AutoCAD 2013 :: Right Click On Hatch -> Generate Boundary?
Jan 7, 2014When you right click on a hatch pattern...
Is there a way to Generate only the perimiter boundary, without the 'islands'?
ADVERTISEMENT
AutoCAD 2013 :: More Than 10000 Hatch Boundary Objects Are Selected
Apr 9, 2013“More than 10000 hatch boundary objects are selected”,
In the attached screenshot, I wanted to make hatch for the indicated boundary but I got the message shown in the second screenshot (“More than 10000 hatch boundary objects are selected”)
The dwg file is stored in the link below:
[URL]
What is wrong with having any number of hatch boundary objects?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCad :: Change Hatch From ANSI31 To GRAVEL Some Of Hatch Shows Outside Boundary
Aug 24, 2011I have a hatch (ANSI31) enclosed by a closed polyline. Whenever I change the hatch from ANSI31 to GRAVEL some of the hatch shows up outside the boundary. The Polyline consists of both arcs and line segments, and the hatching errors are occurring within the radius of the arc segments. Changing it from Associative to Non Associative makes no change.
I am using AutoCAD 2011.
AutoCAD 2010 :: Open Hatch Edit Dialog With Double Click On Existing Hatch?
Apr 17, 2010It is no more possible open Hatch Edit dialog with double click on existing hatch. Now, this way opens only Properties
View 9 Replies View RelatedAutoCad 2D :: Getting Error While Hatch Boundary
Oct 14, 2011why I get an error trying to hatch this. Its a closed Polyline.
Hatch issue.dwg
Edit: Or rather its 4 joined polylines.
AutoCad :: Invalid Hatch Boundary
Mar 16, 2012I have a problem in that a customer drawing, actually several cutomer drawings are not closed polylines. tHEY ARE REASONABLY SIMPLE PROFILES THAT i NEED TO CUT OUT ON A CNC ROUTER. mY PROBLEM BEING THAT AS THEY ARE NOT CLOSED the router software will not recognise them properly. Is there anyway to find out where exactly on the profile the gap is with zooming right in and panning around?
View 7 Replies View RelatedAutoCad :: Unable To Hatch Boundary?
Nov 30, 2011every time I try to hatch it come up with ‘Unable to hatch the boundary’ and it does this with all hatches except the SOLID hatch, why this is!
View 5 Replies View RelatedAutoCad 2D :: How To Hide Hatch Boundary
Aug 29, 2013I wish to hide my associative hatch boundaries. Is this possible to do as a permanent rule?
I have seen that you can apparently put them on a different layer then turn them off.
I used the select similar command but it chose all polylines (which i guess is what a hatch boundary is?)
AutoCAD Civil 3D :: Hatch Extending Beyond Boundary?
Dec 13, 2012I've attached a screenshot of the issue I'm dealing with. I have a closed polyline and when I first hatch the area it appears to be correct, but then I'll go do another command and then the hatch seems to extend beyond the boundaries of the polyline.
View 3 Replies View RelatedAutoCAD 2010 :: How To Show Hatch Boundary
Apr 27, 2011In 2010 I would select hatch, and then just drag grips around to where I needed them. Now in 2011, I select hatch and don't get the grips. How do I turn those grips back on?
View 7 Replies View RelatedAutoCad 2D :: How To Hatch Edge Boundary Of Texts
Feb 10, 2012How to hatch the edge boundary of the texts ?
View 6 Replies View RelatedAutoCad :: Hatch Inner Boundary Of Closed Polyline?
Jul 6, 2012I am trying to find a command that will hatch the inner edge of a complex closed poly line, rather than hatch the entire area inside the poly line.
When I have simple shapes such as a rectangle I create a smaller rectangle inside the first that is 1' (or whatever I want my hatched area to be) smaller on all sides than the first rectangle. I hatch by selecting the two rectangles; I change the "Associative" hatch property to "No" and then delete the inner rectangle.
My problem now is that I have a complex closed poly line that I would like to hatch the inner perimeter with a set thickness, say 1 foot. Is there an easy way to hatch a inner boundary of a closed poly line or to recreate a scaled down copy of the poly line that is a set distance smaller all around. I hope I have conveyed the question clearly enough.
AutoCad 2D :: Hatch Boundary Detection Process
Apr 12, 2012Annoying time spend waiting while acad automatically detects hatch boundary? - usually a boundary of some sort, thats completely useless anyway.
I'm seeking full control and want to select the boundaries myself and hope some of you can tell how to switch off or avoid this automatic process of boundary detection that usually follows "h" ↵ ( "hatch" ↵ or "bhatch" ↵ ).
AutoCad :: Valid Hatch Boundary Not Found
Jun 6, 2011i am trying to put a hatch down and am gettin this error 'Valid hatch boundary not found'. now am quite sure the area is enclosed so as far as i can see their should be an issue. the areas autocad is referring me to are are link together and have been replaced but i still get the same issue, when i max out the zoom their is only a tiny dot
View 6 Replies View RelatedAutoCAD LT :: Hatch Spacing Too Dense Or Boundary Not Closed
Apr 25, 2013I have a line drawing from a draftsman. It was imported from some other program, but I'm not sure which. However, this has cropped up many times over the years on my drawings as well as others. It just is typically quickly remedied with a workaround.
The hatch spacing too dense issue requiring me to break up the area: this problem will occur on equally sized areas at the same zoom factor at which I just hatched an adjacent area. I have changed the "MaxHatch" variable environment from stock at 10k, to 100k, then to 1,000k; yet the problem persists. I don't have a particularly fast machine so by that point I decided there was no need to max the variable at 10,000k. There are no z variables in the drawing though it appears, almost randomly, to have plines or lines along the same length of wall.
The second issue is the closed boundary. This occurs on lines that are connected at all corners, even when I stretch and reconnect a line, though that is a very time consuming method. When I increase the hgaptol variable it will hatch bizzarre areas that have no relation to what I am attempting to hatch. This is also occuring even inside a REC that I created just prior to hatching due to error on the original layout. I have to hatch an object rather than select an internal point. It has become so obnoxious in this drawing that I decided to post with these questions.
AutoCAD 2010 :: Generate Hatch Files
Oct 5, 2011It's routine generate hatch files. (pat extension). You can use them in Autocad or import in Revit.
Two commands:
DHA - tile paterns.
DHL - construction paterns.
I Hope it's work.
AutoCAD 2010 :: Hatch Area And Delete Polylines Then Reconstruct Boundary
Aug 25, 2009I have several days of experience with Autocad 2010... The problem: I have many (a lot) polylines in my 2D drawing that are adjacent to each other, but not joined. What is a good way of joining them, so that those that "touch" each other become one? Maybe I can hatch the area, then delete polylines and then reconstruct the boundary?
View 9 Replies View RelatedAutoCAD .NET :: Double Click On Stretch Grip Of Dynamic Block Generate Fatal Error
Aug 7, 2011I have this double click class. which works fine. In order to clear grips after user finishes with double clicking,I added two lines (which shown on code below). But having those two line make code faulty. When ?
if user select a dynamic block with stretch grip on it, then double click on stretch grip trianlge. code geneaarte fatal error. Funny thing is code doesn't catch. it. Is there any other way to clear grips after double click ?
Here is code:
Imports Autodesk.AutoCAD.RuntimeImports Autodesk.AutoCAD.ApplicationServicesImports Autodesk.AutoCAD.EditorInputImports Autodesk.AutoCAD.DatabaseServicesPublic Class Main_0_Class Implements IExtensionApplication Public Sub Initialize() Implements IExtensionApplication.Initialize dblClickEven_Class.Start() End Sub
[Code] .....
AutoCAD 2013 :: Missing Hatch Patterns In Hatch Library?
Jan 2, 2013Just downloaded Autocad 2013 and am missing quite a few of the standard hatches (siding, soldier, board and batten, etc.) What should I do to get them back. When I open old drawings with these hatches in them, they load just fine...but I am unable to hatch any new areas with these hatches (because they are not listed in the hatch library)
View 9 Replies View RelatedAutoCAD LT :: 2013 Single Click On Ribbon Is Now A Double Click
Apr 17, 2012I have noticed that when I click on any button on the Ribbon Panels it now requires more that one click to activate the button.
View 9 Replies View RelatedAutoCAD 2010 :: Hatch Editor Not Function When Double Click
Mar 27, 2012I can't edit my hatch pattern when i double click it. I only able to edit the hatch patter once after i click the "hatch editor" menu button.
View 6 Replies View RelatedAutoCAD 2013 :: Clipping Boundary Selectable
May 3, 2012In ACAD 2013 When selecting a block that is xclipped the xclip boundary is visible as a dashed, editable line. The editable dashed line is also selectable even though it is not visible when the block is not selected.
Is there a way to turn off the selectablity of the xclip boundary, so that I am not selecting blocks when I click near the xclip boundary limits even when I have my XCLIPFRAME set to 0 and the boundary is not visible?
AutoCAD 2013 :: Offset Boundary Around A Polyline
Dec 19, 2012What is the command to offset a polyline in all dimension as shown in the attached?
Infrastructure Design Suite Premium 2014
Self-built i7-3930K, 16Gb RAM, P9X79 m/board
SSD(system), HDD(data), Win7Pro64, Quadro K4000
AutoCAD 2013 :: Recreate Boundary Grayed Out
Sep 7, 2012I am unable to click on the "recreate boundary" button within the Hatch and Gradient box. It is grayed out. I can type "generateboundaryhatch" and that will work, but I like being able to click on the button while I am in the dialogue box rather than typing in the command.
View 2 Replies View RelatedAutoCAD 2013 :: Edit View Port Boundary
Jul 11, 2012How to edit the boundary of a view port Insert a segment or delete one. If I remember this was available in PEDIT but now I can not able to do it.
View 1 Replies View RelatedAutoCAD 2013 :: Give No Color For Boundary Of Layout?
Feb 17, 2013How to give “no color” for the boundary of the layout?
I wanted to give the boundary of the lay out “no color” or “white” such that it disappears as the drawing is printed out but couldn’t figure out how to achieve it.
Also, I’m not sure if there are some other styles for the boundary of the lay out
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD 2013 :: Any Way To Generate Solid From Regions
Feb 28, 2013I decided to try at making myself a 3d D20 in AutoCAD 2013 and have run into MANY problems. I have slowly chipped away at them, but I still have one issue, I am having issues turning my 20 regions (faces) into one solid.
Picture below showing the 'shell' made out of regions on the right.
AutoCAD 2013 :: How To Generate Simple DWG Automatically
Aug 30, 2012We are implementing a new ERP system and we've programmed the configurator in it to build a price for us. We'd like to create a simple 2D drawing for us in AutoCAD based on some of the data from the configurator automatically. Is it possible using AutoCAD LT 2013 or do you need the full version to build something like this? Also, does this sound like it would require a lot of programming in CAD?
View 8 Replies View RelatedAutoCAD 2013 :: Generate Thumbs From Old DWGs
Mar 2, 2013Any archiving or library tool that would develop a preview contact sheet - JPG, PDF, etc.. of a folder of say 700-1000 basic DWG drawings of manufacturing assemblies (not complex building layouts or anything).
We've got a ton of old drawings that we need to sift through and I don't want to open each one.
I'm thinking there's some 3rd party something.
AutoCAD Civil 3D :: Query Point Cloud Boundary Then Add All Points Within Boundary
Nov 9, 2012i need to know if there is any way to control the points in the point cloud.
1. either only import the point cloud in a polyline area i specify
2. add all the points within a boundary not limited to the pointclouddensity = 100, freaking default is 15 almost cost my job today. extremely stressed out right now.
i am talking about extreme lidar surveys. 1km 1km LAS/0.5m contours/xyz files times 355 of them. covers a 2km wide corridor. but i only need 100m wide after i define the road alignment. no need to have all the extra points.
right now i densify the heck out of it and end up like 5-12m points. decent but not good enough because the geotech is bitching about that accuracy is not good for some feasibility study. or is there any software i can do this besides civil 3d.
what i want can also do is automate the 'add points to surface" under point cloud and have the software do multiple boundaries without having me baby it over the night. right now every click is 5 minutes and adds like 400k to 1 million points. Civil 3D 2012
AutoCAD 2013 :: 2013 To 2014 Hatch Pattern File Migration?
Jul 1, 2013I have been migrating dozens and dozens of .pat files from one version of AutoCAD to the next for many, many versions. Most recently in AutoCAD 2013 the .pat files were stored in the C:Program FilesAutodeskAutoCAD 2013SupportPatterns - worked fine. During the migration to 2014 I received an install error report stating that this subdirectory did not exist and could not be created. Alternately it stated that the new default path C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupport will be used instead.
At first I created the Patterns subdirectory where it could not be done automatically. No luck. Then I placed the Patterns subdirectory in C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupportPatterns and no luck.