AutoCAD 2013 :: How To Get Both Texts To Be Same
Sep 11, 2013
I have received a drawing from an external source where there appears to be duplicates of various texts.
If I check the properties of the texts individually it appears the text is say P14, if I select both texts and list properties the result is varies. I have never seen this before and I would like to know how to get both texts to be the same.
View 5 Replies
ADVERTISEMENT
Mar 14, 2013
How to add a particular annotation for multiple selected multiline texts,In the attached screenshots, all Mtext were selected but couldn’t figure out how to add a particular annotation scale to them!
For example, I wanted all the selected mtext to have the 1:100 as annotation scale but sounds not to work with me.
View 2 Replies
View Related
Nov 29, 2005
The goal is to prepare maps of a water supply network. The pipes are polylines with parameters on OD Tabels.On Display Manager, i'm creating a style based on text in order to display the diameter of each pipe.So far so good. The problem is to find out how to place the text entities in a more intuitive position, that is, near the middle point of the polyline, with the correct angle.
On the "Position" and "Rotation" properties of the text style, what should i define in order tho achieve this? The ".labelpt, .Center, .X1Y1..." options do not produce the desired results.
View 5 Replies
View Related
Mar 1, 2012
How to align texts in the AutoCAD?
I’m wondering if there is a way to align texts in the AutoCAD with no work around. For example, in the ArcGIS we can select the texts and force the alignment.
Sure, in the AutoCAD, I can force the text to have the same x-coordinate to align them or other kind of work around, but why we don’t have this as a command like what we have in the ArcGIS?
View 9 Replies
View Related
Jan 7, 2014
I'm trying to change all the texts to my table to yellow.Match Cell command didn't work.
How Can I do that?
View 5 Replies
View Related
Feb 10, 2012
How to hatch the edge boundary of the texts ?
View 6 Replies
View Related
Feb 15, 2012
Why the texts that have the same "Textstyle" don’t change as the settings of the style change?
For example, suppose that particular texts have the T1 as text style. Then why if we change the value of “paper text height” of the T1 then the texts (that belong to this style) don’t respond?
At the same time, this behavior is valid pertaining the dimension style, i.e, if we change the text height of the dimension style then the dimension text responds and is changed!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 4 Replies
View Related
May 22, 2012
As Topic explains, just realized ( to my embarrasment ) that I have just done every text in an entire drawing with text style "standard" instead of our own "ETR".
There is no difference in font/height/width or anything, reason I need to change it is because we need to send our drawing to our client in .dwg format and he will then copy everything we've done on the drawing and import it into his own drawing. Problem is if he doesn't use the same font as standard style as we do our text might be dislocated in some places.
Problem is many of my texts are attributes within blocks and they need to change too. Any quick and smart way to change every text and attribute on the drawing, nested or not to another textstyle?
AutoCad LT 2014
View 5 Replies
View Related
Jun 12, 2012
I wan't to export a DWG-file with texts to a sqllite database to be used i MapGuide. The export is successfull but I can't get the rotation of texts to work properly - all the texts are horizontally aligned and not rotated. For example, the ROTATION field of a text in the sqllite database has the value 4.8376865658545531 - in the DWG the rotation property is 192.0233g - but when using the ROTATION field as the value for Rotation in the style label it isn't being rotated.
View 9 Replies
View Related
Apr 20, 2013
i'd like to turn single texts into a multiline tex and KEEPING THEIR INDIVIDUAL COLOURS & TEXT SIZES.
View 4 Replies
View Related
Mar 20, 2013
I have access to a Map of a town. I would like to isolate a certain area of the town and make it bigger on the same page. But not let it link together, that way I can get some demensions in, delete some lines and texts which will not effect the overall map itself. I would just solely like to manipulate the blown up portion.
View 1 Replies
View Related
Sep 28, 2011
I have a problem in plotting. In layout, the whole drawing and text were shown, but in my output (printed drawing) the texts are incomplete.
09272011(001).jpg
View 9 Replies
View Related
Feb 1, 2012
Basically we have a number of different procedures that need to be written in each drawing. Usually we type it out every time which is a pain or copy paste. Is there any way to have 5 or so pre made text blocks to pick which to insert onto different types of drawings but that can be global used across a few systems? We have a small group of workers all on the vault server.
View 4 Replies
View Related
Nov 2, 2012
have some questions about annotative objects.
The first, if i have created many annotative dimensions and texts and with the time many scales get attached to these objects during editing ( the scales which i don't use on my layouts anymore but have used on these objects ones) How can I quickly and efficiently delete all the scales that are not in use on my layouts in my viewports for all the annotative objects?
the second question is how can I create annotative tags( dynamic blocks that can be scaled like annotative texts)?
View 3 Replies
View Related
Feb 7, 2012
I just switched over from 2005 to 2012. In 2005 I used Express Tools to change several lines of text to one mtext object. I can't find it in 2012. I didn't realize how much I used it until I lost it.
how to select several lines of text and convert it to one mtext object?
View 3 Replies
View Related
May 22, 2012
There is a very complecated drawing. Texts are on a line and crossing a line or something like that. Some texts has insertion points on the line. When the line is selected by LISP, only the specific texts with insertion points on the line are selected. Does it make sence?
View 8 Replies
View Related
Nov 16, 2012
The contour lines themselves are in model space. The contour texts are in paper space. How do I make the line hide under the text?
View 4 Replies
View Related
Jan 24, 2013
I need a LISP program to add a text given by user to all selected text.
in other words:
1- user selects some texts.
2- user give a text to program.
3- Program added this text to all selected text.
selected text: text1, text2, text3,text4,....,textn
given text by user: _xyz
Result:
text1_xyz, text2_xyz, text3_xyz,text4_xyz,....,textn_xyz
View 6 Replies
View Related
Feb 22, 2013
I'm trying to use diagnol fractions in my label text for 1/2 and 1/4 deltas. It displays and seems to work fine in Autocad, but when I plot, the numbers have trouble displaying themselves.
I'm using a light color from our .ctb, so I thought that was the problem, but that doesn't seem to be the case (I tried two heavier lineweights and it only got worse). Increasing the percentage size of the fraction also has no effect.
View 1 Replies
View Related
Mar 6, 2013
Lisp file to give texts a background.
It would be great if there is a lisp file that” manages to give all the texts (dimension text, leader text, attributes, regular text, text in blocks, fields, etc.) a WHITE background. This is quite essential since the text should not be overlapped with other objects and must be read easily on the plan sends all text (dimension text, leader text, attributes, regular text, text in blocks, fields, etc.) to front.
View 9 Replies
View Related
Apr 12, 2012
Arabic font in the AutoCAD,
I’m wondering why the Arabic fonts text appear correctly on the screen but when the they are printed then they are destroyed! Screenshot below.
Why the Arabic fonts texts fail to appear correctly when they are printed?
View 9 Replies
View Related
Jun 6, 2012
In Civil 3d 2013, my points appear as follows with Point # on top, elevation in the middle and description at the bottom.
But when I drag the label, it changes the order of the labels to Description on top, point # in the middle and elevation at the bottom.
How do I make the dragged state labels appear in the same order as the first picture?
Also, how can I keep the colors from picture #1 (red, yellow, green) into the dragged state labels as well?
View 7 Replies
View Related
Jan 18, 2006
I wanna get some more texts to add to my photoshop CS is there any free d/l's or anywhere i can sample the text?
View 1 Replies
View Related
Apr 16, 2007
I have been watching all your awesome sigs, and normal pictures role by with great quality. Yet, still ask myself .. How do you get such fancy texts?
View 1 Replies
View Related
Aug 16, 2012
I use Photoshop CS6 on Macbook retina, icons and texts on the toolbar are serrated.
View 1 Replies
View Related
May 28, 2009
I just purchased Adobe Photoshop CS4. And am trying to figure out how to write some texts on a graphic? Please let me know.
View 2 Replies
View Related
Jun 3, 2009
I'm not sure to explain this but I have a "S" shape path with texts on it. The problem was the base of the texts snap to the right side and I want it to snap it to the lelft side of the path. How do I do this in Photoshop CS4?
View 12 Replies
View Related
May 1, 2009
I am trying to create a tag/watermark to use in Lightroom. Everytime I try to create the backgroung to be transparent when I export it as a JPG it adds a white background?How do I export transparent images/text?
View 3 Replies
View Related
Jun 6, 2005
i tried so hard but still cant fit them with a perfect angle to a surface in a pic ...
View 3 Replies
View Related
Aug 24, 2007
I have a logo consisting of four (4) text elements (see attachment) that I would like to be able to create through an action. The problem I'm having is that the document is not always the same size and PS sees percentages for text placement. I need to have the text placed in relation to each other regardless of the documents size.
View 7 Replies
View Related
Aug 12, 2011
is there way to Fill letters of texts individually?
So for example if there is a word "HELLO", applying a linear-simple-fade fill from H to O, it handles the whole text as one. So first character is the most and the last one is the less faded.Could be done that individually the H-E-L-L-O five characters get the fade?
View 2 Replies
View Related