AutoCAD 2013 :: Scene Cannot Be Rendered After Setting Facetres
Dec 12, 2012
I created a model, assigned materials, and it renders fine if I leave the facetres at the default of .5. My model has curves though, so I need to increase the facetres to at least 3 or 4. If I set facetres to anything, even 1, the next time I render, I get the message that the scene cannot be rendered because it does not contain any faces. My machine is a Xeon, 12gb ram, with quadro fx580, autocad 2013 x64. But this happened to me on earlier versions, and on my previous workstation as well.
Is there some bug with the facetres variable?
View 1 Replies
ADVERTISEMENT
Sep 4, 2012
Best practices for setting up systems in a lab environment. We have a lab enviroment of about 200 systems that access AutoCad, Inventor, Mechanical and others.
We need to have a customized interface come up when Autocad is opened by students.I have read that you can do this with profiles and workspaces and also with loading a acad.lsp file.
In the past we have just copied the Windows admin profile used to customize AutoCad to the default profile. In AutoCad 2013 that does not seem to grab everything. It doesn't seem to be the best way to do what we need.
We will also be moving to Windows 7 soon which will also cause an issue.I want to find the best way to do this with out having to deal with the Windows profile.
View 1 Replies
View Related
Jan 8, 2014
I would like to compute a scale of scene based on data from dxf. I think, should use some data from VPORT like view height and lens length.
View 1 Replies
View Related
Jun 13, 2012
I have a large scan project (Scene 5.0's new file structure) that contains a few registered workspaces (*.fws) and I would like to import at least one into AutoCAD 2013. I followed the workflow of going to Insert>Point Cloud>Create Point Cloud, and I selected the *.fws that I wanted to import (or rather have indexed into a *.PCG).
As soon as I hit 'Create' I get an error that says 'FAILURE! Fail to open scan file" and nothing happens. I can import *.fls, but they are not registered.
Does FARO not support AutoCAD 2013?
View 5 Replies
View Related
Nov 21, 2013
I recently added 2 monitors to my set up to bring my total to 3. I am trying to figure out the best way to work on one drawing, with 2 differant veiws on each of the 2 main screens.
I would like my main screen to have the plan view and the second monitor to have an isometric veiw (or whatever I need at the time) of the same drawing. Is there a way to have the same drawing opened up in another window, in one session of Autocad 2013. One on the main screen and one on the secondary.
View 1 Replies
View Related
Sep 27, 2012
I made an image, but we had no idea what pc was going to be the NLM server so I didn't fill in the serverfield. Then I deployed the image to 10 pc's. I got my .lic file, set up a server. It loaded the .lic file, saw I have 10 seats so YAY.
So, when I start AutoCAD 2013 for the first time there is no "Where is your server?". Only registering or activation code.
I verified my image and it was alright (Network license checked > empty serverfield) Will I have to reinstall the images or am I missing something why he's not asking for a server?
View 2 Replies
View Related
Dec 10, 2013
I have 2 staff members who both have recently had problems with their custom settings from OPTIONS revert to the default settings every time they close out of AutoCad. One is using AutoCAD 2013 on W7 & the other is using AutoCAD 2014 on W8.1.
They have to reset their display, units, osnaps, etc regularly. I suggested creating a profile they can use until we resolve the problem,
View 1 Replies
View Related
May 29, 2012
We just switched to AutoCAD 2013 and we are trying to figure out the best way to make a note with a leader. So far it seems the best thing to use is the keynote option called TEXT WITH STRAIGHT LEADER. If we just do text, no leader is automatically added. This seems to work except we cannot set the text to a default of arial.
Once the text is entered, it changes to ArchDim instead of the text we created called 'Arial'.
I'm the REVIT person in the office so I'm trying to figure out CAD as I go...hence I need easy instructions that I can try to navigate...
View 1 Replies
View Related
Jul 21, 2012
I have just installed my autocad 2013 software. I've set the units to millimeters. But the workspace is still in inches. Even the dimentions are coming in inches. How to set the unit in millimeters?
View 1 Replies
View Related
May 16, 2013
I have installed AutoCAD 2013 and Inventor and here is my problem. This versions of AutoCAD crashes a lot, usually related to making pdf's, but that, while problematic in itself, is a secondary issue and not the reason for my email. When it crashes, it rests all my custom work place settings, even after I have saved and locked them. Restarting AutoCAD takes a few minutes, but this is VERY annoying and time consuming to reset everything everytime this crashes. I have never encountered this problem with previous versions of CAD.
View 2 Replies
View Related
Nov 11, 2013
The default file location for the template .dwt file in my AutoCAD options keeps resetting to None (see attaached, red arrow). It should be the same location as the line below it (see attached, green arrow). I have reset it a few times now, but it keeps reverting back to None. Do you know why this is happening and/or how I can fix it so the setting will stay?
View 2 Replies
View Related
Oct 17, 2013
I have custom pull down menus that I use for hatching. The reason I use this method instead of the tool pallet or the regular hatch toolbar is that I have quick access to multiple commonly used hatch patterns already set up with scales and directions and can pick multiple objects at once.
The only problem is I loose the associativity when stretching an object. It's Associative if I use the hatch command or the tool pallet. I had no problem with this method when using AutoCAD 2010. Is there some system variable setting that has changed?
View 5 Replies
View Related
Sep 23, 2013
What is the ideal dimension style setting for metric say 1:100 scale. See my setting on the attachment.
View 8 Replies
View Related
May 23, 2012
Is there a way in AutoCAD 2013 to have it automatically change to a certain layer when you do common tasks. I am wondering if there is a system variable, or a routine that I could automatically load when I start AutoCAD to do this. It would also be nice that the layer would then go back to the original layer that was being used prior to the command. What are my options for doing this.
For instance when I load an xref I would like it to go on the layer; A-XREF. When I insert a block I would like it to go on the layer; 0, when I create a new dimension I would like it to go on the A-DIMS layer, when I create a hatch it would set to the layer A-WALL-PATT, when I add a leader with text it would go to A-ANNO-NOTE, etc..
View 1 Replies
View Related
Sep 17, 2012
I'm drawing something much larger than the paper so I would like to chose paper size A(8.5x11) set the scale then print it out on A(8.5x11) paper. For example: my desk is approximately 65inch x 30inch and I want to draw and print it on A(8.5x11) paper. I want it to print with the drawing being accurate to scale...how do I do this?
View 9 Replies
View Related
Mar 27, 2013
I have AutoCAD 2013 hitting the following registry location several hundred thousand times before closing a file:
HKLMSOFTWAREAutodeskAutoCADR19.0ACAD-B001:409LocaleID
Looking at a Procmon trace, there is a set of 3 entries: RegOpenKey,RegQueryValue,RegQueryValue and each is successful.
View 3 Replies
View Related
Jun 28, 2012
So I have my properties pallete and layer pallete docked on the left side of screen. They dont stay open long enough so I was wondering if there is a time setting to stay open then automatically dock themselves back?
View 2 Replies
View Related
Sep 19, 2013
I cannot for the life of me figure out how to do the following:
set my units to inches so I can enter dimensions in inches and see them displayed in inches.
View 9 Replies
View Related
Sep 24, 2013
Setting that will turn on snap all of the time instead of just when a command is active. You can't even tell that snap is on unless certain commands are active. The cursors doesn't snap on the BREAK command thus I can't use a two point break with any accuracy because the cursor doesn't snap until after the object is selected.
I need snap ALL THE TIME not just when certain commands are active.
View 5 Replies
View Related
Sep 27, 2013
sent drawing out to vendor, received back drawing where they had changed the width factor to .75. is there a way to globally edit all these mtext entities?
View 2 Replies
View Related
Aug 24, 2012
I am wanted to change some setting for editing blocks in 2013. I want to edit the block in place by just double clicking onto it. I can go through the properties and click on "edit in place" but I would like to eliminate that step.
View 9 Replies
View Related
May 3, 2013
is there a setting to have this option always checked?
View 1 Replies
View Related
Jun 24, 2013
I am looking for the location of the setting that controls the background of paperspace. Not the printable area, but the background. See image below.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
View 6 Replies
View Related
Jan 15, 2013
I guess it does NOT support it because it seems that it does NOT work properly. For example, in case of multiple lines of “Horizontal” setting, it works properly like followings. But in case of multiple lines of “Vertical” setting, it does NOT work properly like followings.
Configure of “Horizontal”:
ABC
DEF
GHI
Configure of “Vertical”:
ABC DEF GHI
In my perspective, it should go downward like followings.
In my “perspective” of Vertical”:
A
B
C
D
E
F
G
H
I
We are making application software for importing DXF file from AutoCAD. If AutoCAD does not support multiple lines of vertical setting on mtex, our software also should not support it, I think. I want to know the specification for multiple lines of vertical setting of AutoCAD.
View 3 Replies
View Related
Jun 13, 2013
Is there a way to change the default setting for the Array path command?
When I use the arraypath command I:
1st - Select Object
2nd - Select path curve
3rd - Type in "I" for Item to change to my desire spacing.
View 9 Replies
View Related
Apr 23, 2012
AutoCAD 2013 crashes during the plot configuration for our printer. When I select Custom Properties for our Kip 5000 Series Printer I get an Unhandled Exception popup. When I click continue I get a message that "AutoCAD Applicaiton has encountered a problem and needs to close", the program crashes. AutoCAD 2013 will not let us select the kip 5000.pc3 file we used for Autocad 2012.
How can I set my printer up if it keeps crashing the program. Is there a new driver for 2013, if so where do I find it. Is it from AutoCad or the printer company Kip America (who have yet to reply to my email).
I have attached the error message
View 4 Replies
View Related
Mar 22, 2011
I have two viewports in a layout showing 3d objects where I would like to see rendered quality when I print my dwg. How do I get this to work right? As of now the print output is not that great of quality. Shade plot is set to 'rendered' and presentation quality for both viewports.
View 5 Replies
View Related
Mar 29, 2013
When walking through my model a brick wall looks like the left image below. When I produce a rendered image the wall appears much brighter as you can see. Cause I've never fumbled around with lighting settings. The darker version is pretty much the one I'm after.
Capture.GIFCapture2.GIF
View 1 Replies
View Related
Jun 30, 2010
No matter what I change the viewport or model space background color to my rendered image comes up with a black background. How do I change it to white so I'm not using all the toner on the printer?
View 8 Replies
View Related
Sep 30, 2013
Using Inventor 2014 for some very simple (just a few component) models. When I use Studio to render an image, two objects are shown with a "cross" on them. The parts are nothing but extruded circles--nothing to them, so it's not clear to me why there are lines on their surface.
View 5 Replies
View Related
May 18, 2011
CABINET FINAL.dwg
How do i plot a rendered object ? am using autocad 2010
attached is the object
View 5 Replies
View Related
