AutoCad 2D :: How To Hatch Edge Boundary Of Texts
Feb 10, 2012How to hatch the edge boundary of the texts ?
View 6 Replies
ADVERTISEMENT
AutoCad :: Change Hatch From ANSI31 To GRAVEL Some Of Hatch Shows Outside Boundary
Aug 24, 2011I have a hatch (ANSI31) enclosed by a closed polyline. Whenever I change the hatch from ANSI31 to GRAVEL some of the hatch shows up outside the boundary. The Polyline consists of both arcs and line segments, and the hatching errors are occurring within the radius of the arc segments. Changing it from Associative to Non Associative makes no change.
I am using AutoCAD 2011.
AutoCad 2D :: Getting Error While Hatch Boundary
Oct 14, 2011why I get an error trying to hatch this. Its a closed Polyline.
Hatch issue.dwg
Edit: Or rather its 4 joined polylines.
AutoCad :: Invalid Hatch Boundary
Mar 16, 2012I have a problem in that a customer drawing, actually several cutomer drawings are not closed polylines. tHEY ARE REASONABLY SIMPLE PROFILES THAT i NEED TO CUT OUT ON A CNC ROUTER. mY PROBLEM BEING THAT AS THEY ARE NOT CLOSED the router software will not recognise them properly. Is there anyway to find out where exactly on the profile the gap is with zooming right in and panning around?
View 7 Replies View RelatedAutoCad :: Unable To Hatch Boundary?
Nov 30, 2011every time I try to hatch it come up with ‘Unable to hatch the boundary’ and it does this with all hatches except the SOLID hatch, why this is!
View 5 Replies View RelatedAutoCad 2D :: How To Hide Hatch Boundary
Aug 29, 2013I wish to hide my associative hatch boundaries. Is this possible to do as a permanent rule?
I have seen that you can apparently put them on a different layer then turn them off.
I used the select similar command but it chose all polylines (which i guess is what a hatch boundary is?)
AutoCAD Civil 3D :: Hatch Extending Beyond Boundary?
Dec 13, 2012I've attached a screenshot of the issue I'm dealing with. I have a closed polyline and when I first hatch the area it appears to be correct, but then I'll go do another command and then the hatch seems to extend beyond the boundaries of the polyline.
View 3 Replies View RelatedAutoCAD 2010 :: How To Show Hatch Boundary
Apr 27, 2011In 2010 I would select hatch, and then just drag grips around to where I needed them. Now in 2011, I select hatch and don't get the grips. How do I turn those grips back on?
View 7 Replies View RelatedAutoCad :: Hatch Inner Boundary Of Closed Polyline?
Jul 6, 2012I am trying to find a command that will hatch the inner edge of a complex closed poly line, rather than hatch the entire area inside the poly line.
When I have simple shapes such as a rectangle I create a smaller rectangle inside the first that is 1' (or whatever I want my hatched area to be) smaller on all sides than the first rectangle. I hatch by selecting the two rectangles; I change the "Associative" hatch property to "No" and then delete the inner rectangle.
My problem now is that I have a complex closed poly line that I would like to hatch the inner perimeter with a set thickness, say 1 foot. Is there an easy way to hatch a inner boundary of a closed poly line or to recreate a scaled down copy of the poly line that is a set distance smaller all around. I hope I have conveyed the question clearly enough.
AutoCad 2D :: Hatch Boundary Detection Process
Apr 12, 2012Annoying time spend waiting while acad automatically detects hatch boundary? - usually a boundary of some sort, thats completely useless anyway.
I'm seeking full control and want to select the boundaries myself and hope some of you can tell how to switch off or avoid this automatic process of boundary detection that usually follows "h" ↵ ( "hatch" ↵ or "bhatch" ↵ ).
AutoCad :: Valid Hatch Boundary Not Found
Jun 6, 2011i am trying to put a hatch down and am gettin this error 'Valid hatch boundary not found'. now am quite sure the area is enclosed so as far as i can see their should be an issue. the areas autocad is referring me to are are link together and have been replaced but i still get the same issue, when i max out the zoom their is only a tiny dot
View 6 Replies View RelatedAutoCAD 2013 :: Right Click On Hatch -> Generate Boundary?
Jan 7, 2014When you right click on a hatch pattern...
Is there a way to Generate only the perimiter boundary, without the 'islands'?
AutoCAD LT :: Hatch Spacing Too Dense Or Boundary Not Closed
Apr 25, 2013I have a line drawing from a draftsman. It was imported from some other program, but I'm not sure which. However, this has cropped up many times over the years on my drawings as well as others. It just is typically quickly remedied with a workaround.
The hatch spacing too dense issue requiring me to break up the area: this problem will occur on equally sized areas at the same zoom factor at which I just hatched an adjacent area. I have changed the "MaxHatch" variable environment from stock at 10k, to 100k, then to 1,000k; yet the problem persists. I don't have a particularly fast machine so by that point I decided there was no need to max the variable at 10,000k. There are no z variables in the drawing though it appears, almost randomly, to have plines or lines along the same length of wall.
The second issue is the closed boundary. This occurs on lines that are connected at all corners, even when I stretch and reconnect a line, though that is a very time consuming method. When I increase the hgaptol variable it will hatch bizzarre areas that have no relation to what I am attempting to hatch. This is also occuring even inside a REC that I created just prior to hatching due to error on the original layout. I have to hatch an object rather than select an internal point. It has become so obnoxious in this drawing that I decided to post with these questions.
AutoCAD 2013 :: More Than 10000 Hatch Boundary Objects Are Selected
Apr 9, 2013“More than 10000 hatch boundary objects are selected”,
In the attached screenshot, I wanted to make hatch for the indicated boundary but I got the message shown in the second screenshot (“More than 10000 hatch boundary objects are selected”)
The dwg file is stored in the link below:
[URL]
What is wrong with having any number of hatch boundary objects?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD 2010 :: Hatch Area And Delete Polylines Then Reconstruct Boundary
Aug 25, 2009I have several days of experience with Autocad 2010... The problem: I have many (a lot) polylines in my 2D drawing that are adjacent to each other, but not joined. What is a good way of joining them, so that those that "touch" each other become one? Maybe I can hatch the area, then delete polylines and then reconstruct the boundary?
View 9 Replies View RelatedEdge Animate CC :: Hiding Layers Via Boundary?
Aug 24, 2013I'm using Edge to set up animations for my portfolio pages. I'm working on several, but I'm still instinctively using Flash techniques that are different, or don't work with Edge. I'm trying to set up a kind of 'conveyor belt' with two belts, one on top and one below. Each belt will scroll and carry a word, and cycle in a loop so the words move back and forth through the machine graphics I have.
Is there a way to 'hide' an object beyond the opacity slider and keyframes/pin? Once the word is covered by the machine, I want it to disappear, but parts of the word which still haven't been carried inside the machine are still visible, so using the opacity slider is out until the whole word is inside the machine. But if I try to scale it, the shape changes while parts of the word are still visible.
One solution is to break each word into chunks of 3 letters or so, with individual layers for each cluster of letters. Then once each chunk is hidden, blink it out. But before I do that, I'd like to find out if there's a way to make a hard edge, or a boundary, somewhere on the stage, beneath which a specified layer becomes invisible, so that if an object scrolls past that boundary before exiting the stage, it gradually disappears. Is that possible? I'd prefer this way, because I plan to animate the 'belts' the same way for smooth scrolling.
AutoCAD Civil 3D :: Query Point Cloud Boundary Then Add All Points Within Boundary
Nov 9, 2012i need to know if there is any way to control the points in the point cloud.
1. either only import the point cloud in a polyline area i specify
2. add all the points within a boundary not limited to the pointclouddensity = 100, freaking default is 15 almost cost my job today. extremely stressed out right now.
i am talking about extreme lidar surveys. 1km 1km LAS/0.5m contours/xyz files times 355 of them. covers a 2km wide corridor. but i only need 100m wide after i define the road alignment. no need to have all the extra points.
right now i densify the heck out of it and end up like 5-12m points. decent but not good enough because the geotech is bitching about that accuracy is not good for some feasibility study. or is there any software i can do this besides civil 3d.
what i want can also do is automate the 'add points to surface" under point cloud and have the software do multiple boundaries without having me baby it over the night. right now every click is 5 minutes and adds like 400k to 1 million points. Civil 3D 2012
3ds Max :: Select Polygons Inside Edge Loop And Select Boundary?
Nov 21, 2012I'd like to know the alternatives in 3ds Max to these popular tools:
1-When you have selected an edge loop, let's say, on a plane, how to select the polygons inside that loop? At the moment I'm using the split tool as a (very bad) workaround.
2-When you have selected some polygons, how to select the edges on the "boudndary"? (kinda the opposite of the above) At the moment I'm using the detach as element and border selection as a (very bad) workaround.
AutoCAD Civil 3D :: Surface Boundary Only Showing Portion Of Surface Within The Boundary
Oct 24, 2012I used a 2d polyline to create a surface boundary for a surface created. The polyline is a closed loop. For the boundary type it is outer, unchecked Non-destructive breakline, and mid-ordinate distance = 1.
My problem is that when I do this I only get a small portion of the surface to show up within my surface boundary. If I don't have a surface boundary the entire drawing surface shows up no problem.
The purple polyline is my boundary and the light blue is the surface created within the boundary.
AutoCAD Visual LISP / AutoLISP :: Entmake A Hatch Entity From A Hatch Template?
May 2, 2013I am trying to entmake a hatch entity from a hatch template.
After entget the template hatch entity, i get the followings
Select object: ((-1 . <Entity name: 7ed11b78>) (0 . "HATCH") (330 . <Entity
name: 7efc7c10>) (5 . "737") (100 . "AcDbEntity") (67 . 0) (410 . "Model") (8 .
"SECTION-LABEL") (62 . 255) (100 . "AcDbHatch") (10 0.0 0.0 0.0) (210 0.0 0.0
1.0) (2 . "SOLID") (70 . 1) (71 . 0) (91 . 1) (92 . 1) (93 . 8) (72 . 1) (10
633596.0 5.79713e+006 0.0) (11 633519.0 5.79713e+006 0.0) (72 . 1) (10 633519.0
5.79713e+006 0.0) (11 633519.0 5.79708e+006 0.0) (72 . 1) (10 633519.0
5.79708e+006 0.0) (11 633500.0 5.79708e+006 0.0) (72 . 1) (10 633500.0
[code]....
Now I wrote the following code using the above data as follows
(entmake (list (cons 0 "HATCH") (cons 67 0) (cons 410 "Model") (cons 8 "SECTION-LABEL") (cons 62 255) (cons 10 (list 0.0 0.0 0.0)) (cons 210 (list 0.0 0.0 1.0)) (cons 2 "SOLID") (cons 70 1) (cons 71 0) (cons 91 1) (cons 92 1) (cons 93 8) (cons 72 1) (cons 10 pt1) (cons 11 pt2) (cons 72 1) (cons 10 pt2) (cons 11 pt3) (cons 72 1) (cons 10 pt3) (cons 11 pt4) (cons 72 1) (cons 10 pt4) (cons 11 pt5) (cons 72 1) (cons 10 pt5) (cons 11 pt6) (cons 72 1) (cons 10 pt6) (cons 11 pt7) (cons 72 1) (cons 10 pt7) (cons 11 pt8) (cons 72 1) (cons 10 pt8) (cons 11 pt1) (cons 97 0) (cons 75 0) (cons 76 1) (cons 98 1) (cons 10 (list 0.0 0.0 0.0)) (cons 450 0) (cons 451 0) (cons 460 0.0) (cons 461 0.0) (cons 452 1) (cons 462 1.0) (cons 453 2) (cons 463 0.0) (cons 63 5) (cons 421 255) (cons 463 1.0) (cons 63 7) (cons 470 "LINEAR")))
The point variables pt1, pt2....pt8 are all defined. But when I run the code the hatch is not being created? Why?
AutoCAD Visual LISP / AutoLISP :: Automatically Pick Up All Hatch And Solid Hatch Patterns
Aug 6, 2008I am in need of a lisp routine which will automatically pick up all hatch and solid hatch patterns within a drawing and change the colour to colour 254.
View 9 Replies View RelatedAutoCAD 2010 :: Open Hatch Edit Dialog With Double Click On Existing Hatch?
Apr 17, 2010It is no more possible open Hatch Edit dialog with double click on existing hatch. Now, this way opens only Properties
View 9 Replies View RelatedAutoCAD 2013 :: Missing Hatch Patterns In Hatch Library?
Jan 2, 2013Just downloaded Autocad 2013 and am missing quite a few of the standard hatches (siding, soldier, board and batten, etc.) What should I do to get them back. When I open old drawings with these hatches in them, they load just fine...but I am unable to hatch any new areas with these hatches (because they are not listed in the hatch library)
View 9 Replies View RelatedAutoCAD .NET :: Block Reference Hatch - Deleting Loops Within A Hatch
Feb 22, 2013I want to be able to add a Block Reference to a hatch. I'm adding the block reference to an ObjectIdCollection and the hatch is not taking it when using AddLoop().
So I thought maybe I needed to add the location of the polyline (curve-like) object that is member of the blockreference to the hatch, but I don't know how to get its ObjectId.
Hatch thisHatch = new Hatch();thisHatch.Layer = layerName;thisHatch.SetDatabaseDefaults();thisHatch.SetHatchPattern(patternType, patterName);thisHatch.Color = Color.FromColorIndex(ColorMethod.ByColor, colorIndex);thisHatch.Transparency = new Transparency((Byte)(255 * (100 - 60) / 100));tSpace.AppendEntity(thisHatch);transaction.AddNewlyCreatedDBObject(thisHatch, [code]........
Also, I'm trying to delete certain HatchLoop that is associated to a polyline but I don't know how to do it. I'm going through the loops in the hatch but I don't know what to do there. I wanna do this so I create a new and different hatch on top.
I think one could also copy all the loops except the one one wants to delete, but I'm not sure how to tell which one is the one I want to delete that is the one associated to a polyline or that is in certain region.
AutoCAD LT :: Hatch Button Does Not Activate Hatch Dialog Box
Dec 17, 2011I have AUTOCAD LT 2012 - windows 7 - SP1
Neither the button for Hatching or the Draw Hatch menu do not activate the HATCH DIALOG BOX?
This means I cannot Hatch?
I have also added the Hotfix for the Ribbon and it made no difference.
AutoCad 2D :: Hatch Command To Match Existing Hatch
May 6, 2013I've migrated from 2005 to 2014 LT and wondered if they have added to the hatch commands. I've looked and haven't found anything. Is there a command that you can pick a hatch pattern already shown on the drawing and make that pattern the existing one to use? I sometimes have multiple hatch patterns and scales, and wanted a quick way to go from one to another without lisp help.
View 3 Replies View RelatedAutoCAD 2013 :: How To Get Both Texts To Be Same
Sep 11, 2013I have received a drawing from an external source where there appears to be duplicates of various texts.
If I check the properties of the texts individually it appears the text is say P14, if I select both texts and list properties the result is varies. I have never seen this before and I would like to know how to get both texts to be the same.
AutoCAD Map 3D :: Positioning Texts From Styles
Nov 29, 2005The goal is to prepare maps of a water supply network. The pipes are polylines with parameters on OD Tabels.On Display Manager, i'm creating a style based on text in order to display the diameter of each pipe.So far so good. The problem is to find out how to place the text entities in a more intuitive position, that is, near the middle point of the polyline, with the correct angle.
On the "Position" and "Rotation" properties of the text style, what should i define in order tho achieve this? The ".labelpt, .Center, .X1Y1..." options do not produce the desired results.
AutoCAD 2010 :: How To Align Texts
Mar 1, 2012How to align texts in the AutoCAD?
I’m wondering if there is a way to align texts in the AutoCAD with no work around. For example, in the ArcGIS we can select the texts and force the alignment.
Sure, in the AutoCAD, I can force the text to have the same x-coordinate to align them or other kind of work around, but why we don’t have this as a command like what we have in the ArcGIS?
AutoCad 2D :: Change All The Texts To Table To Yellow?
Jan 7, 2014I'm trying to change all the texts to my table to yellow.Match Cell command didn't work.
How Can I do that?
AutoCAD 2010 :: Why Texts That Have Same Textstyle Don’t Change
Feb 15, 2012Why the texts that have the same "Textstyle" don’t change as the settings of the style change?
For example, suppose that particular texts have the T1 as text style. Then why if we change the value of “paper text height” of the T1 then the texts (that belong to this style) don’t respond?
At the same time, this behavior is valid pertaining the dimension style, i.e, if we change the text height of the dimension style then the dimension text responds and is changed!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.