AutoCad :: Unable To Hatch Boundary?
Nov 30, 2011every time I try to hatch it come up with ‘Unable to hatch the boundary’ and it does this with all hatches except the SOLID hatch, why this is!
View 5 Repliesevery time I try to hatch it come up with ‘Unable to hatch the boundary’ and it does this with all hatches except the SOLID hatch, why this is!
View 5 RepliesI have a hatch (ANSI31) enclosed by a closed polyline. Whenever I change the hatch from ANSI31 to GRAVEL some of the hatch shows up outside the boundary. The Polyline consists of both arcs and line segments, and the hatching errors are occurring within the radius of the arc segments. Changing it from Associative to Non Associative makes no change.
I am using AutoCAD 2011.
why I get an error trying to hatch this. Its a closed Polyline.
Hatch issue.dwg
Edit: Or rather its 4 joined polylines.
I have a problem in that a customer drawing, actually several cutomer drawings are not closed polylines. tHEY ARE REASONABLY SIMPLE PROFILES THAT i NEED TO CUT OUT ON A CNC ROUTER. mY PROBLEM BEING THAT AS THEY ARE NOT CLOSED the router software will not recognise them properly. Is there anyway to find out where exactly on the profile the gap is with zooming right in and panning around?
View 7 Replies View RelatedI wish to hide my associative hatch boundaries. Is this possible to do as a permanent rule?
I have seen that you can apparently put them on a different layer then turn them off.
I used the select similar command but it chose all polylines (which i guess is what a hatch boundary is?)
I've attached a screenshot of the issue I'm dealing with. I have a closed polyline and when I first hatch the area it appears to be correct, but then I'll go do another command and then the hatch seems to extend beyond the boundaries of the polyline.
View 3 Replies View RelatedIn 2010 I would select hatch, and then just drag grips around to where I needed them. Now in 2011, I select hatch and don't get the grips. How do I turn those grips back on?
View 7 Replies View RelatedHow to hatch the edge boundary of the texts ?
View 6 Replies View RelatedI am trying to find a command that will hatch the inner edge of a complex closed poly line, rather than hatch the entire area inside the poly line.
When I have simple shapes such as a rectangle I create a smaller rectangle inside the first that is 1' (or whatever I want my hatched area to be) smaller on all sides than the first rectangle. I hatch by selecting the two rectangles; I change the "Associative" hatch property to "No" and then delete the inner rectangle.
My problem now is that I have a complex closed poly line that I would like to hatch the inner perimeter with a set thickness, say 1 foot. Is there an easy way to hatch a inner boundary of a closed poly line or to recreate a scaled down copy of the poly line that is a set distance smaller all around. I hope I have conveyed the question clearly enough.
Annoying time spend waiting while acad automatically detects hatch boundary? - usually a boundary of some sort, thats completely useless anyway.
I'm seeking full control and want to select the boundaries myself and hope some of you can tell how to switch off or avoid this automatic process of boundary detection that usually follows "h" ↵ ( "hatch" ↵ or "bhatch" ↵ ).
i am trying to put a hatch down and am gettin this error 'Valid hatch boundary not found'. now am quite sure the area is enclosed so as far as i can see their should be an issue. the areas autocad is referring me to are are link together and have been replaced but i still get the same issue, when i max out the zoom their is only a tiny dot
View 6 Replies View RelatedWhen you right click on a hatch pattern...
Is there a way to Generate only the perimiter boundary, without the 'islands'?
I have a line drawing from a draftsman. It was imported from some other program, but I'm not sure which. However, this has cropped up many times over the years on my drawings as well as others. It just is typically quickly remedied with a workaround.
The hatch spacing too dense issue requiring me to break up the area: this problem will occur on equally sized areas at the same zoom factor at which I just hatched an adjacent area. I have changed the "MaxHatch" variable environment from stock at 10k, to 100k, then to 1,000k; yet the problem persists. I don't have a particularly fast machine so by that point I decided there was no need to max the variable at 10,000k. There are no z variables in the drawing though it appears, almost randomly, to have plines or lines along the same length of wall.
The second issue is the closed boundary. This occurs on lines that are connected at all corners, even when I stretch and reconnect a line, though that is a very time consuming method. When I increase the hgaptol variable it will hatch bizzarre areas that have no relation to what I am attempting to hatch. This is also occuring even inside a REC that I created just prior to hatching due to error on the original layout. I have to hatch an object rather than select an internal point. It has become so obnoxious in this drawing that I decided to post with these questions.
“More than 10000 hatch boundary objects are selected”,
In the attached screenshot, I wanted to make hatch for the indicated boundary but I got the message shown in the second screenshot (“More than 10000 hatch boundary objects are selected”)
The dwg file is stored in the link below:
[URL]
What is wrong with having any number of hatch boundary objects?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I have several days of experience with Autocad 2010... The problem: I have many (a lot) polylines in my 2D drawing that are adjacent to each other, but not joined. What is a good way of joining them, so that those that "touch" each other become one? Maybe I can hatch the area, then delete polylines and then reconstruct the boundary?
View 9 Replies View RelatedWhen I try to fill a figure using gradient i get: "Unable to fill the boundary with solid." But when I try to fill the figure using hatch I get it to work. The problem is I want to use gradient.
View 1 Replies View Relatedi need to know if there is any way to control the points in the point cloud.
1. either only import the point cloud in a polyline area i specify
2. add all the points within a boundary not limited to the pointclouddensity = 100, freaking default is 15 almost cost my job today. extremely stressed out right now.
i am talking about extreme lidar surveys. 1km 1km LAS/0.5m contours/xyz files times 355 of them. covers a 2km wide corridor. but i only need 100m wide after i define the road alignment. no need to have all the extra points.
right now i densify the heck out of it and end up like 5-12m points. decent but not good enough because the geotech is bitching about that accuracy is not good for some feasibility study. or is there any software i can do this besides civil 3d.
what i want can also do is automate the 'add points to surface" under point cloud and have the software do multiple boundaries without having me baby it over the night. right now every click is 5 minutes and adds like 400k to 1 million points. Civil 3D 2012
How to hatch this pool deck with sun chairs (blocks)? I have included an attachment ...
View 8 Replies View RelatedI've got some troubles to add some hatchs in a 3D solid, or a 3d face etc, in autocad windows, without .net addon.
I can add a hatch, but the hatch is on a plane at the bottom of the solid, but not around the solid.
Is there any ways to do this programmatically?
im unable to hatch a simple rectangle i found in one of my drawings. uploaded is a problematic portion. i filleted edges but to no avail
[URL]........
I need to be able to snap som lines etc to some hatches. I have set Options - Drafting and unchecked "Ignore hatch objects" and OSNAPHACTH: 1 and it still doesnt snap.
View 9 Replies View RelatedThis is a problem I've had on 7 pc's:
All of the pc's are I7's 8gig Windows 7
The problem is, while making a sketch and trying to hatch it, it's locks up the system. Completely using up all of the resources to the point I have to unplug the pc/hot boot it.
This has been happening on both Inventor 2012 and 2011. (doesn't matter which version of Inventor .. Suite/Prof, Ultimate etc)
I'm thinking it has to be a Windows update that is messing it up, as it worked in the past.
Work ~ Inventor Ultimate 2013 SP1.1
Win 7 64bit ~ i7 20gb
Nvidia Quadro FX 1700
Home ~ Inventor Ultimate 2013 SP1.1
Win 7 64bit i7 - 16gb
Nividia GeForce 9800 GT 1GB
240g Kingston HyperX SSD
Unable to find the application data or support files within Windows 7 to insert a hatch .pat file for Autocad 2011 -
View 1 Replies View RelatedI am wanting to either render of hatch some linework. I'm wanting to make the ring red around the outside and grey on the inside ideally.
When I try this though,it keeps prompting me that the object isn't one the same plane, or something along those lines.
I've attached the drawing file I am talking about, and its 2013 format.
I successfully created multiple hatch regions in a sketch on a section view in a drawing. I want to change or delete one of the hatch regions, but am unsuccessful. I clicked on Fill/Hatch Region and then selected the region that already has a hatch defined, but the dialog box does not show that these is a hatch defined.
If I click the hatch button it creates another hatch over the top of the current one and does not allow the current one to be deleted or changed. Of the four regions in my sketch, one works and the other three do not.
I could not move or copy the hatch,it seems like locked. The dxf drawing was exported from CSC OrionR18.
View 5 Replies View RelatedI've been using Autocad 2007 for the past 5 months without these issues, then I had to create a new account on my computer at work and now EVERY time I create a hatch it turns into this dead mass. Yes, I've tried creating an associative hatch, and no, I can't edit them either.
View 9 Replies View RelatedI am unable to fill objects with any sort of hatch in my current drawing. Other drawings are fine, but in this one, nothing will hatch, either form the tool palettes option or from the hatch menu.
View 7 Replies View RelatedI used a 2d polyline to create a surface boundary for a surface created. The polyline is a closed loop. For the boundary type it is outer, unchecked Non-destructive breakline, and mid-ordinate distance = 1.
My problem is that when I do this I only get a small portion of the surface to show up within my surface boundary. If I don't have a surface boundary the entire drawing surface shows up no problem.
The purple polyline is my boundary and the light blue is the surface created within the boundary.
I have curved underbelly of a massive stair. In order to draw the the detail, I would like to pick this curved line of the underbelly to make a hatch but unable to. Is there a way around this or is this just something I have to work around?
View 1 Replies View RelatedI am trying to entmake a hatch entity from a hatch template.
After entget the template hatch entity, i get the followings
Select object: ((-1 . <Entity name: 7ed11b78>) (0 . "HATCH") (330 . <Entity
name: 7efc7c10>) (5 . "737") (100 . "AcDbEntity") (67 . 0) (410 . "Model") (8 .
"SECTION-LABEL") (62 . 255) (100 . "AcDbHatch") (10 0.0 0.0 0.0) (210 0.0 0.0
1.0) (2 . "SOLID") (70 . 1) (71 . 0) (91 . 1) (92 . 1) (93 . 8) (72 . 1) (10
633596.0 5.79713e+006 0.0) (11 633519.0 5.79713e+006 0.0) (72 . 1) (10 633519.0
5.79713e+006 0.0) (11 633519.0 5.79708e+006 0.0) (72 . 1) (10 633519.0
5.79708e+006 0.0) (11 633500.0 5.79708e+006 0.0) (72 . 1) (10 633500.0
[code]....
Now I wrote the following code using the above data as follows
(entmake (list (cons 0 "HATCH") (cons 67 0) (cons 410 "Model") (cons 8 "SECTION-LABEL") (cons 62 255) (cons 10 (list 0.0 0.0 0.0)) (cons 210 (list 0.0 0.0 1.0)) (cons 2 "SOLID") (cons 70 1) (cons 71 0) (cons 91 1) (cons 92 1) (cons 93 8) (cons 72 1) (cons 10 pt1) (cons 11 pt2) (cons 72 1) (cons 10 pt2) (cons 11 pt3) (cons 72 1) (cons 10 pt3) (cons 11 pt4) (cons 72 1) (cons 10 pt4) (cons 11 pt5) (cons 72 1) (cons 10 pt5) (cons 11 pt6) (cons 72 1) (cons 10 pt6) (cons 11 pt7) (cons 72 1) (cons 10 pt7) (cons 11 pt8) (cons 72 1) (cons 10 pt8) (cons 11 pt1) (cons 97 0) (cons 75 0) (cons 76 1) (cons 98 1) (cons 10 (list 0.0 0.0 0.0)) (cons 450 0) (cons 451 0) (cons 460 0.0) (cons 461 0.0) (cons 452 1) (cons 462 1.0) (cons 453 2) (cons 463 0.0) (cons 63 5) (cons 421 255) (cons 463 1.0) (cons 63 7) (cons 470 "LINEAR")))
The point variables pt1, pt2....pt8 are all defined. But when I run the code the hatch is not being created? Why?