In PSP X5 I usually keep my JPEG Compression Factor set to 2. Just occasionally, I find it reverts to the default of 20 without warning. I suspect it is when I use a a Ctrl+F12 Save Copy As or when I change Image Type (JPG/TIF/PSP).
I nearly ruined some photos of my new grand-daughter.
I've been using PSP since decades, currently I'm using the latest PSP X5.When I open a .jpg/.jpeg file and without changing anything on picture hit File-->Save or CTRL-S or the Floppy on the Toolbar, any picture is overwritten with a certain compression factor of about 15 (but not exactly). If I go over the File-->Save As..or F12 function, I can choose the compression factor as I want (f.ex. 5) over the options, it will be retained forever, until I change it manually, what is perfectly ok.
I'm quite sure, it wasn't always like this, but since some versions it is. I think earlier the factor I choose on "Save As..." was also used for "Save". But a mystical compression factor is used, which can't be reproduced manually: 15 is a notch bigger but about the closest.
Question:Can I set the default compression factor somewhere, I don't want to make the whole procedure over "Save As..." every time, I just want to open an image, edit and click "Save" with a compression factor of let's say 5. Anything for achieving that is acceptable, like modifiying Registry settings or editing config files to the HEX Level. A lot of googling and searching in settings didn't solve my problem yet.
I use very many features of this great program and plugins and stuff, but it turns out, the only problem I have with it, is about the most basic function.
The PSP X4 that I have compresses jpegs to an extreme amount even when set on compression factor 1. (a 4000 kb jpeg gets compressed to 1900kb. The previous versions would not change the compression when you open a file and just save it without changes. This one cuts the file size in more than half.
I really like some of the new layout and features, however my clients won't accept a jpeg that is compressed that much. Any other setting I need to change to stop this?
how to disable the "You have selected more than 10 files" warning in PSP X5. It's not listed in the warning preferences and as I work with more than 10 images every day it's a total pain.
View 8 Replies View RelatedWhere do I tell PSPx4 not to give me this warning?
"Because of the limitations of the specified file format, the saved file will be limited to a merged image. Would you like to continue?"
I have been through the Preferences / Warnings & Auto Actions and can see no place to set it. I resolved it in PSPX2 but I can't remember how I did it. I have compared the 2 version's settings & can't see any difference.
I'm running PSPX3. the effect of no compression (or compression factor = 1) on saving files. I've got a JPEG image file straight from my camera that's approximately 4.1MB in size. If I do nothing else but "Save As" with a compression factor of 1, the new file size is approximately 50% larger, or 6.2MB. What has changed to make the file size larger? Both images are still 72DPI, 3648X2736px. I can't image that I have done anything to "improve" image quality, so why did the file size increase?
View 14 Replies View RelatedWhen using mtext and a background mask and try to modify the border offset factor from the default of 1.5 , the factor reverts back to 1.0. If I type in 1.25 or 1.75, it will not save it and revert to 1.0. If I put in a larger number like 2.0 or 3.0, that factor will be retained.
View 4 Replies View RelatedI've done batch processing before, but unsure of how to simply change the jpg compress on all files in a root folder (with subdirs). I guess I'm stuck in not knowing how to set the compression since this is done in the saving of the file and not really the script part.
View 2 Replies View RelatedI am doing a lot of saving new files over old ones. I am sick of the warning message that pops up having a default answer of 'NO' when I go to replace the files. Is there a way to change the default to 'YES' , or get rid of the message altogether?
View 1 Replies View RelatedJust came upon an error I had not seen before. Though PSP no longer supports Animation Shop, up until PSP X4, the user has been able to export frames back to PSP from Animation Shop. Now, this no longer works! There's still some communication there, because an error message - which, incidentally, makes absolutely no sense at all - is generated in PSP X4:
View 2 Replies View RelatedI installed PSP X4 today on a new PC with Windows 7 and noticed that it has no Animation Shop. Can I install Animation Shop to this machine? Will it work without PSP 9 or does it need certain dlls from PSP 9 ? I really want to be able to use Animation Shop again.
View 7 Replies View RelatedIs there a Print Layout in X5 similar to that in Paint Shop Pro?
View 1 Replies View RelatedMy program worked just great, then all of a sudden the paint brush and eraser will not do a thing.
View 14 Replies View Relatedif is possible to create the paint drips in the attached design. I really want to learn how to create urban designs, is corel paint shop x3 suitable for that?
View 2 Replies View RelatedI want to use the paint brush for editing a photo I have, but the only color available is black. No matter where I've looked in PSP, there was no option to change the color of the paint brush. I've read online that you need to change the pallet to material pallet, then go to "Foreground & Stroke Properties" and set the color box to the color I want, but the only colors I get are different hues of black and gray.
Even in Paint it's just a matter of clicking the desired color to use different colors. Why isn't it so simple in PSP?
Ok, either I am totally loosing it, or it just ain't happening.
I cannot get the Nik HDR module to work with my PSP X5
It's installed, it shows up in my Effects menu, but it only imports one of the photos I have opened in my edit tab.
What am I missing??
Using PSPP X3 Ultimate.
I have some Tif files and jpeg files that are 600dpi and 400dpi. I scanned these images with my Canon CanoScan LiDE 700F scanner. Can i use my version of PSPP X3 Ultimate to change the dpi value? Is this stuck? I wanted to be able to get the 600 and 400 dpi image files (I have some 300dpi's too) down to the 100-250 range if I needed to. I see there are different export options and compression in PSPPX3Ultimate, but I'm not sure if this will do what I want.
I want to export as Tif and Jpeg again.
Are there any good third party photo and or video editors that I can batch edit this with? It's ok to mention pay programs and I'd prefer good quality freeware if there is such a thing. I am sure that my Corel program can do the trick though. I just don't know how and don't want to rescan multiple dpi's every single time. I only need the archives and then get the smaller dpi when needed.
I was using a trial version of paint shop pro x5 and still had 11 days left of my trial when it suddenly stopped working. When I click on the icon to start paint shop pro it starts up and then freezes every time when it is loading in the spot that says "initializing color swatches".
I haven't changed anything on my computer- it just suddenly stopped working. I uninstalled it and tried reinstalling it, I also tried restoring it.
I installed PaintShop Pro Ultimate X3 several months ago. It worked fine initially, but then stopped running and gave me an error message pertaining to a language error. In an effort to fix the problem, I have completely uninstalled the application and removed all of its registry entries. I then reinstalled the program, which appeared to be successful, however, now it simply will not run and gives no error message whatsoever. When you click the desktop icon, it tries to load momentarily, then does nothing more.
I have removed my virus protection and my User Account Control.
What is the best method to upgrade from X3 to X5...should I remove X3 first for example?
View 2 Replies View RelatedDuring preparing a collage, when I try to save the project, I receive the the message that I don't have enough memory.I am using windows 7 and as far as I know, I don't have memory problems. I am working a lot with VideoStudio x4 without any problems.
View 5 Replies View RelatedI would like to add some Plugins to PSPPX3, I read/understand i should add the Plug-ins path at Preferences>File Location>Plug-ins - But there is no such option or Preferences>Workspace>Plug-ins - Same story
There was also no Plug-ins map or Workspace map in: C:Program FilesCorelCorel PaintShop Photo ProX3PSPClassicLanguagesNL
I installed PSPPX3 today, and i updated it and downloaded patch 1-4. How / where to install plugins?
When I open a jpeg in X4 it always says it is at 72 dpi. Even when I resize it so it is at 220, when I open it again and look under image information it always says 72 dpi. If I open the same image in any other editor, including X3 it reports the correct dpi. This coupled with the extreme compression is making X4 useless to me unfortunately.
I'm not prepared to sit and do the math to try and figure out what it is really at.
I have reset the number under preferences/general program preferences/units and it doesn't respond to that either.
For me, this version is problematic and not worth taking the time to learn. I need to be able to depend on and trust the information I'm getting from my software.
I normally upgrade every other version. I currently use X2 on a Windows XP computer. My primary uses are photo editing. My key interests are:
- processing 16 bit per color files
- use of layers and blends
- stereo photography (combining and aligning stereo pairs)
- use of various tools such as cloning and healing.
- Color management and Printing
Reviewing the product page, I haven't really found anything that shows a list of upgraded or added features. Most of the things mentioned appear to be in X2 already. Looking at the thread calling for future features, it appears that the things missing are still missing. X2 is serving me well, but there has to be some reason to upgrade?
I have a trial version of PSP X6. I'd like to move and use my workspaces from X5. I've tried everything I can think to do: point to the X5 workspaces folders, copying the X5 workspaces to the X6 folder, adding the X5 folders in the File Locations Preferences, etc.
View 1 Replies View RelatedI was wondering if I was able to get the Nik Effects that came with X5 into the new X6 download?
View 1 Replies View RelatedI understand you cant tag Raw Files . But tags have been put on some raw files on one particular date, the tags are incorrect tags but when i try and remve tags it says the software doesnt support it.
View 1 Replies View RelatedUsing RAM Disk to speed up performance in Paintshop Pro? I like what I've seen so far except the program seems very slow. I have 32GB of RAM and have created a RAM Disk. I can manually copy images to the RAM disk, then work on them, then save them to the hard disk when done. Is there a way to make this automatic. I've set my temporary files to the RAM - trust this does not mess things up for Paintshop as those files disappear when I shut off the computer - but ain't that the intent of "temp" files. I'm going to try to set the Cache to this RAM as well.
Tried going to preferences and enabling the Scratch to my RAM disk (R:) but would not let me do that.
I am a beginner with PSP and would like to get some hints on the following two tasks:
- When I have two .JPG files, how can I form a PSPX3 picture with the contents of the two files arranged side-by-side which I can then store as a single .JPG file (this is the kind of picture I want to show at a presentation)
- When I have one .JPG file, how can I construct a PSPX3 picture that consists of the contents of this file (say, in the left half) plus a free space of the same size right adjacent to the loaded picture where I can add some text items?
Maybe even a suitable hint to where I find the steps to perform these tasks in the user manual (and how they are called in PSP terminology) would be a first step to find a solution (you need not copy the user manual!).
I need to put a title into a book which is not "face on". With the freehand selection tool I´ve found out that after using "pick" and pressing Ctrl I can play around with the text. However, I want to be able to use a parallelogram shape but haven´t got a clue how to arrive at it.
View 2 Replies View RelatedJust loaded PSP-X3 and when I load a photo onto my workspace i cannot get the marquee (I guess that is what it's called) to move the photo around or minumize it. that bar at the top of the picture I am used to in PSP9 that has the min, max, close icons.
View 3 Replies View Related