how to disable the "You have selected more than 10 files" warning in PSP X5. It's not listed in the warning preferences and as I work with more than 10 images every day it's a total pain.
View 8 RepliesWhere do I tell PSPx4 not to give me this warning?
"Because of the limitations of the specified file format, the saved file will be limited to a merged image. Would you like to continue?"
I have been through the Preferences / Warnings & Auto Actions and can see no place to set it. I resolved it in PSPX2 but I can't remember how I did it. I have compared the 2 version's settings & can't see any difference.
How do I disable, remove, destroy, the image tabbing (document) feature that is anoying as heck? I don't want tabs. Every time i enlarge an image (scrollwheel) or i drag an image close to the top of the workspace EVERYTHING gets tabbed again. I want to totally remove this feature.
View 10 Replies View RelatedI've created a script and bound it to an icon, then added the icon to the standard toolbar.
Everything works, but the script will (correctly) give an error message if it's run when no image is open.
The bound icon on the toolbar is always enabled, even if no image is open. Is there a way to have the icon disabled (grayed out) if no image is open?
In PSP X5 I usually keep my JPEG Compression Factor set to 2. Just occasionally, I find it reverts to the default of 20 without warning. I suspect it is when I use a a Ctrl+F12 Save Copy As or when I change Image Type (JPG/TIF/PSP).
I nearly ruined some photos of my new grand-daughter.
Since PSP has devolved into adware I would like to know how to disable those annoying ads for PSP x5. Checking the "don't show this again" box does nothing. Is the only way to get rid of the ads really to just stop using PSP?
View 1 Replies View Relatedhow to permanently turn off Corel's photo downloader?
View 4 Replies View RelatedEvery time I insert a USB stick or CD or DVD which contains image files I get a popup window asking me if I want to download those files.
I know that I can disable this annoying window by running MSCONFIG and then selecting STARTUP and then unselecting CorelIOMonitor and Corel Photo Downloader but is there another way of disabling it (as I really prefer not to change STARTUP.
Instant Viewer persists in opening images that are not associated with PSPX3 & then will not close - requires Task Manager.
View 5 Replies View Relatedhow to disable - Content menu (menu on right mouse click in Explorer) - Browse with Corel PaintShop Pro X3/X4 ? I do not use this "feature".
View 8 Replies View RelatedHow do we get rid of the warning message that pops up telling us that VBA is no longer installed. Since most us now are running 64 bit machines and have changed to .net programming. We do still use many Autolisp routines that work fine but give us that warning message anyway.
View 1 Replies View RelatedWe are trying to run an automated process on incoming AutoCAD drawings. However, the process stops if a drawing has AEC object references, because the warning dialog opens (and the program does not deal with it). Is there a programmatic way to disable the AEC warning dialog for opening? Similar to turning off the Proxy warning? Perhaps a Registry setting?
View 7 Replies View RelatedI want to know how to disable some of these pointless warning notifications. For example if I move something to a layer that is 'off' I get a notice that I am moving to a layer that is off and I then have to drag my mouse up and click 'ok'. I have been drafting for over 20 years and I know this and do not need or want this dialog Also, in the layer manager same issue, 95% of the time when I turn the active layer off I WANT to turn it off I do NOT need to waste my time telling the program, yes I want to turn it off or no I do not.
View 2 Replies View RelatedWhen I was open an autocad file most of the time Im getting a warning box "contains macro", is it possible to disable this warning? and im not using any macro here then why this message is coming?
View 3 Replies View Relatedwhile working in "UV Texture Editor" and i select the shape, i keep getting a warning down at the bottom that says "//Warning: Some items cannot be moved or rotated in the 3D view." how do i disable this warning? earlier, this message wasn't showing up, but i must of pressed something on accident and enabled an option somewhere. The rotation box up in the right hand corner is gone too.
View 1 Replies View RelatedI'm trying to open a .tga image file with Paint.NET.
But instead of the actual image, I just get the grey-and-white transparency grid.
I can see that the image seems to be somewhere behind, because when I use the color-selecting tool on it, I can have the various colors of the image in the color window, with a 0 alpha-transparency.
Is there a way to disable this transparency so I can see the image and be able to modify it ? (I should mention that there is only on layer to that image.)
I have a rectangular screen grab (Windows application) that I would like to simply round the corners and add a border. The image is not a photograph, but since I have Paint Shop Pro X3 and like how it works, I thought I would try it . I have spent some time trying to do this with Paint Shop Pro X3 with no luck. None of the pre-defined frames seemed to do what I need. I would also like to create a drop-shadow behind the image. how to do this or a video that I can watch. A list of steps would also be OK.
View 1 Replies View RelatedHow can I create a 2D gray scale image from a color image?
View 1 Replies View RelatedI have an image of a map and want to create a number of individual images of that map each with a large white dot with a black edge (to highlight different cities).
I have created a separate image of the dot using both transparent background and normal background and then attempted to use EDIT>COPY the image of the dot and then EDIT>PASTE to the image of the map but no matter which PASTE option I use I cannot achieve what I want to.
Also (different problem) I lost my MATERIAL PALETTE. I noted that to restore it I could use VIEW>PALETTES and select MATERIALS but it was already selected. I also used the F6 key without success. I had to start PSP by pressing the SHIFT key when I started it to restore PSP to its defaults and then I could select and display it. So what stopped me from displaying it in the first place?
A client sent me four images taken with his Canon camera - they are in Canon Raw (.CR2) file format. I can't get them to open and then save them as a .jpg or a .pspimage format in either PSP9 or in X3. In X3, when I click on the pic, it brings up the "Canon RAW Lab" dialogue box, showing a black and white image but with a deep pinkish cast to it. And there is no options to save it. What do I do from here?
View 7 Replies View RelatedI am using PaintShop Pro X5 & PaintShop Photo Pro X3
I have an image which was originally made up of two other images side by side. They are both of similar colours and content but the dividing line between them is quite obvious. I don't have the original PSP files in order to use the selection and layer method of feathering them, so what would be the best way to get the pixels to blend across the join? I thought there was a tool in PSP to do this but can't find anything.
I have learned how to remove a background and how to save the resulting image as a PNG.
View 3 Replies View RelatedI have 2 gif images. On image2 I have erased the background so as all you see is the checkerboerd.I want to place image2 (the visible part) on to image1.
I'm sure I have done all the correct procedures but the #2 image will show either a black or white background when pasted on to image 1.
These are the rules I followed. To make one image color transparent
1. Choose Image Palette Set Palette Transparency. If you are prompted to reduce the color depth and number of layers, click Yes to continue and then choose the options for decreasing color depth.
2. On the Set Palette Transparency dialog box, choose one of the following options:
• Set the transparency value to the current background color — makes the background color transparent
• Set the transparency value to a palette entry — specifies a color to be transparent. Click the color in the image, or click the color box to select from the current color picker. If you want to view the transparency, click Proof.
3. Click OK. The color is now transparent; however, it may still be displayed until you hide it.
I have 3 images which I am looking for the best treatment.
a) Dark hair: the woman has an dark hair which is almost blended with the background. What to do to bring more definition to hair and to “separate” it from background?
b) Face light: one side of the man face (and body) is with much brightness, blending with his white shirt yet. Is there any way do correct it?
c) Spot of light: in a slice of a landscape there is a spot with much clarity/brightness. I would prefer to bring more blue from the sky then light. On the other hand, maybe there is any way to take benefit of the light.
Why is it necessary to have an image open before using the "Paste as New Image" function.
I want to be able to copy an image from another program and paste in into PSP for editing. I can only do this if I first open a new or existing image in PSP before doing "Paste as a New Image".
I go-image-resize-resample-unncheck resize all layers-set new value via % (tried 400%)-lock aspect ratio in a jpeg image.but not much happens, I want to try and double the size, where am I going wrong?
View 14 Replies View RelatedI have been using PSP since it was free shareware so I'm rather familiar with it. I just installed the PSP X4 14.1.05 When I open an image in the "edit" area and have the move tool chosen the image goes to "Fit image to Window" and both "Fit window to image" and "Fit Image and Window to Screen" are grayed out. I have tried the preferences and all else I can think of but can't get the window to fit to the image as it always has so I can be viewing several images at a time and working with them. I did try reinstalling. This is a Vista machine.
View 3 Replies View RelatedAfter I resize an image with Paintshop X4 the image on the work area is so tiny, like 1" X 1" I'm talking a 2000 X 2000 pixel image. How do I prevent this?
View 14 Replies View Relatedwhen I choose View then Customize then lets say open the drop down menu for Image, the right-click say Resize I see the following...
Reset to Default
Copy button Image
Delete
---
Button Appearance
Image
Text <-- Greyed out!
Image and Text
---
Star Group
Why is IMAGE option greyed out? do I have to place images in special folder and in what size and format?
I'm having an issue with loading a photo into PSPx5. When I go to 'Open' and click on a thumbnail in a folder. Some/most times the thumbnail preview loads in a second or two. Then I can open the file. However every now and again I get a very long wait, 20-40 seconds, before the thumbnail loads. All files are approx 90 meg so it's not a file size issue. Just some thumbnails taking forever to load in the small preview window.
View 5 Replies View RelatedNew version of PSPPX3U. There are 2 problems which I find most upsetting.
1. I open an image, 256 x 128 in size and create a new image 768 x 128 in size.
I click on the 256 x 128 image to bring it into focus and Ctrl+A to select the whole image, and Ctrl+C to copy the whole image.
Then I bring the new image into focus, then Ctrl+E to place the copied image at the left side, the image covers the 128 area perfectly.
Once the image is placed I Ctrl+G to deselect the image, the image shrinks to leave a 3 pixel uncovered area on the bottom.
2. Let's say there are several images open and I want to close one of them, so I right click on the image name to open the tool menu.
Rather than giving the option to close that particular image, it gives the option to close all images.
But going up to File, I am now given the option to close that particular image.
Which is ars-backwards.
My system specs:
My PSPP3XU version : 13. 2. 1. 20