My PSE11 won't open and I keep getting notices stating that it won't open with my verson of OSX (maverics) It goes on to say I may need to reinstall the application and updates. I have tried all of this and still can't get any results. There aren't any updates.
I might consider going to 12 but Adobe has omitted the Magic Extractor, something I use all the time and can't live without.
I want to know how to disable some of these pointless warning notifications. For example if I move something to a layer that is 'off' I get a notice that I am moving to a layer that is off and I then have to drag my mouse up and click 'ok'. I have been drafting for over 20 years and I know this and do not need or want this dialog Also, in the layer manager same issue, 95% of the time when I turn the active layer off I WANT to turn it off I do NOT need to waste my time telling the program, yes I want to turn it off or no I do not.
View 2 Replies View RelatedWindows Explorer set to open image files with PSE11, but when I double click on image in WE it launches PSE11, but I then need to click on Open tab in PSE11 to get it into work window. PSE10 did not have this problem
View 1 Replies View RelatedI have both Photoshop CS5 and Elements 7 on my laptop, which uses OS Windows 7 64-bit. Recently I was trying to use CS5 and it keeps freezing on me and giving me an "Adobe Photoshop CS5 has stopped working" error. Since CS5 wouldn't work, I tried switching to Elements 7. When I double-clicked the icon, I got nothing but the swirly blue 'wait' circle. It won't open at all unless I try to open a PSD file, then the editor screen pops up for just a moment and I get another "has stopped working" error.
The only thing I've recently installed was an Intuous 5 tablet. Thinking that might be the problem, I tried uninstalling it but not only does the problem still persist, I can't re-install my new tablet because the installation software uses Adobe Projector and I get a, wait for it, "Adobe Projecter has stopped working" error. All my other programs are working fine, it's only the Adobe programs that keep giving me errors. I've tried restarting the computer and uninstalling and re-installing Photoshop. My system is fully updated, as are both programs. The error I get in the event log is this:
"Faulting application name: PhotoshopElementsEditor.exe, version: 7.0.0.0, time stamp: 0x48cff252
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec49b8f
Exception code: 0xc0000005"
I have not found how to open a jp2 image with PSE 8.
View 6 Replies View RelatedI was shown, and have read that to do this I have to right click on the file and select 'Open in Adobe raw' but do not have this option appear when I right click.I am using Elements 11.
View 6 Replies View RelatedI like to open the same RAW a second time on Photoshop 11.
Earlier in the Day it works to open the same file it a second time. I can open the Same Raw twice with different Setting. You know what i mean?
Since a few Minutes, it don't work. I reboot the Computer an Start Photoshop11 again. But i cannot open the same RAW twice. The Camera RAW Tool doesn't start if i like to open the Same file. I also cannot open the Same JPG twice.
I bought a Nikon D7000 and my elements 9 will not open the raw files
View 1 Replies View Relatedwhen i double click on my photoshop elements 2.0 logo notting happens,
View 2 Replies View RelatedI have recently bought a new Nikon D7100 camera . When I try to open some NEF raw files, Photoshop Elements 11 complains my camera is not on the Camerra Raw list. I have tried for hours and hours to see how to fix this ... I have done the usual look at the plug-ins etc - the plug-in states I haev version 7.4 - which according to the blurb means D7100 files should be Ok ... beginning to get a bit pee'd off now with Adobe......
View 5 Replies View RelatedI'm running Windows 8.1 (On a Mac) and just installed Photoshop Elements 12, but the Editor won't open. I already tried holding down the SAC keys to no avail.
View 2 Replies View RelatedI have downloaded the suggested plug in and still cannot open raw files in PSE 8.
View 4 Replies View RelatedI've been using Photoshop Elements 11 for several months with my laptop running Windows 8. All of a sudden today I can't open jpegs. I click "open," navigate to the picture I want to open and nothing happens. I tried holding down, Ctrl, Alt, Shift when starting the editor to reset preferences and that did nothing. I even tried going to Preferences and clicking Reset Preferences on next launch and that also did nothing.
View 1 Replies View RelatedI am using PSE 11. I just purchased a Nikon D610. I cannot open nef files.
View 1 Replies View RelatedI am aware of the way to open JPGs in the ACR module by being in the Editor, and going to File>Open and changing the file type to RAW. I find this to be terribly inconvenient, however.
Is there any way to open a JPG in RAW from the Organizer where I can actually see the files? With regular Photoshop/Bridge I can just right click in Bridge and open in RAW easily. But I can't seem to find a way to do something similar in PSE11? There has to be an easier way because going to File>Open and trying to figure out what file I need from a huge pile of files is not a very good workflow.
Elements 12 will not let me open my RAW files from my nikon d7100 camera? it says no updates available
View 4 Replies View RelatedI was just working on something about an hour ago, I know I saved it. But now when I try to open it, a message pops up saying: "could not complete your request becuase the file is not compatible with this version of photoshop." I understand that I should've saved as a jpeg too but is there any way I can get this back, I really don't want my hard work to go to waste and to have to start over! I am using Elements 10.
View 5 Replies View RelatedI am trying to post a picture in Facebook and error message " You dont have permission to open this file" appears.What?
View 1 Replies View Relatedwhen i open elements it defaults to editor.. I need to open organizer
View 4 Replies View RelatedI have recently purchased a Nikon D600 and elements 11 which doesn't open the NEF file.
View 2 Replies View RelatedCanon 70D camera software open images ok, byt Photoshop Elements not. Windows 8. Adobe DNG Converter 8.2 not work!! Are mast BY new adobe Elements 12?
View 10 Replies View RelatedI have a new Cannon 70D camera. I shot RAW photos this past weekend and downloaded the photos to my computer. I try to open them in Photoshop Elements 10 and I get a message that they are in the wrong format. My photos have .CR2 on them. Does this new camera require a upgrade in Photoshop?
View 3 Replies View Relatedhow to open raw files in elements 11
View 9 Replies View RelatedOlder versions of Photoshop Elements will. Is this an oversight or part of what seems like a plan to "dumb down" Photoshop Elements?
View 5 Replies View RelatedI recently purchased a new iMac and transferred all my software to it from my old computer. Photoshop elements will not open. The dialog box says "Check with the developer to make sure Adobe Photoshop elements Editor works with this version of OS X. you may need to reinstall the application. Be sure to install any available updates for the application and OS X."
My version is 10.8.4. The "Read Me" file says it requires 10.6 through 10.8.
So I attempted to uninstall it and reinstall.When I tried to uninstall I got a message that said it could not be uninstalled due to an error. I followed the directions to restart and try again... and again. Same message. At the bottom of the message was another saying if that didn't work to use a link to some Adobe "cleaner". When I clicked to download the "cleaner" I got a message that I had to UNINSTALL the Elements program before using it.
Next I tried to install Elements from the original disk and got this message: "Installation to case-sensitive drives is not supported. Please choose a different drive location to install." I just want to do a photo project as a gift for my parents.
I just bought PSE 11 and have installed it on my computer. I am trying to right click on a file and use the "Open With" option to open the jpg in the program. However, the program opens but not the photo. I can open files within the program by going to "File - Open" just fine. The program that is on the "Open With" list isn't the right one (it's Adobe Photoshop Elements 11 rather than PhotoshopElementsEditor.exe). However, when I try to browse to and select the correct file it doesn't show up when I get back to the "Open With" screen. I've tried uninstall and reinstall. I've also tried using the program on another user and it works fine there but I don't want to switch all of my info to another user just to open photos. Photos open just fine in PSE 9 with the "Open With" method.
View 11 Replies View Related......if it opens at all. laptop is above min spec for pse 10. sometimes it opens fine sometimes it gets to the selection screen and when you choose say ORGANISE, it shuts down sometimes it just doesnt open at all when it does it will only allow you to see a 3X2 view or lower in the organise screen, any more and you just get hour glasses this is a real bummer i have paid £100 for this and premiere which does the same errors that elements does i have been using elements since elements 3
View 1 Replies View RelatedWhy wont elements 11 open a eps file
View 1 Replies View RelatedI'm not able to open the "Create"-tab in elements 10 anymore. It onlys says "initializing" but nothing happens. I've tried to reinstall the application using the uninstaller, without success. I run Mac on OSX 10.8.2 What should I do?
View 4 Replies View RelatedI had to reboot my computer to factory settings and installed El 7 several times and editor will not open. Error message elements editor has stoped working. I have installed it in my sons computer and no problem.
View 3 Replies View RelatedWhen I try to open a file a message comes up saying: " Could not complete your request because an unknown or invalid jpeg marker type is found"
I can't open the file I was working on last night, but I can open the original image when I first scanned it in before doing anywork on it.