I stuck with designing box similar object. I want to "dress" object with honeycomb texture, but don't know how :/. I googled and found exactly what I want: [URL]........
View 2 RepliesI have some photos of my wife in a dress that came out pretty nicely. The only issue is on the day we took the photos it had just rained and the bottom edge of the dress got wet.
I want to know if it is possible to use gimp to remove the water / wetness from the dress so that the photos look like the whole dress is dry.
Edit:
Attached Photo of the dress.
Attached File(s) IC-712.jpg (438.88K)
Number of downloads: 12
How to "Turn ON" Texture Compression?
Autodesk AutoCAD Map 3D 2014
Windows 7 Professional
Service Pack 1
Intel(R) Core(TM) i5-4430 CPU @ 3.00 GHz
8.00 GB RAM
I've been searching around and I'm hoping that if I post on forums someone can help me. I need to add a texture to an object in a picture. The picture is of real world objects.
View 2 Replies View RelatedI created a 3d model in Pro/E Wildfire and opened it in photoshop CS5. I am trying to add an image to the top of the object. When I go into the 3D (Materials) tab and then click load texture (after clicking the folder next to 'diffuse'), the texture that is loaded is very distorted.
How can I add an image to the top of a custom 3d object without it being distorted?
I have attached a few files to illustrate what I am trying to accomplish and the problem.
I used to know how to put transparency maps on the same object as a texture map. the biggest problem I am running into is the file format, I have been looking on line through forums and tutorials but I get conflicting results. I got one to work at one point but then it reverted to showing the alpha bmp instead of the texture. gah getting frustrated. also when I was making the alpha channel some how it gave the black/white boarder area fuzzy division. maybe I didnt make it right some how.
what file formats to use and the proper way to make an alpha map for transparency?
How can I make an object "paint" the texture on another object? Examples of usage are footprints, bullet holes, scratches, skid marks, a pen drawing, etc. I couldn't find anything about this on the web.
View 9 Replies View RelatedI don't mean use a video as a texture on say a square. I mean how like in this video, the texture is applied on the collapsing parts.
View 6 Replies View RelatedI'm working on an online store for flamenco products. We have wide range of dresses and shoes and it's almost impossible to get good quality photos for all of them.
My main concern is that I would like to present all different color options in decent quality imagery. I was thinking of taking the best image for each and simply photo shopping the colors.
Seeing that I will have to do a lot of color options for a lot of dresses and shoes. Moderately quick, decent quality and adaptable to bulk photo shopping.
Basically meaning that I cannot put the care and detail I would if I just photo shopped a single image, I don't need high res pixel perfect quality. It should just look decent and I should be able to do it in a moderate amount of time.
I had a formal a few weeks ago, and I went and ruined a photo which I really liked by going and spraying perfume on my dress and leaving dark patches.
View 5 Replies View RelatedI've read all the posts about color replacement, but I still can't get it right. I'd like to make the color of her dress gold to match the couch. I tried using the eye dropper,
View 9 Replies View RelatedI need to texture an object and selected the parts I want to texture, but I need to copy+paste a texture into it. Meaning, I select an area, I copy+paste into the area without a giant square of texture covering everything up.
View 5 Replies View RelatedI am using Xara Designer Pro7 and i want to do something like this [URL] Is it possible with Xara?
View 8 Replies View RelatedIs there a way to copy the "render to texture" settings of one mesh to another?
View 3 Replies View RelatedUsually when creating a fillet weld it displays a texture of a wavy surface. I can only get a smooth surface. Is there a way to modify weld appearance to what I'm used to?
View 2 Replies View RelatedI'm trying to assign a jpg file to an eyeball and the file (containing the retina of the eyeball) comes out enlarged, even though it is not supposed to.
I'm using Blinn Material and hypershade to bring that texture to the eyeball, but every single time I try it, it comes out enlarged (see image attached). I've made sure I click on the Planar Mapping key before I try to copy the image onto my eyeball. I've also tried modifying the size of the image on Photoshop but not luck. If it matters, I'm using Windows 7.
I'm trying to change the colour of a pink dress to red, blue, green etc. I need to keep the detail on the dress.
I also need to use exact colour codes - instead of just red, green etc from the colour chart. can this be done?
I have keyframed some ojects. I then set up a camera projection texture at keyframe 179
Is it possible to create a Texture Reference Object from keyframe 179 so this texture will stick to the geometry throughout the sequence?
when the Prosteel Object Enabler for AutoCAD 2013 will be available.
View 4 Replies View RelatedTrying to utilize a .sid file within Standard AutoCAD 2013, all suggestions point to an Object Enabler but notice that for 2013 all are for Civil 3D, Plant...
Is there an object enabler for Standard 2013?
after working for a while with Max 2013, i have noticed that texture display in viewport is a very poor quality compared to Max 2012, and it is same with display of environment map in viewport.
I have found some ways to manually set texture quality in viewport here, but i would like to know if there is any way to make Max 2013 viewport texture display EXACTLY IDENTICAL to way it was in Max 2012.
For example, if i manually change nitrous texture resolution, then resolution improves, but if i display some environment bitmap in viewport, i get extreme lag when minimizing/maximizing viewports. About 2-10 seconds to minimize/maximize viewport lag whenever there is an environment map displayed in any of the viewports. As soon as i disable display of environment in viewport, viewport minimize/maximize task is instant again.
In Max 2012, when i display enviro map in viewport, i have absolutely no delay in minimizing or maximizing what so ever.
So i would like to know how i can make Max 2013 display same quality of textures as Max 2012, and make it perform same way as in Max 2012 (no lag when switching viewports).From what i understand, viewports in 2013 should be optimized, therefore actually faster, not slower.
When I try to use my brushes with actions in Photoshop, such as Save the Dress, Ying-Yang, or Foundation, they won't work. I've tried resetting the brushes, changing the opacity, restarting the program, and unlocking the layers. It was working perfectly, but suddenly just stopped. When I click on the image, it doesn't do anything. There is also a small black box next to the action the I am using in the history box. When my brushes were working, that box would show in white where I used the brushes on my pictures, but now it doesn't register anything that I try to do.
View 4 Replies View RelatedHow does one create a texture similar to this?
View 2 Replies View RelatedFor my 3D scene, I have to use a texture file on the floor. If I use the only file, than it looks really boring and below par. What I want is, I want to generate some (around 6-8) texture files within the original texture file - so the colors of all the texture files remain same but only the texture varies.Likewise there are more than 500 texture files and I just can't do them manually. Is there any way out to do this in Photoshop?
View 3 Replies View RelatedI have a lava texture and a ground texture. I'd like to be able to make some cracks on the ground texture that would show through the lava texture below it. Something like a cracked mud look. I would be using this for a game I'm making form some terrain textures. Are there any plugins that would aid in making these transparent cracks and perhaps even add depth to the cracks?
I guess a spider web where the spider was on crack would be something I'm looking for. Similar to the following image:
Lava Ground
I have documents from an architect that still hand drafts. I am trying to bring their drawings in via the Snapshot Tool in Adobe Acrobat and pasting into AutoCAD 2013 so I can overlay the structural notes in paperspace. And then send to plot making .pdf files. The thing is, some of the viewports are showing up in the plot and some are not. All settings in the properties pane are the same. All are on Layer 0.
View 3 Replies View Relatedhow to un-link and ole object (pdf) in 2013. Also, how do I insert it without it linking. The insert ole dialogue box gives an option to link or not, but then it will not insert the pdf.
View 4 Replies View RelatedI have an Wood works Sizer to size beams and columns. What I normally do is insert an OLE object for a beam component right into Autocad. In older versions of Autocad, I could then double click on the ole object and design the beam right from autocad.
I have tried inserting one of these ole object (as a file) into Excel 2010 and everything works as expected. However, when I insert the same file (Insert...Object...From File) it is inserted as a Package. If I double click on the OLE icon I am taken into a dialog "Create Package" asking me to type the name of the file I want to package. I can't get autocad to open the source application to edit the OLE object.
If I look at the same process with inserting an excel spreadsheet, the source object will say Excel and everything works fine when do an ole open.
Is there some way to change or register a source application for my custom file type? I notice that my application is not listed in the Insert Object - Create New object type list.
How to add text on 3d object.
View 2 Replies View RelatedI got the notice as below when open the drawing :
Where missing aplication and proxies come from?
How to a add a new property for a 3d object created in Autocad ?
View 6 Replies View Related