AutoCAD 2010 :: How To Show Hatch Boundary
Apr 27, 2011In 2010 I would select hatch, and then just drag grips around to where I needed them. Now in 2011, I select hatch and don't get the grips. How do I turn those grips back on?
View 7 Replies
ADVERTISEMENT
AutoCAD 2010 :: Hatch Area And Delete Polylines Then Reconstruct Boundary
Aug 25, 2009I have several days of experience with Autocad 2010... The problem: I have many (a lot) polylines in my 2D drawing that are adjacent to each other, but not joined. What is a good way of joining them, so that those that "touch" each other become one? Maybe I can hatch the area, then delete polylines and then reconstruct the boundary?
View 9 Replies View RelatedAutoCad :: Change Hatch From ANSI31 To GRAVEL Some Of Hatch Shows Outside Boundary
Aug 24, 2011I have a hatch (ANSI31) enclosed by a closed polyline. Whenever I change the hatch from ANSI31 to GRAVEL some of the hatch shows up outside the boundary. The Polyline consists of both arcs and line segments, and the hatching errors are occurring within the radius of the arc segments. Changing it from Associative to Non Associative makes no change.
I am using AutoCAD 2011.
AutoCad 2D :: Getting Error While Hatch Boundary
Oct 14, 2011why I get an error trying to hatch this. Its a closed Polyline.
Hatch issue.dwg
Edit: Or rather its 4 joined polylines.
AutoCad :: Invalid Hatch Boundary
Mar 16, 2012I have a problem in that a customer drawing, actually several cutomer drawings are not closed polylines. tHEY ARE REASONABLY SIMPLE PROFILES THAT i NEED TO CUT OUT ON A CNC ROUTER. mY PROBLEM BEING THAT AS THEY ARE NOT CLOSED the router software will not recognise them properly. Is there anyway to find out where exactly on the profile the gap is with zooming right in and panning around?
View 7 Replies View RelatedAutoCad :: Unable To Hatch Boundary?
Nov 30, 2011every time I try to hatch it come up with ‘Unable to hatch the boundary’ and it does this with all hatches except the SOLID hatch, why this is!
View 5 Replies View RelatedAutoCad 2D :: How To Hide Hatch Boundary
Aug 29, 2013I wish to hide my associative hatch boundaries. Is this possible to do as a permanent rule?
I have seen that you can apparently put them on a different layer then turn them off.
I used the select similar command but it chose all polylines (which i guess is what a hatch boundary is?)
AutoCAD Civil 3D :: Hatch Extending Beyond Boundary?
Dec 13, 2012I've attached a screenshot of the issue I'm dealing with. I have a closed polyline and when I first hatch the area it appears to be correct, but then I'll go do another command and then the hatch seems to extend beyond the boundaries of the polyline.
View 3 Replies View RelatedAutoCad 2D :: How To Hatch Edge Boundary Of Texts
Feb 10, 2012How to hatch the edge boundary of the texts ?
View 6 Replies View RelatedAutoCad :: Hatch Inner Boundary Of Closed Polyline?
Jul 6, 2012I am trying to find a command that will hatch the inner edge of a complex closed poly line, rather than hatch the entire area inside the poly line.
When I have simple shapes such as a rectangle I create a smaller rectangle inside the first that is 1' (or whatever I want my hatched area to be) smaller on all sides than the first rectangle. I hatch by selecting the two rectangles; I change the "Associative" hatch property to "No" and then delete the inner rectangle.
My problem now is that I have a complex closed poly line that I would like to hatch the inner perimeter with a set thickness, say 1 foot. Is there an easy way to hatch a inner boundary of a closed poly line or to recreate a scaled down copy of the poly line that is a set distance smaller all around. I hope I have conveyed the question clearly enough.
AutoCad 2D :: Hatch Boundary Detection Process
Apr 12, 2012Annoying time spend waiting while acad automatically detects hatch boundary? - usually a boundary of some sort, thats completely useless anyway.
I'm seeking full control and want to select the boundaries myself and hope some of you can tell how to switch off or avoid this automatic process of boundary detection that usually follows "h" ↵ ( "hatch" ↵ or "bhatch" ↵ ).
AutoCad :: Valid Hatch Boundary Not Found
Jun 6, 2011i am trying to put a hatch down and am gettin this error 'Valid hatch boundary not found'. now am quite sure the area is enclosed so as far as i can see their should be an issue. the areas autocad is referring me to are are link together and have been replaced but i still get the same issue, when i max out the zoom their is only a tiny dot
View 6 Replies View RelatedAutoCAD 2013 :: Right Click On Hatch -> Generate Boundary?
Jan 7, 2014When you right click on a hatch pattern...
Is there a way to Generate only the perimiter boundary, without the 'islands'?
AutoCAD LT :: Hatch Spacing Too Dense Or Boundary Not Closed
Apr 25, 2013I have a line drawing from a draftsman. It was imported from some other program, but I'm not sure which. However, this has cropped up many times over the years on my drawings as well as others. It just is typically quickly remedied with a workaround.
The hatch spacing too dense issue requiring me to break up the area: this problem will occur on equally sized areas at the same zoom factor at which I just hatched an adjacent area. I have changed the "MaxHatch" variable environment from stock at 10k, to 100k, then to 1,000k; yet the problem persists. I don't have a particularly fast machine so by that point I decided there was no need to max the variable at 10,000k. There are no z variables in the drawing though it appears, almost randomly, to have plines or lines along the same length of wall.
The second issue is the closed boundary. This occurs on lines that are connected at all corners, even when I stretch and reconnect a line, though that is a very time consuming method. When I increase the hgaptol variable it will hatch bizzarre areas that have no relation to what I am attempting to hatch. This is also occuring even inside a REC that I created just prior to hatching due to error on the original layout. I have to hatch an object rather than select an internal point. It has become so obnoxious in this drawing that I decided to post with these questions.
AutoCAD 2013 :: More Than 10000 Hatch Boundary Objects Are Selected
Apr 9, 2013“More than 10000 hatch boundary objects are selected”,
In the attached screenshot, I wanted to make hatch for the indicated boundary but I got the message shown in the second screenshot (“More than 10000 hatch boundary objects are selected”)
The dwg file is stored in the link below:
[URL]
What is wrong with having any number of hatch boundary objects?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD 2010 :: Open Hatch Edit Dialog With Double Click On Existing Hatch?
Apr 17, 2010It is no more possible open Hatch Edit dialog with double click on existing hatch. Now, this way opens only Properties
View 9 Replies View RelatedAutoCAD Civil 3D :: Show Site Boundary On Multiple Cross Sections
Mar 19, 2012I've got a series of cross sections that show an existing and proposed scenario and I need to show the location of the site boundary on the (multiple) sections.
I tried making a feature line from the site boundary but all the feature lines get projected - how can I just get the site boundary to be shown?
AutoCAD .NET :: How To Show Hatch Dialog Box
Oct 28, 2013Is it possible to show hatch dialog box using .NET?
I have found one old issue (link) but it does not work with AutoCAD 2014.
AutoCAD Map 3D :: PDF Don't Show Big Gradient Hatch
Jul 3, 2012In autocad map 2011 x64 and autocad map 2013 x64: Steps to reproduce Create a custom paper (900 x 1200 mm) for DWG to PDF Plotter (in model or layout tab) Draw (in model view) a rectangle. Hatch the rectangle with 2 colors gradient. Plot with great scale (big rectangle). The resulting PDF haven't the hatch. If the hatch isn't a gradient hatch, the PDF looks the hatch ok. And if there are many hatchs the pdf don't show the big gradient hatch.
View 2 Replies View RelatedAutoCAD 2010 :: Area Boundary Can't Close
Apr 11, 2012Suddenly I got this issue when I draw an area boundary its not possible to close it with "enter" or "spacebar"..
View 9 Replies View RelatedAutoCAD 2010 :: Hide Wipeout Boundary
Oct 7, 2013I am working with a situation that requires me to block some lines underneath some text, and can't use a background mask because the text is located within a block. I tried to use wipeout, but I don't want the boundries of the wipeout to plot. Is there a way to set the boundries to not plot? I have tried changing the color of my wipeout object to 255, but for some reason I was unable to get that to work (I think that has to do with how my company uses plot styles to handle colors).
View 3 Replies View RelatedRevit :: Draw Filled Region Boundary Lines That Show Up In Any Color?
Jan 23, 2012How to draw filled region boundary lines that show up in any color other than gray? it is hard to distinguish the lines I am drawing from the lines that are already there while creating or modifing a boundary. Can I change the color of the Invisible Line (can't find that line modify)? OR does every line created thru manage line style have to have a weight (am I able to make a zero line weight or even a pattern that shows nothing.
View 1 Replies View RelatedAutoCAD 2010 :: Multiline Boundary Not Wrapping Text?
Feb 12, 2013I am trying to create an attribute with multi-text and I am unable to get the text to wrap. I have the boundary width option checked and specified, but the text doesnt seem to care and keeps right on going....
View 4 Replies View RelatedAutoCAD Civil 3D :: Query Point Cloud Boundary Then Add All Points Within Boundary
Nov 9, 2012i need to know if there is any way to control the points in the point cloud.
1. either only import the point cloud in a polyline area i specify
2. add all the points within a boundary not limited to the pointclouddensity = 100, freaking default is 15 almost cost my job today. extremely stressed out right now.
i am talking about extreme lidar surveys. 1km 1km LAS/0.5m contours/xyz files times 355 of them. covers a 2km wide corridor. but i only need 100m wide after i define the road alignment. no need to have all the extra points.
right now i densify the heck out of it and end up like 5-12m points. decent but not good enough because the geotech is bitching about that accuracy is not good for some feasibility study. or is there any software i can do this besides civil 3d.
what i want can also do is automate the 'add points to surface" under point cloud and have the software do multiple boundaries without having me baby it over the night. right now every click is 5 minutes and adds like 400k to 1 million points. Civil 3D 2012
AutoCAD Architecture :: How To Show Beams (in Front) Of The Hatch
May 6, 2013I have a shed roof with a series of beams. The roof has a hatch. In the RCP, how can I show the beams "in front" of the hatch? I've tried changing the view to Hidden, but that gives me the top of the roof, not the underside... Also, many of the floor items (such as kitchen cabinets) are showing.
View 4 Replies View RelatedAutoCAD 2010 :: Raster Image Cpipping Boundary No Grips
Aug 4, 2011I'm having a small problem in AutoCAD 2012. I can't get any grips on any inserted raster image Cpipping Boundary I try to edit. I can select the edge and the line turns into a dashed line, however no grips. The grips work fine on any vector line. Is there a comand to turn on the grips?
View 6 Replies View RelatedAutoCAD 2010 :: XClipped Block Appearing Outside XClip Boundary
Oct 24, 2012I have drawn a special brick pattern that I need to use at the hatch for a three story building. The idea was to draw the pattern on a large scale and then use xclip or clipit to crop the pattern to the openings in the wall, i.e. windows, doors, etc. The polyline that I'm using to clip the brick pattern block is quite complicated. When I use it to clip the block, stray lines appear OUTSIDE the boundary. The xclip frame does match the boundary I want. Note, the entire block isn't appearing, just a row of lines here and there. It's obviously a glitch of some sort.
View 1 Replies View RelatedAutoCAD .NET :: Add Hatch Fill Polyline Area - No Error But Doesn't Show
Oct 25, 2011I need to add a hatch fill polyline area but leave the text island out. What I did is put put Polyline ID and Text island ID into an ObjectIDCollection. The code doesn't throw any error but I can't see the hatch.
Public Function AutoCADAddHatch(ByRef newAddedHatch As Hatch, ByRef HatchElementIDs As ObjectIdCollection, ByVal HatchColour As Autodesk.AutoCAD.Colors.Color,
_ ByVal HatchLayerName As String, Optional ByVal PatternName As String = "SOLID", Optional ByRef strError As String = "") As Boolean
Dim db As Database = acApp.DocumentManager.MdiActiveDocument.Database
[Code] ......
AutoCAD Architecture :: How To Show Wall Surface Hatch In Elevation View
Mar 26, 2011ACA 2011. I would like to copy the "standard" wall style add a surface hatch and display that in an elevation (exterior) view. I have played around with this and due to many different places to edit the materials.
I have the elevations created. When I go back into the construct and edit the wall style do I have to re-create the elevations to see the hatch? Or I think I just have something set incorrectly in the style.
AutoCAD 2010 :: Hatch Not Plotting In PDF
Feb 8, 2012The AR-Sand hatch is visible in a published pdf file, but does not plot.
View 1 Replies View RelatedAutoCAD 2010 :: Unable To Hatch
Feb 13, 2013How to hatch this pool deck with sun chairs (blocks)? I have included an attachment ...
View 8 Replies View Related