AutoCAD Inventor :: Part That Needs Multiple 9mm Gun Drilled Holes To Different Depths
Nov 4, 2013
I am working with a part that needs multiple 9mm gun drilled holes to different depths. The problem I am having is not being able to create a truly custom single line hole callout. Example( DIA 9mm +.50mm -.00mm TO DEPTH 1.25in)
I understand that this isn't a common hole callout but in my situation it is what is needed. The values need to be linked to the part and not simply overridden as text. I am essentially wanting to make a style that I could apply to any hole note that would give the hole diameter a metric dimension and the depth an inch value.
View 4 Replies
ADVERTISEMENT
Nov 28, 2013
Inventor 2014. I have watched everything I can find and read many entries on related messages.
I create a part by creating rectangle on the XY of 90mm centered on 0,0. I add fillets on 3mm on all four corners. I then add two circles centered on 0,0 of diameters 45 mm and 41mm. What I would like to do is extrude the area between 41 mm and 45 mm circles to 10 mm and the rest of the rectangle outside of the circle 45 mm circle to 6 mm. The center of the part from center to the 41 mm circle is void or open.
I have read two solutions that use a "share sketch" function, that I can't find by right-clicking as indicated in the write-up.
View 4 Replies
View Related
Apr 9, 2013
I am trying to assemble an extruded tube that has holes drilled, to a flat plate to be bolted together. when i go to assemble the parts the drilled holes will not highlight to attach the plate to.
View 9 Replies
View Related
Jun 21, 2010
I'm looking to find how many holes there are in a part ( and then what their diameters are). I tried using
Dim oPartDoc As Document
Set oPartDoc = ThisApplication.ActiveDocument
Dim oCompDef As PartComponentDefinition
Set oCompDef = oPartDoc.ComponentDefinition
MsgBox "there are " & oCompDef.Features.HoleFeatures.Count & " holes"
but this falls down if a hole feature created more than one hole at the same time.
View 9 Replies
View Related
Feb 20, 2013
I have a 3 part assembly . Holes have to be made though the 3 parts . The holes can be made and snet/projected/though all/though distance and this work fine. The holes are shown in each part and the participant command works fine
The holes are shown in a drawing file....all GOOD
BUT
The holes are NOT shown when each part is opened!
View 3 Replies
View Related
Aug 10, 2012
I have a sheet metal part which has several holes in, from which I have created a hole table. The hole table does not list all the holes in my part as I am only permitted to to select holes on one face of the part in the selected view. I have tried selecting all holes on the Isometric view however I cannt do this either.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 5 Replies
View Related
Oct 7, 2011
I am fairly new to Inventor and have recently just finished drawing up a machine made of many parts and sub assemblies and then made into one master assembly. Due to the nature of some hole positions i decided to draw some holes directly on the Master assembly thinking it would then change the original sub assembly/part file. Apparently not as i found out making technical drawings.
How i can rectify this so i dont have to re-draw all the holes on part level and keep my constraints in place?
View 1 Replies
View Related
Nov 16, 2011
Is there a way to edit multiple holes of the same kind.,or do i have to change each one seperately.
eg. Plain Holes To Tapped Holes
Iv 2010
View 6 Replies
View Related
Jan 6, 2012
I'm trying to assemble two parts, each of which has four matching bolt holes.So I do a "mate" between a hole on one and a hole on the other. This works fine, and the parts now behave just like two parts bolted together with one bolt - one can be rotated relative to the other around the bolt hole. So there is one degree of freedom left to be constrained.
But the obvious ways to constrain that one last rotational constraint result in overconstraint. Trying a "mate" between the circles at the ends of the corresponding bolt holes breaks the first constraint, and the non-grounded object "jumps". Trying to auto-mate the two holes results in the holes being constrained as tangent, with the holes not lined up. I've tried constraining the center points of the end circles of the holes. That doesn't work right either.
Doing the second constraint as "tangent-inside" does work. That's a 1 DOF constraint, which makes sense.It took me a while to figure that out. The help files aren't very useful when multiple constraints are involved.
View 9 Replies
View Related
May 3, 2012
I am trying to place a cross dowel into multiple holes. Is there an easy way to automate this? Currently I am placing a cross dowel component and then constraining it to the hole one at a time. Quite a long process to place hundreds of them.
View 2 Replies
View Related
Apr 8, 2013
I need to create a adaptor to go from one 96 hole array pattern to a smaller 96 hole array pattern. The pattern gets smaller in both X and Y. This would go from vertical hole to angled hole back to vertical hole. One or both of the vertical sections could be removable to allow this to be a drilled part. The center section would be a solid block.
Since each hole will be at a different angle (in two different planes) it seems like I would need to create a separate plane for each hole and extrude from that plane. In addition to being error prone, this would take a large amount of time. Is there an easier way?
It would be straightforward to create a block with points for the large 96 hole array on top and the small 96 hole array on the bottom. Is there some kind of point to point method of creating a hole at an angle? A construction line could be drawn point to point but is there a way to make a hole from that?
View 9 Replies
View Related
Jul 13, 2011
Messing around with MAP in Civil3d 2011, creating object data for sanitary sewer manholes, how do you handle object data for inverts since there could be multiple depths and directions. Whats the best way to set it up? And what kind of addtional info should there be. And when I connect to a shp file, how do you label with multiple lines, I seem to only be able to select 1 feature to label. When zoomed out would like to view structure name and when zoomed in view name, rim elevation, invert elevations.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
View 9 Replies
View Related
Apr 18, 2013
Would it be possible to publish a Drilled shank to CC and reuse it in the bolted connection?
View 7 Replies
View Related
Sep 6, 2013
In the attached part, I am trying to show a hole drilled at a compound angle. I have attached a pic of what the part is supposed to look like. I am having trouble laying out the plane on a compound angle. The hole should be centered on the width of the flat and drilled through. 15° angle one way and 20° another way.
The ipt file attached is really messy in attemps to acheive the compound angle.
I am using Autodesk Inventor 2013.
View 4 Replies
View Related
Apr 18, 2013
I'm designing a part that in Autodesk Inventor 2013 that is constructed from several layers laminated together. I have 4 layers:
F (front)
M1 (middle, variation one)
M2 (middle, variation two)
B (back)
The final solid will lhave 17 layers laid out like this:
F | M1 | M2 | M1 | M2 | M1 | M2 ... | B
I currently have a part file containing
F | M1 | M2
What's the best way to create this solid if I want to a) keep all instances of M1 and M2 in sync, and b) make it easy to work on all 4 layers. Do I have to export F, M1, M2, and B as individual parts and import them into an assembly or can I keep them in one part file? I really like the ability to be able to work on all the solids at the same time because they're visually dependant on each other.
View 4 Replies
View Related
Sep 14, 2007
How to put threaded holes in the outer edge of this part. I need the holes to go where the circles are drawn around the radius, with the direction pointing to the center of the radius.
I am using Mechanical 2004.
View 9 Replies
View Related
Jun 25, 2012
I'm creating an assembly and in this assembly I need to add some foam pieces. These pieces are the exact same part number but can vary in length. How can I make such a part so that i can insert it into an assembly multiple times but have different lengths? I'd rather not make multiple pieces of foam for every single assembly for all of our product lines and am looking for the "one foam to rule them all" option. I would assume this would be an ilogic component I would have to create, but i haven't really made a part like that yet.
View 3 Replies
View Related
Dec 12, 2011
Using Inventor 2012, is it possible to use a different K factor value for 2 different bends?
Why would I want to do this? It comes into play based on large and small bend radii in the same part. The large bends require a slightly differnt K factor. I searched the forums and don't think I found what I was looking for. The other thread I found was about bend tables.
View 7 Replies
View Related
Dec 13, 2011
would I be right in saying that an image placed into a drawing can only have one closed polygon clipping boundary?
Imageclp/ clip/ xclip seems to only offer to choose one polygon as boundary and then I can choose whether the image is displayed inside or outside the boundary (invert clip).
Any methods of masking more than one area of the image?
We don't want to use "wipeout" as this caused issues with certain printers printing the wipeout in pitch black.
View 2 Replies
View Related
Apr 4, 2012
attached is a basic IV2012 part made as 1.....can i separate the 2 features and make 2 independant parts from the single part?
If yes can i then use these separate parts and place in assemblies?
View 3 Replies
View Related
Jan 29, 2013
I am currently working on a product where I want to make 2 part lists in my drawing of the same assembly. The first parts list has to view all the parts that are always delivered with our product, and the second one has to show the optional parts and features that could be delivered with the product.
I want both lists to be categorized the same way (comments, material, name), I want the numbers of the list to be chronological (also I don't want the second parts list to start the numbering at 1) and I want both lists to stay connected with their balloons.
Is there any way this can be done, like adding or removing part links to the list manually?
View 1 Replies
View Related
Jan 24, 2013
derive multiple solids from a part. I use the code shown below but it seem as I only can get the first solid in the part that I am trying to derive from.
''More Code'''
' Create a new part document, invisibly.
oPartDoc = m_inventorApp.Documents.Add(DocumentTypeEnum.kPartDocumentObject, , True)
oPartDoc.UnitsOfMeasure.LengthUnits =UnitsTypeEnum.kMillimeterLengthUnits
' Derive the assembly into the part.
Dim oDerivedPrtDef AsDerivedPartDefinition
oDerivedPrtDef = oPartDoc.ComponentDefinition.ReferenceComponents.DerivedPartComponents.CreateDefinition(oTopDoc.FullDocumentName)
Call oPartDoc.ComponentDefinition.ReferenceComponents.DerivedPartComponents.Add(oDerivedPrtDef)
'''More Code'''
How can I get all the solids from the part that I am deriving from?
View 3 Replies
View Related
Feb 28, 2013
Is there a way to sculpt a part composed of multiple solid bodies without having to perform the sculpt command for each solid body? I want to use the same work plane to remove material from a part but the sculpt command only allows me to select one body at a time. This means after the first sculpt of one solid, I need to turn on the visibility of the consumed work plane and perform a sculpt on each of the remaining solids.
Not a huge issue, but in the future I may need to do a large number of these tasks. I attached a sample file. I threw it together in 30 seconds so it's not the prettiest looking thing.
View 4 Replies
View Related
Oct 30, 2013
I have 2 assemblies and drawings of those assemblies. in both the same part is among the parts.
I want to change the name of the part that is in both assemblies with the Design Assistant, but i am afraid that if i will choose one of them and change the part file's name, the other assembly will be damaged. is it true?
I think this might happen because when i open only the part in Design Assistant, it doesn't let me change it's name, so, Design Assistant might not know where this part is inserted in.
View 2 Replies
View Related
May 2, 2013
In testing my latest automation project, I've found that I can't save copies of a part multiple times (after deleteing the files off the disk) unless I close out of the top level assembly document, and reopen it. I used Process Monitor and determined that Inventor is trying to save to an existing file instead of creating a new file.
Inventor 2013 SP 1.1
View 1 Replies
View Related
Jul 23, 2013
I would like to change the way a linetype appears for a specific part, globally throughout my drawing package. How is this done?
I am currently selecting the part in the model tree in the browser and changing it that way, but I have to do it on multiple views, for multiple pages .
View 2 Replies
View Related
Feb 15, 2013
My issue is we have Universal assemblies that never change. These assemblies are thousands of parts. (hardware gaskets other random assemblies.) this top level universal assembly never changes.
to increase time in layouts. we would like to create these universal assemblies into 1 sold part.
Is there a was to export an assembly into a single solid part.
View 1 Replies
View Related
Jul 23, 2013
Is there a way to split this part into multiple parts? I would like to split the part on the corners, leaving a small gap for welding.
View 7 Replies
View Related
Nov 8, 2013
I've got a machine designed that has a couple hundred parts - originally built as one main assembly (with a number of weldment subassmblies). The problem is that the BOM is too large to feasibly have on the drawing and still show assembly detail. I'm trying to avoid a multi-sheet configuration.
So I've grouped certain items and demoted into subassemblies. The problem is that all the subassemblies are attached to a main frame- and I'd like to show this frame in each of the subassemblies as a reference. Is there a way to add a "phantom" copy of the framework to each of the subassemblies to that it can be seen? (and the assembler can see how the subassembly is mounted on the frame) Otherwise all these parts are just floating in space on the subassembly (and constraints are lost on the subs).
I'd like to keep the frame on the top assembly, as it may be customized for future machines, while using the same subassemblies.
2014 Product Design Suite
W7Pro-64
Intel Xeon E5-1620 @ 3.60 GHz 16GB RAM
Dual 1GB NVIDIA Quadro K600 graphics
View 9 Replies
View Related
May 7, 2012
In AutoCad in a drawing with multiple parts I use lines / rectangles to separate each part.
So the drawing gets clear.
How can this be done in Inventor?
With the lines connected to the border?
View 1 Replies
View Related
Jun 14, 2013
Assembly comprised of multiple components all derived from the same master sketch "4 Inch Rail Master Sketch"
Using the sketch to drive geometry, using the parameters to drive various extrude lengths.
Geometry changes seem to propogate quite well, while parameter changes do not...is this a bug or am I doing something wrong? Generally have to open each individual part and "edit derived part" to force changes to propgate...
files attached (move end of part marker down for all .ipts).
View 9 Replies
View Related
