Photoshop :: Clip Images To Get Curves
Jul 24, 2006I can clip images easily and getstraght lines.
is there a way of clipping a pic using some kind of tool that will cut curves?
and then move the clipped pic say into another window?
ADVERTISEMENT
Photoshop :: Use Of Curves BETWEEN Images
Mar 21, 2006I am stumped with this problem and havn't found a thread that seems to give me a points in how to simplify the procedure/problem described. Is there a plug-in ?
I am using PS7.0 and am at the beginner end of the spectrum.
I have TWO pictures and want to duplicate the colour values at certain points in the picture. The manual operation would be to:
1) Open Picture #1, put colour samplers in at the points I want duplicated (max 4) and write down on a piece of paper the RGB values at those points. I make the assumption that the points are all present on the Picture #2 and that the tonal values are all different enough that they fall on different parts of the tonal curve. ....
Photoshop :: Adding Curves To Images
May 27, 2009I have opened a jpeg image in PS and want to add curved corners to the top left and right corners of the image.
View 2 Replies View RelatedPhotoshop :: Curves Adjustment Layer In CS3 To Brighten Images And Increase Contrast
Oct 25, 2012Adjustment layer- curves. I have always used a Curves Adjustment Layer in CS3 to brighten images and increase contrast. I have just upgraded to CS6 and when I open the adjustment layer and try to Command Click choose points in the photograph to drag the line up or down to darken or lighten I get instead some crazy saturation changes.
View 4 Replies View RelatedGIMP :: Smooth Curves Of Enlarged Images
Oct 20, 2012Enlarging an image results in pixalization becoming very obvious. Is there a way to smooth the curves of the enlarged image?
View 2 Replies View RelatedGIMP :: Curves Spline Batch On Set Of Images (2011)
Feb 10, 2009I am attempting to set up a batch that automatically runs gimp-curves-spline on a set of images. However, I have never used Scheme before and therefore am not sure why my script is returning "batch command experienced an execution error"
Here is the command I am using to call the script(via a windows .bat file)
gimp-2.6.exe -i --verbose -b "(color-curve "C:\gimpbatchtest\*.tiff")" -b "(gimp-quit 0)"
And the script itself:
(define (color-curve pattern) (let* ((filelist (cadr (file-glob pattern 1))))
(while (not (null? filelist)) (let* ((filename (car filelist))
(image (car (gimp-file-load RUN-NONINTERACTIVE filename filename)))
(drawable (car (gimp-image-get-active-layer image))))
(gimp-curves-spline RUN-NONINTERACTIVE image HISTOGRAM-VALUE 3 '(0 0 64 200 128 46))
(gimp-file-save RUN-NONINTERACTIVE image drawable filename filename)
(gimp-image-delete image)) (set! filelist (cdr filelist)))))
Photoshop :: Craze Curves / Visibility Curves Technique?
Feb 23, 2013I am preparing a batch of images for test submission, for a stock photo library.Recently a person working for one of the visual effects studios in London happened to tell me that these strict agencies use some set of layers that can separate tonality and color values to check for banding, dirtiness, noise and all those technical flaws that the human eye can't notice on a monitor.He said they perhaps have an action for it so that they can review faster.
He said that it is known as 'Craze Curves' or 'Visibility Curves' technique.He further added that all the studios use it before giving the final files to clients so that there is no issue in printing afterwards.It is sort of a quality control check and has been used by digital and advertising agencies all over the world.
But now his email seems to have changed and I can't get in touch with him to know how to use the technique.
CorelDRAW Graphics Suite X5 :: Can't See Clip Art Images
Apr 22, 2011I have just upgraded to X5 from X3.
I have got the Connect docker up but I can't see the content.I have opened the folders but the files are just white squares...... If I drag one onto the workdesk then the image appears.Photos and Objects work but can't see the clip art images
VideoStudio :: Convert Video Clip Frames To Images?
May 24, 2013can Corel VS Pro X5 (or X6) convert video clip frames to images ( .bmp, .tif, ...)? Also can convert images to video clip frames?
View 12 Replies View RelatedAutoCAD Architecture :: Clip Images Multiple Holes?
Dec 13, 2011would I be right in saying that an image placed into a drawing can only have one closed polygon clipping boundary?
Imageclp/ clip/ xclip seems to only offer to choose one polygon as boundary and then I can choose whether the image is displayed inside or outside the boundary (invert clip).
Any methods of masking more than one area of the image?
We don't want to use "wipeout" as this caused issues with certain printers printing the wipeout in pitch black.
VideoStudio :: Selecting Clip Goes To Front Of Clip?
Oct 11, 2011When I select a clip, it then goes to the start of the clip, how can I sop this happening and the clip stays in the same position when selected.
View 5 Replies View RelatedPremiere Pro :: Turn 15 Fps Clip Into 30 Fps Clip Through Adobe?
Mar 27, 2014Not sure if this is possible, but is there any way to turn a 15 fps clip into a 30 fps clip?
View 3 Replies View RelatedAutoDesk Smoke :: Put CFX Clip On Top Of The First Clip
Nov 22, 20121. I put a clip in a timeline , then i put a cfx clip on top of the first clip. Add axis clip to cfx clip, set transparancy to 100% (fully transparent) , when hit render , this cfx is still calculated.
2. if i have stack of cfx clips, the clips are solid (no matte or transparancy ). one clip is on top of the other. In the top layer , i add a axis fx and cut a very small hole. We can see even a very small hole ( that will exposed small part of the bg ) will trigger smoke to render both of the clip full frame. Actually i only will see small part of the BG so i'm expecting smoke to render only that visible pixel. How to control this ? In some case i will waste my time waiting smoke to render part that i don't need.
Photoshop :: How To Use Curves
Jul 3, 2008how to use Curves, in CS3.
View 6 Replies View RelatedPhotoshop :: Get Bezier Curves In CS6 To Act The Way They Used To In CS5.5?
Jun 26, 2013How do you get bezier curves in PhotoShop CS6 to act the way they used to in CS5.5? In 5.5 i would be able to move/adjust the path with the direct select tool and the control arms would stay at the angle they were created at. In CS6, depending on where you direct selected the path, would depend on how the path could be/would be adjusted. And the control arms have become more fluid, rather than static. They do not keep the angle they were created.
View 2 Replies View RelatedPhotoshop :: CS5 - Get Percentage Value In Curves?
Jul 30, 2013How do I get a percentage value in Curves-in CS5 it used to be command-click would make a dot on a point on the curve, to allow for accurate adjustment...
View 8 Replies View RelatedPhotoshop :: CS6 And Curves Adjustment?
Oct 25, 2013When making adjustments in the curves panel the procedure in previous editions was to raise the curve in the upper section to lighten the image and lower it to darken the image. Mine is working just the opposite. When i raise (or lift) the curve the image darkens and when I lower it lightens. The lower half for contrast works the in the same backwarsds way.
View 2 Replies View RelatedPhotoshop :: Using Eyedropper With Curves
Oct 17, 2013When using Curves to increase contrast for an image, I see that some people will use the eyedropper to define an anchor point on the Curve to manipulate, and others just seem to drag on a spot on the curve without first using the eyedropper.
1. Is there a reason to not use the eyedropper, and instead just drag a point on the curve?
2. Won't using the eyedropper always be more accurate than just eyeballing a spot on the curve to drag?
Photoshop :: Using Toning Curves In CS5
Dec 13, 2012I have a question about using toning curves...
In older versions of Photoshop, I was able to use Paul Butzi's beautiful toning curves (which are ACV files) through the Curves menu.
There was a 'Load' button, and if I pressed that, I could browse my curves folder and pick whatever curve I wanted. Is there any way to do that in Photoshop CS5? I can't seem to find a 'Load' button under Curves, and I'm not sure how to use the Custom Curve feature.
I can't seem to load them under Filters, either. How I could load them?
Photoshop :: Shortcut When Using Curves
Mar 29, 2011When using Curves, one used to be able to move from one point to the next ("point" is what I use to refer to the points that determine the shape of the curve) by holding the Control key and pressing Tab.
This no longer appears to work with Photoshop CS5. I am wondering how I can move from one point to the next without having to click on the next point. More often than not I end up actually moving the point when trying to click on it.
Photoshop :: CS6 Crop And Curves
Apr 4, 2012So, I absolutely love a lot of the changes I've come across so far. I am very happy with the crop tool changes except for one thing. I work on hundreds of B/W headshots at a time where all I do is crop>curves. Up until CS6, when in the crop tool it would still show tone info in the info pallette. Now it shows nothing. This puts a crimp in my workflow because I either have to open the curves dialog or switch to the eyedropper tool to see if I need to apply curves. I have noticed that if I hide the crop area it will revert to showing the info .
Also, with the curves dialog I am going to complain about something that started with CS5. The 'click and drag in image to modify curve' feature is pretty cool but it should respect my option settings. I work with it displaying the amount of pigment but the click and drag feature doesn't respect this setting.
As I said small issues (especially the second one) but it would be nice to get them changed.
Photoshop :: Drawing Curves
Dec 1, 2004how to draw a curve to get this kind of effect?
View 4 Replies View RelatedPhotoshop :: Drawing Curves
Dec 20, 2003how to make curves with a set pixel width. It's hard to explain my dillema with words beyond that... Most of my question is detailed in the picture I've enclosed... (I needed a few visual aids to get my point across, lol)... I'm going to post again in this thread with another picture to help further explain, so check that out if this one doesn't cut it for ya.
View 14 Replies View RelatedPhotoshop :: Duotone Curves
Feb 4, 2008I'm using photoshop 6 and have a problem. When I use dutone curves,I can't reset it. Namely that when I finished tinkering with the curve and save the image, when I start on a new image the old curve is still in place. How can I reset the curve back to its original state?
View 4 Replies View RelatedPhotoshop :: Invert Curves
Jun 5, 2009Is there a way to invert photoshop curves? Like making the opposite curve to neutralize an existing curve that I have.Actually it's simply switching all the input and output values,
View 11 Replies View RelatedPhotoshop :: Curves Adjustment Bug
Nov 16, 2008I have PS 6.0.1. yes I know its an old version but it does everything i require so I have no need for upgrade.
One of the main function i use it for is adjusting curves. recently I have noticed when i open a jpg and select adjustment/curves. Photoshop automatically selects the eyedropper tool and the curves window is NOT displayed. When i attempt to do anything i get the windows error bell/noise. The only way i can carry on is by selecting escape on my keyboard.
This also happens if i attempt to add a curves adjustment layer. The eyedropper tool becomes selected and no curve adjustment window is displayed.
Photoshop :: Bezier Curves
Oct 21, 2008PS CS3
Windows XP
how to use Bezier curves for PhotoShop CS 3.
Photoshop :: Nice Curves
Nov 25, 2004creating nice and smooth curves, curved lines etc.
View 4 Replies View RelatedPhotoshop :: Curves Settings
Jun 2, 2008Using Photoshop CS3 I am unable to change my darkness to lightness orientation as recommended by Dan Margulis (lightness on left, darknss on right). That option was available in CS2. Is it no longer possible in CS3?
View 2 Replies View RelatedPhotoshop :: Smoothing Curves
Jun 1, 2004i`ve created a shape using curves, how can i antialias it and get a smooth curve (and a smooth outline for my mask)?
View 3 Replies View RelatedPhotoshop :: Curves Setting?
Aug 24, 2006my curves dialogue window went from tenths back to quarters (dividers inside window) and i forgot how to get it back. I can't believe I forgot something so elementary.
View 2 Replies View Related