AutoCAD 2013 :: Objects Have Went Invisible?
Nov 2, 2013
Okay so im doing a coursework for university on autocad 2014 education version, at home i had done a vast amount of work on my laptop, went to university opened the file off the usb stick i have it saved on and done some more work to the coursework and saved it. Now that i try to open the file on my laptop some very few objects appear, all the layers are set to visible
Edit - each time i re-open the file some different random objects become visible while otheres dissapear.
View 5 Replies
ADVERTISEMENT
Aug 9, 2009
I work on DWG importer and every now and then I come across some files which behave strange. To take as an example, I am working on a file reported to be having unwanted entities when loaded through our importer. This file when loaded in AutoCAD shows proxy entity and nothing else. When I do "zoom to extents" and select the visible entities by selection window, it shows
Select objects: Specify opposite corner: 5767 found, 1988 groups
Now if I do the selection and say "select: all" instead of using selection window it shows:
Select objects: all
5805 found
9 were on a locked layer.
2 were not in current space.
So apparently there are 38 (5805 - 5767) objects which are either invisible or ignored by AutoCAD when I do "zoom to extents".
1. Is there any way in AutoCAD to make all the objects visible?
2. Why "Zoom to Extents" must be ignoring these objects?
3. What is the meaning of "2 were not in current space."? Does that mean, that the drawing file is simultaneously referring to two Coordinate Systems?
View 9 Replies
View Related
Oct 17, 2012
Soms of the objects in my 3D view "disappear" when clicking on it. The edges are still visible while the rest of the objects get invisible. This is only the case for some objects in my 3D view. I have no problem with the visibility of the objects in the structural plans or elsewhere. How can I make all objects visible in 3D again when clicking on them?
View 3 Replies
View Related
Jul 22, 2013
All the object on the scene are invisible in 1 viewport, even if I switch the viewport to other cameras they are still not visible.
I have tried changing the shading styles, other things like clipping, xview. Even restarted 3ds max for that matter but no luck.
View 2 Replies
View Related
Jul 4, 2012
i'm trying to produce a layout using solview and soldraw in autocad 2013, but have come across a very frustrating problem, autocad lets me create the top, side and front view no problem, when i start to dimension the views the dimensions in the top and side view are fine but the dims in the front view are invisible, the command works as normal but no dims are visible, i have checked the freeze/thaw for all views but to no avail, the only other thing i can think of is that autocad has created an incorrect view and i'm dimensioning something that i simply can't see, if this is so how could i get around it.
View 9 Replies
View Related
Apr 4, 2013
I have a large number of objects, paths, multiple copies, texts etc. under the visible (on the top) object which is larger and completely covers all unusable object bellow. How can I easily delete or weld INVISIBLE objects from composition?
View 7 Replies
View Related
Sep 10, 2013
Here's a new one for me. All the hatch in a drawing file 'vanished'. Can't pick it, can't see it - layer is on and thawed.
I used FILTER to select all the hatches on the layer, and wblocked them out. File is attached, just rename from the .zip extension to .dwg
I still can't see them, or pck them. Auditing will remove the associativity, but that's about it. Still nothing to see.
View 5 Replies
View Related
May 9, 2013
I have been working on a detailed section drawing in AutoCad 2013
I saved the file in different files as i gone along, I have been trying to open the file everytime i do all the layers are there but only two are visible all the other seem to be invissible.
I tried it with each file on different computers, same version of AutoCad no success.
It apears that in the preview before opening the file it is all there but when actually opening the file its only a random two layers that come up, missing around 10 others which have the majority of the drawing /details on there.
I tried the unhide, changing line weights in the layer menu, opening the back ups. is there anything else I can try.
View 9 Replies
View Related
Jun 21, 2012
How do I select a vector object whose property has been set to invisible? I am using PSP v7.04
View 2 Replies
View Related
Sep 28, 2012
Press/pull has been working fine up until now. When I try to press/pull a boundary, it creates an invisible extrusion rather than cutting into the object.
View 3 Replies
View Related
May 2, 2013
A user is having problems when using the copy command in AutoCAD 2013.
When they select objects, its not reporting on the commandline how many objects its found or keeping a running total of objects selected. Not even any duplications...
I've tested it on my machine but i cannot replicate the issue and have never come across this before!
Is it a bug? Is it a variable? User setting etc.
View 9 Replies
View Related
Jan 8, 2013
The firm at which I am currently consulting uses AutoCAD 2014. My system at home has P&ID. I don't use the object/3d features -- it is just the version of AutoCAD that I wound up buying. (I think it was on special or something.) In any case, some of our drawing files have become too cumbersome to use, especially on the machines at the office, and I wonder if my P&ID is the culprit. The large files appear to have AEC objects that are bogging them down, but nobody has ADT, so we are unsure from where these objects are coming. They may be coming from the client, but I wonder if they are coming from my system. Does P&ID automatically create AEC objects and, if so, is there a way to keep it from doing that?
View 2 Replies
View Related
Mar 13, 2013
I am having problems to scale 2d objects I use the command scale but when it request a base point it said "extremely small scale factor ignored" I have to do this 5 or 6 times until the command works.
The other thing is that I can not do a 1 dimension scale in 2D.
View 1 Replies
View Related
May 2, 2013
Just upgraded to 2014...How do you 'unselect' objects? It used to be hold down the shift key and click on the objects, but it's not working
View 9 Replies
View Related
Jun 13, 2012
When I type in the command "SC" for scaling the object, it'll asks me to specify base point then I can enter what scale I want it to be, such as 2 times or 0.5 for half sacle.
with the new 2013 version, sometimes it'll exit the command if I select the insertion point of the block or if the object is at the 0,0,0 location of the drawing. it'll also give a message of "the scaling factor is too small". But I haven't enter what scale I want to scale the object yet.
View 1 Replies
View Related
Dec 6, 2012
I have an array of all the same block with a few attributes. All attributes need just slightly different data (like incrementing numbers). It is extremely tedious to select the block, enter the data, cancel the selection and then select the next block. Is there an easy way to select all the blocks up front and then modify them one at a time by "cycling through the selection"? I'm specifically looking for a key-command that will de-select the current block and select the next one so I can stay in my properties window.
It's also worth mentioning that I'm on LT and there aren't enough blocks to make ATTOUT/IN worth it (or possible).
View 2 Replies
View Related
Sep 10, 2013
I have a lot of polylines that are all over a drawing from an outside source. Unfortunately the only unique properties about them are:
AREA = .14 sq in
PERIMETER = 1-11/32"
Everything is on the same layer, color by layer and are at the same elevation.
Any way to select just these closed polylnes? I tried quickselect but the AREA option did not work (it wouldn't except just the .14 value), and there is no apparent PERIMETER value to select.
View 3 Replies
View Related
Jul 3, 2013
I just installed Acad v. 2014. I opened up an existing file, went to select a line, but noticed that the line does not highlight when I hover over it like my last version. How do I change the settings so that when I hover over an object, whether it be a line or a cross hatched area, it will highlight that object so I know the length or area of the object?
View 4 Replies
View Related
Mar 20, 2013
In regular conditions de elevation of every object that I creat is Z= 0
Lines starting and ending points are at this level, circle centers -and circles as objects- polylines etc.
How is possible to setup a different elevation for my objects?
Second case: Just in case I rotate my UCS and having my drawing doing all my objects in the plane X-Z therefore my coordinate Y as default for every object, could I set up the Y coordinate as required?
View 1 Replies
View Related
Jul 3, 2013
I'm trying to print a 2D drawing but I would like to add the 3D solid for viewing reference. I can't seem to "flip/rotate" my 3D solid to obtain an isometric view while looking at my 2D drawing from the top view.
how I can get both items to print on a single plot?
View 6 Replies
View Related
Apr 22, 2013
I am having duplicate objects in my files and I am wondering if they could be deleted. I think that I saw the option to select these kind of objects but now I need a remainder so I can get rid of the unnecessary stuff.
View 2 Replies
View Related
Mar 17, 2013
I am just getting back to autocad after using vectorworks for a few years. In vectorworks I was creating smart walls and plugging in windows, doors ect.
Are intelligent objects only used in Revit? Are people still offsetting wall lines and creating their own windows and doors and cutting out openings in Autocad theses days?
View 2 Replies
View Related
Feb 28, 2013
Showing annotation objects, I’m wondering how the two options “show annotation objects for current scale only” & “show annotation objects for all scales” introduce the same result (attached)! Despite the fact that these annotation objects are assigned to other scales (attached)
In these two cases, the only displayed annotation objects are those related to the current scale! Not all the annotation objects are displayed!
View 6 Replies
View Related
Jun 10, 2013
I am currently drawing a lithography mask in Autocad 2013 student version, where I created a lot of arrays. My problem is that I can't seem to align these structures. Some of them need to be aligned along the y-axis and some along the x-axis.
View 5 Replies
View Related
Sep 20, 2013
After setting up a layout tab, all of my objects turned light grey. When I went to model space they were the same. if I list an object the color says bylayer but the display (in model space or in paperspace remains grey even afret doing a regen, or closing the drawing and reopening it.
View 3 Replies
View Related
Feb 7, 2013
Let's assume we have a square drawn and another smaller square inside of the larger square. If i want to figure out the area of the larger square less the area of the smaller square but adding the perimeter of both squares, how do i do that? I know i can select the square and the properties tab will provide the area and i know i can use the area command and choose "subtract area" and do it that way. But my friend tells me theres a way by just selecting both objects that the properties tab will automatically do that for me. But when I select both objects, the properties tab under geometry would just say "varies" and not do the math for me.
I don't know if this provides additional information but he says somehow both objects are linked, like a block where its really one object and not 2, but when you explode it, it becomes 2 objects and therefore will now say "varies" on the properties tab as opposed to doing the math.
View 7 Replies
View Related
Aug 13, 2013
Is there any (non programming) solution where I can add custom data/properties to objects in plain AutoCAD?
(I know I can in Civil 3D though, using Notes/Extended Properties etc etc)
We want to allow users to add their own unique ID to all their drawn objects, and we don't want to use Entity Handle as that is not anything we can choose ;-)
We're using that ID to connect other datasources (ODBC) to Navisworks and we would like it to work even from AutoCAD, even though we have Civil 3D inhouse.
using plain AutoCAD straight out of the box?
View 9 Replies
View Related
Feb 28, 2013
Is there a way I can break multiple ojects at once? For example, I have a row of consecutive circles (shrubs on a landscape plan) that overlap. I would like to elminate just the overlapping portions.
View 2 Replies
View Related
Sep 22, 2012
Learning to use Autocad Electrical 2013. When I edit a symbol such as a circuit breaker, I can't find the linking information for the control panel object.
I know where the panel object dwg file is for the symbols that are included from Autocad. To create a new panel object dwg for the "Panel Layout" in Acad E, I can't see where it is attached, or how it is referanced.
I not sure I made my self clear enough. I didn't see it in block edit for the symbol.
View 1 Replies
View Related
Apr 24, 2013
I have a problem. When zooming, 3D shaded objects fade away (everything except 2D Wireframe) and it is almost impossible to continue work (see attachment no1). If I manage to draw something on such a faded object (eg, a circle on the side of the box), only part of the screen / object has normal visibility (see attachment no2). Re zooming again cause fading.
Computer configuration:
Core i5-2410M; 6 GB RAM
Radeon 6650M; 1 GB VRAM
View 4 Replies
View Related
Jan 16, 2013
Is it possible to bring hatch above all the other objects and cover everything there is below? Even if I go from hatch edit to draw order and bring it to fornt the elements below hatch are still visible also transparency is "by layer" and is set to 0
View 6 Replies
View Related
