moved or rotated in the 3D view." how do i disable this warning? earlier, this message wasn't showing up, but i must of pressed something on accident and enabled an option somewhere. The rotation box up in the right hand corner is gone too.
View 1 Replies
View Related
Aug 21, 2012
Immediately after closing AutoCAD Architecture 2012 or AutoCAD MEP 2012 a yellow warning triangle with a black exclamation point displays. This happens every time AutoCAD is closed. However it is isolated to a few systems all of which were installed using the same deployment as the other systems that do not display this warning. AutoCAD performs as expected but displays this warning when closed.
View 9 Replies
View Related
Oct 8, 2010
I was using 2009 Architecture. I kept getting a message in the command line: "WARNING: Xdata tag 100 is missing" like hundred to 1000 times and while its scrolling through this same message in the command line I can not do anything but wait for it to finish. Not sure if a recent windows update has anything to do with it. I am using XP Pro. I have a Dell with 3GB of ram and a Radeon X300/X550/X1050 video card and am running dual monitors. I have an upgrade to Archtiecture 2010 so rather than reinstall 2009 I installed 2010. Unfortunately, same problem. In 2009 I seem to remember that it was more random. In 2010, it pops up when I do an xref reload.
View 9 Replies
View Related
Oct 11, 2011
For the past couple of months we have noticed we are loosing files on the save command with no warning or notice. When the drawing is saved and then closed we discover that occasionally the file did not save and the original version of the file is lost. Sometimes the original version gets saved as a bak file but not always. No warning message shows up to inform that the command was not completed correctly, it looks like the save took place.
Recently we switched to Windows 7, 64 bit machines. All three machines this has occured on match and are saving back to 2010 version. One of the machines is running a trial version of Architecture 2011, the other two are running network licenses of Architecture 2012 with Service Pack 1. The files being lost are all located on a server in the same folder structure, not in the same folder. That server is new and has some sort of mirroring set up to image files to multiple locations? This phenomenon has only been noticed to occur on saving a file from Architecture. We do save other file types to the same folders and have not noticed any going missing. To my knowlege the files never show back up (one of our IT staff suggested the mirroring might be causing a delay in the file showing up in the folder.)
View 4 Replies
View Related
Sep 9, 2011
Is there a way to disable the ability to Flip the swing orientation of a door so that a RH inserted door cannot be changed to a LH?
View 2 Replies
View Related
Nov 14, 2011
I'm using AutoCAD Architecture 2009. I xref a lot of floor plans underneath my new floor plans to trace different walls, roof outlines etc and ever since I started using the smart walls this has become a real pain. When I xref in a demo floor plan for example underneath my new remodeled plan the walls from the xref interact with the new walls and of course bring up all the error triangles.Is there a way to make the xref not interact with the plan that it is being place under?
View 3 Replies
View Related
Dec 26, 2013
My PSE11 won't open and I keep getting notices stating that it won't open with my verson of OSX (maverics) It goes on to say I may need to reinstall the application and updates. I have tried all of this and still can't get any results. There aren't any updates.
I might consider going to 12 but Adobe has omitted the Magic Extractor, something I use all the time and can't live without.
View 7 Replies
View Related
Aug 26, 2013
I have a few viewport on a drawing and when I hit Print I get the following warning:
" some viewports do not fit the right zoom conditions. Do you want to update them before plotting"
It then proceeds to print correct.
What is the reason for this error message and how do I get rid of it?
View 1 Replies
View Related
Dec 31, 2012
While opening the autocad file it is showng some warning & I dont know what is this.
View 2 Replies
View Related
Mar 21, 2013
I have a mass print script and I have it save then close the drawing after it's done printing each one. The problem is the script updates the mass properties and some times drawings just update when opened. So when it saves different "warnings" can pop up, which pause the script until the pop up is taken care of. The warnings are typically for saving other files like the ipt linked to a drawing or if the drawing was saved in an old version. Is there a way to just accept those while running a script so it does puase?
How I save and then close the drawing.
ThisApplication.ActiveEditDocument.Save
ThisApplication.ActiveEditDocument.Close True
View 9 Replies
View Related
May 20, 2013
See Attached.
Windows 7 Pro x64
Civil 3D 2014 HF1
Dell Precision T1650
i7 3770
NVIDIA Quadro 2000
SSD Boot
16 GB Ram
View 4 Replies
View Related
Mar 2, 2012
Now every dwg that is opened the dwg recovery warning box pops up. how do i turn that off?
View 7 Replies
View Related
Dec 22, 2012
How to get rid of this warning dialog:
It appears at startup. I recently installed software (Simtra PathPlanner) that works with AutoCAD that may have caused this.
Using AutoCAD 2012 on Windows 7 64-bit.
View 7 Replies
View Related
Sep 13, 2012
During an import event I get a warning message saying the Angle is out of Range. The .fbk text below is where the import is getting hung up, the red text is the specific line.
F1 VA 23211 260.52200 84.640 90.32060 "HWC1"
F1 VA 23212 260.10119 86.282 90.31600 "HWC1"
F1 VA 23213 261.27140 84.380 90.15160 "GS"
View 3 Replies
View Related
Aug 28, 2012
Running Inventor pro 2009 building simple fabrications and assemblies and it randomly shuts down without warning or any error code. This is happening regularly an dwith no apparent pattern or trigger.
View 1 Replies
View Related
Aug 28, 2013
I have no clue what this error/warning message means or why I am receiving.
c:program filesautodeskautocad mechanical 2012acadmamg3dim.arx cannot find a dll or other file that it needs.
View 3 Replies
View Related
Dec 17, 2012
Shortkey to turn off the warning and pop up messages? for instance, "one object has been changed to a frozen or turned off layer".
View 5 Replies
View Related
Dec 12, 2012
Getting a lot of message pop ups about not accessible dst file. In conjunction with this is constant slow down if the sheetset is open with the blue cursor wheel constantly thinking. If the sheet set is closed, this immediately fixes this.
Ruled out network problems as 2012 works fine. I believe this to be isloated to 2013.
View 2 Replies
View Related
Aug 15, 2012
I've been having a problem with my AutoCAD LT 2010 completely deleting files after I have saved them and closed them. There is no file in the recovery manager, no back up file, nothing. It has happened three times without warning and it always happens to files I've been working on for awhile and have opened and closed multiple times. Is there any way to recover these files and how do I keep it from happening again?
View 1 Replies
View Related
Jul 14, 2011
I created a Custom Coordinate using a predefined coordinate (Meter to Feet). Everything is ok except when I restarted Map3D, I get a warning message and I am not sure what I did or did not do to cause it.
View 1 Replies
View Related
Nov 16, 2012
Every time I export a C3D drawing to ACAD (command: _AecExportToAutoCAD20xx), I get this "error message"
There does not seem to be a real problem because I can open the exported drawing in vanilla AutoCAD OK, (although I do still get a proxy notice..?).
A few other older threads about this reveal no solution or confirmation that this dialog is a bug.
[URL]
View 1 Replies
View Related
May 10, 2012
We modeled parts in inches. We save as copy to an .STL file to get SLA prototypes made. The parts came back 2.54 times bigger than needed. Reason is the default setting for saving as .STL files is Centimeters.... Not sure why Autodesk did this....but yes I understand it's not their fault, we should have checked under options and changed it to inches.....we just assumed that you model in inches, it would save as in inches....See what happens when you assume....
View 5 Replies
View Related
Sep 18, 2013
Sometimes when loading some DWGs, I get this Warning (plaese see the French JPG capture) saying that maybe I could need : Korean, Japan, Chine, etc language module !
I would like to bypass this Warning automatically because I open these DWGs with a Script to do some automatic actions and I resave them ...
At the Warning question : Do you want to open --> YES
I don't think that I can control this warning (--> Yes) through a special System Variable !?
View 2 Replies
View Related
Jan 24, 2012
When I enter a Run File Name in the "Create Tube & Pipe Run dialog box I get the message "The path is too long. Try a shorter name." The name I entered is "Kappa 55 Suction Line", I also tried the Run File Name of "1" as a test and get the same warning message "The path is too long. Try a shorter name."
View 3 Replies
View Related
Apr 15, 2013
We use scripts a fair bit in acadLT & from the Desktop icon. The 2014 behavior has changed in that it displays a warning (screengrab attached) before allowing the script to load.
This is going to be a pain for users. I can't see a way to add a folder as a trusted source in LT.
View 9 Replies
View Related
Oct 30, 2008
When I try to run my hydrographs through a pond I get an error stating something to the effect of: Outflow greater than Inflow on Hydrograph 6 for the 50-yr storm.
How can the outflow be greater than what is flowing into it? How the program can calculate this.
View 5 Replies
View Related
