AutoCAD Architecture :: Clip Images Multiple Holes?
Dec 13, 2011
would I be right in saying that an image placed into a drawing can only have one closed polygon clipping boundary?
Imageclp/ clip/ xclip seems to only offer to choose one polygon as boundary and then I can choose whether the image is displayed inside or outside the boundary (invert clip).
Any methods of masking more than one area of the image?
We don't want to use "wipeout" as this caused issues with certain printers printing the wipeout in pitch black.
View 2 Replies
ADVERTISEMENT
Nov 16, 2011
Is there a way to edit multiple holes of the same kind.,or do i have to change each one seperately.
eg. Plain Holes To Tapped Holes
Iv 2010
View 6 Replies
View Related
Jan 6, 2012
I'm trying to assemble two parts, each of which has four matching bolt holes.So I do a "mate" between a hole on one and a hole on the other. This works fine, and the parts now behave just like two parts bolted together with one bolt - one can be rotated relative to the other around the bolt hole. So there is one degree of freedom left to be constrained.
But the obvious ways to constrain that one last rotational constraint result in overconstraint. Trying a "mate" between the circles at the ends of the corresponding bolt holes breaks the first constraint, and the non-grounded object "jumps". Trying to auto-mate the two holes results in the holes being constrained as tangent, with the holes not lined up. I've tried constraining the center points of the end circles of the holes. That doesn't work right either.
Doing the second constraint as "tangent-inside" does work. That's a 1 DOF constraint, which makes sense.It took me a while to figure that out. The help files aren't very useful when multiple constraints are involved.
View 9 Replies
View Related
May 3, 2012
I am trying to place a cross dowel into multiple holes. Is there an easy way to automate this? Currently I am placing a cross dowel component and then constraining it to the hole one at a time. Quite a long process to place hundreds of them.
View 2 Replies
View Related
Apr 8, 2013
I need to create a adaptor to go from one 96 hole array pattern to a smaller 96 hole array pattern. The pattern gets smaller in both X and Y. This would go from vertical hole to angled hole back to vertical hole. One or both of the vertical sections could be removable to allow this to be a drilled part. The center section would be a solid block.
Since each hole will be at a different angle (in two different planes) it seems like I would need to create a separate plane for each hole and extrude from that plane. In addition to being error prone, this would take a large amount of time. Is there an easier way?
It would be straightforward to create a block with points for the large 96 hole array on top and the small 96 hole array on the bottom. Is there some kind of point to point method of creating a hole at an angle? A construction line could be drawn point to point but is there a way to make a hole from that?
View 9 Replies
View Related
Nov 4, 2013
I am working with a part that needs multiple 9mm gun drilled holes to different depths. The problem I am having is not being able to create a truly custom single line hole callout. Example( DIA 9mm +.50mm -.00mm TO DEPTH 1.25in)
I understand that this isn't a common hole callout but in my situation it is what is needed. The values need to be linked to the part and not simply overridden as text. I am essentially wanting to make a style that I could apply to any hole note that would give the hole diameter a metric dimension and the depth an inch value.
View 4 Replies
View Related
Aug 8, 2013
I'd like to use boxes to punch holes into the layered artwork below them. I want the result to look exactly like this image, but with the white boxes being transparent holes.
This seems so simple, but I can't find any combination of layers/pathfinder tools/compound shapes/or clipping masks that will produce this result. No matter what, I end up losing part of the artwork (usually the topo lines and the black bar).
View 4 Replies
View Related
Nov 24, 2013
How can I add multiple titles to the same clip, but enter the clip at different times ..?
I am trying to add a title by having "____ production presents..." (fades out) (fades in) "Title of Movie"
View 6 Replies
View Related
Feb 19, 2014
I have a project which requires a lot of different edits from the same clip.
Is there any way to do this without having to duplicate the same clip each time and then making my new edit?
For instance -
Clip 1 is 20 minutes long.
My first edit is from 1:10 to 1:35.
I then duplicate Clip 1 and make another edit from 2:40 to 3:55. I'm using Premier CS5.
View 5 Replies
View Related
Nov 2, 2010
I have a video clip in VS and i wanted to cut it up every .5 seconds. How can this be done easily?
Is there a way to merger to clips so that they cut back and forth every 5 seconds?
View 2 Replies
View Related
Jun 19, 2013
I'm new to After Effects and struggling just a bit. I tried searching this forum but found no obvious reference to my question. I have figured out how 3d Tracking works for a single object, but don't know how to handle multiple tracked objects on the same video clip. How do I go about tracking more than one object or Text Object in the same clip?
View 10 Replies
View Related
Jul 24, 2006
I can clip images easily and getstraght lines.
is there a way of clipping a pic using some kind of tool that will cut curves?
and then move the clipped pic say into another window?
View 1 Replies
View Related
Apr 22, 2011
I have just upgraded to X5 from X3.
I have got the Connect docker up but I can't see the content.I have opened the folders but the files are just white squares...... If I drag one onto the workdesk then the image appears.Photos and Objects work but can't see the clip art images
View 14 Replies
View Related
May 24, 2013
can Corel VS Pro X5 (or X6) convert video clip frames to images ( .bmp, .tif, ...)? Also can convert images to video clip frames?
View 12 Replies
View Related
Oct 6, 2012
I have a series of pics (approx 80) that I'd like to load into Elements, with each photo going into a single layer. I google'd a series of old posts where somebody used a "script", but the links are no longer working and that trails is dead.
View 9 Replies
View Related
Mar 5, 2013
ACA2011.I've got a construct that for some reason has 2 xrefs listed within it that I can't detach. It says that it is unresolved and when I try to detach it it says "c_Floor Plan - First" has multiple references, Not detached." This is one of two xrefs in the drawing doing this...how is it possible to have an xref of the same name in the drawing? I can't figure out how to detach it. It was causing problems in the view to which it was referenced, and I solved it by creating a bogus, blank construct called "test" and changed the path of the xref in the construct to this drawing...but I still can't detach it.
View 2 Replies
View Related
Mar 25, 2013
I have a building with 2 levels & I have one stairwell. My 2 levels are in a shell.dwg - (first floor level & second floor level). I have a simple stair & landing, which is an element. I insert that element into the first floor level. Everything is fine there, but when I set up a view drawing with the shell (construct) & stair (element in construct) for the second level the stair is diplayed as if it is going up from the first floor level - I need it to show going down from the second floor level. Is there way to show that with one stair?
What we have done in the past is to not have levels, 1 construct for first floor & another for second floor - creating a stair styles for each floor. But when you do a model you have stairs on top of each other (not really using the software like we should). So my question is how do I have 1 stair for 2 different levels & show it correctly for each level. When I set my cut-plane height for first floor level - looks great, but when I set it second floor level - either it remains the same obviously or when I uncheck the override display config. in other on the display tab in the style the stair disappears. I'm trying a new way of creating models/plans & I can't think on how to create the stairs correctly. What am I missing in order to look correctly in plan view without making 2 stairs.
View 1 Replies
View Related
Apr 11, 2011
We would like to have everyones workspaces on each computer. So if I have a problem with my computer and Bob is gone, then I can work on Bob's computer with my workspace. Then Bob can come back and switch back to his workspace.
Where do I find the workspace, so I can copy it to the other computers?
View 5 Replies
View Related
Feb 24, 2012
my teachers wants to know how to make multiple floors for a building.
View 2 Replies
View Related
Dec 3, 2012
I've been having problems selecting images in the library module when multiple images are in view (not down in the timeline, but in the main window). It seems sporadic with which ones it won't let me select, it somehow manages to be the ones that I need to click....!! I just literally can't click it as if it were an image I already imported or something, but it's not grayed out like that. I've been having to select a nearby image then use my arrow keys to navigate to and click the image I need.
View 2 Replies
View Related
Jun 27, 2012
We run a Canon ipf655... and as far as I can tell, it won't collate by itself - it gets its information from whatever application one's running. In this case, we are running Autocad 2013. I am trying to figure out a way to print an entire job (say, 30 sheets) without having to open up each and every page and print singly. That's what we do now, and apparently have done for the last 15 years; so if my boss requests a copy of the yadda yadda set from 6 mos ago, we have to go back, open up the cover page, open up every other page, and print them in order.
Is there some way to either save all these individual pages as a "job" or something and then print that "job", or otherwise to instruct the program to print 30 pages in whatever order? Each page is definitely set up differently, with different scales and window sizes and such, but it seems like once each page is set up to print properly, one should be able to print a slew of pages without such painstaking time spent.
View 5 Replies
View Related
Jun 3, 2011
Is there a way to copy a viewport with all its layers setup from one drawing file to another drawing file?
I can copy the viewport and activate it, but the layers setup for that viewport goes to default. So it turns everything on.
I can't make a layer state in the old file and import in new file, because the new file does not have all the same layers. So not all my layers would be turned off in the viewport.
View 4 Replies
View Related
Mar 16, 2012
I've got a multi-family building where I'm trying to create a schedule tag that will number walls sequentially in a view drawing. The units are elements that are then brought into a construct and mirrored and rotated as needed.
The first thing I did was to create a Property Set that uses Level and Manual property set that automatically increments to create a property called Unit Number. Then created a tag that will number the units in my building i.e. : 201 202 etc. This works fine.
I then created a Property Set to apply to the walls that uses the Unit Number from the other Property Set along with a Manual Property Set that increments as well to create a wall tag. What I am expecting to get is 201-01, 201-02 etc. What I’m getting is ?-01, ?-02 etc.
View 7 Replies
View Related
Apr 4, 2011
I need to have 4" piers ont my exterior wall. We are will be using 12" cmu at the piers with 8" cmu at the typical wall with 2" insul wrapping around it all. I am trying to use wall modifier to do this.
View 4 Replies
View Related
Mar 14, 2012
Any way to add all the areas of a space style to get a total SF#? Is there a way to add this information to a display theme style legend?(preffered) Is there a way to get this information in to a schedule? (less desirable)
View 1 Replies
View Related
Nov 12, 2013
I've been looking through old threads on here that all seem to date back to 2008 for this same problem I'm having, but the way to fix them only seems to work for Windows XP and I'm currently on Windows 7.
Problem:
I'll have a session of ACA 2008 running and if I double click on another dwg file it starts up another session of ACA instead of opening within the current session I'm already running. My SDI setting = 0. I tried switching it to 1 and that didn't work. Put it back to 0 and still didn't change anything.
One of the older threads on here [URL] .... says to go in to windows explorer/ tools / folder options, but that set up is different now in Windows 7 than it was in XP so I can't get to Files Tab and change anything for dwg.
View 5 Replies
View Related
Aug 4, 2011
I know Ribbons have been out for a while, but I just finally updated to ACA 2010 from ACA 2008. Why these ribbons are suppose to be so much better. I can obviously re learn where everything is... but it takes multiple steps to get to a command that I used to be able to access in one click.
View 9 Replies
View Related
May 12, 2011
I have a schedule on a drawing and they used blocks for all the text. I want to change all the letters to uppercase.
View 4 Replies
View Related
Jul 19, 2013
I'd like to change multiple doors ( & multiple styles) so I can close them all. Is there a way ?
I think you can only change them in "properties" if they are all same style.
View 1 Replies
View Related
Aug 21, 2013
We recently purchased the bldg design suite premium, so we have autocad, autocad mep, autocad structural detailing, and autocad architecture.By default, .dwg files open with the vanilla autocad application. How can we change the default program for .dwg files to autocad architecture?
View 5 Replies
View Related
Nov 27, 2012
Is there any way to change the msltscale variable to 1 and the scale to 1/4"=1'-0" in multiple drawings without opening each and doing it all manually?
View 9 Replies
View Related