AutoCAD 2013 :: Where Proxies Object Come From
Jun 11, 2013I got the notice as below when open the drawing :
Where missing aplication and proxies come from?
ADVERTISEMENT
AutoCAD 2013 :: Using Live Maps Within Proxies Enterprise Environment
May 7, 2013I have an issue trying to connect to Live Maps. How to implement this through a proxied enterprise environemnt. I've read the posts to use :
Authenticated Proxies:
To use the above mentioned AutoCAD Online components through proxy servers with Authentication enabled, you should enable http (port 80) and https (port 443) access to the following domains in the proxy without Proxy Authentication (i.e. Access for “All users” or Anonymous access through the proxy):
*.autodesk.com
*.google-analytics.com
*.cloudfront.net
We don’t proxy ports 80 and 443 directly (we use 8989-9093 for proxy ports), so I don’t see any way of meeting these requirements at the present time, at least in the wired Enterprise network.
3ds Max :: Script For Scatter Proxies On Surface / Spline
Oct 9, 2011I'm looking for a script for scattering proxies on a surface or along a spline. In previous versions of Max I used Peter Watje Scatter. But itdoesn't seem to be available for 2012.
I don't have enough use for it to justify buying Carbon scatter or multiscatter and I find render farms don't tend to have these plugins anyway. Forest Pack lite only works on flat surfaces.
AutoDesk Smoke :: Render Proxies From Frame X
Aug 28, 2013I have a very long sequence on CFX (3000 frames). Its a pain everytime a have to render in proxies (30 min). Is there a way to render in the timeline on proxies and from a certain frame? The default is a render starting at frame 1.
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
AutoDesk Smoke :: Cannot Send Proxies To Backburner
Aug 26, 2013I started a new project and for some reason I can no longer send footage to backburner to crate proxies.
After dragging my AVC-Intra clips onto the folder in media hub I get a quick message in the bottom left corner that basically says that smoke cannot connect to backburner on port 0.
I can ping localhost and also backburner via the terminal with no issues, its just that Smoke cannot "see it". No jobs show up in the backburner manager.
Runnign Smoke Ext 1
MacBook Pro Retina 15" - OS X 10.8.4 - 4TB G-tech G-Raid - Smoke 2013
MacPro 5,1 - OSX 10.8.5 - 64GB Ram - 12TB Pegasus RAID - 24 inch HP DreamColor - Smoke 2013 - Maya 2013
AutoDesk Smoke :: Proxies And Renders On Different Storage?
Jun 12, 2013How can I decide to have all my proxies on one location and full renders on another storage location... I can add more locations, but how to send all proxies to one location and full to another ?
View 1 Replies View Related3ds Max Animation :: Tree Proxies Slowing Render Time
Jun 26, 2011I'm animating a scene with a lot of trees in the background. I'm using forest pack with proxies of xfrog trees. The scene needs to look as realistic as possible but unfortunately, even though they are proxies, the trees are killing my render time.
Any good way that I might be able enhance render time but keep the quality? Maybe another solution to placing trees without using forest pack/proxies?
Autodesk 3ds Max 2010
AutoCAD 2013 :: Prosteel Object Enabler For 2013
Sep 19, 2012when the Prosteel Object Enabler for AutoCAD 2013 will be available.
View 4 Replies View RelatedAutoCAD 2013 :: 2013 Object Enabler For SID File
Mar 20, 2013Trying to utilize a .sid file within Standard AutoCAD 2013, all suggestions point to an Object Enabler but notice that for 2013 all are for Civil 3D, Plant...
Is there an object enabler for Standard 2013?
AutoCAD 2013 :: OLE Object Not Plotting In PDF
May 24, 2013I have documents from an architect that still hand drafts. I am trying to bring their drawings in via the Snapshot Tool in Adobe Acrobat and pasting into AutoCAD 2013 so I can overlay the structural notes in paperspace. And then send to plot making .pdf files. The thing is, some of the viewports are showing up in the plot and some are not. All settings in the properties pane are the same. All are on Layer 0.
View 3 Replies View RelatedAutoCAD 2013 :: Unlink And OLE Object (PDF)?
Apr 26, 2013how to un-link and ole object (pdf) in 2013. Also, how do I insert it without it linking. The insert ole dialogue box gives an option to link or not, but then it will not insert the pdf.
View 4 Replies View RelatedAutoCAD 2013 :: OLE Source Object
Dec 5, 2012I have an Wood works Sizer to size beams and columns. What I normally do is insert an OLE object for a beam component right into Autocad. In older versions of Autocad, I could then double click on the ole object and design the beam right from autocad.
I have tried inserting one of these ole object (as a file) into Excel 2010 and everything works as expected. However, when I insert the same file (Insert...Object...From File) it is inserted as a Package. If I double click on the OLE icon I am taken into a dialog "Create Package" asking me to type the name of the file I want to package. I can't get autocad to open the source application to edit the OLE object.
If I look at the same process with inserting an excel spreadsheet, the source object will say Excel and everything works fine when do an ole open.
Is there some way to change or register a source application for my custom file type? I notice that my application is not listed in the Insert Object - Create New object type list.
AutoCAD 2013 :: Add Text On 3d Object?
Dec 23, 2012How to add text on 3d object.
View 2 Replies View RelatedAutoCAD 2013 :: How To Add Property For 3D Object
Apr 25, 2013How to a add a new property for a 3d object created in Autocad ?
View 6 Replies View RelatedAutoCAD 2013 :: Cut Object With Mesh?
Sep 25, 2013I have surface (that appears to be watertight) that I created with meshlab. I would liek to import it to AutoCAD and create a solid where this surface is cut out of it (e.g. I'd be left with a imprint that looks like the surface).
What I've done so far:
- I've exported a dxf file from Meshlab.
- It's unopenable by AutoCAD, so I import into SketchUp and export as dwg, whcih can now be opened by AutoCAD.
- I've tried convtosolid to try to convert the mesh to a solid. Additionally, subtract doesn't quite work.
I suspect this is related to the type of object the imported dwg is (is it a mesh or a surface?). how to proceed with my goals.
AutoCAD 2013 :: Keeping Object In The Background
Mar 22, 2013I have a Tiff file and it is constantly trying to jump from the background to the foreground… I have tried putting it on layer and locking the layer in 2012 but this is no longer working in 2013.
View 3 Replies View RelatedAutoCAD 2013 :: Object Grouping Disappears
May 24, 2012I use object grouping for several different things in AutoCAD. With the release of ACAD 2013 I occasionally get the following message upon opening a drawing:
Associative Network Evaluation Error
The object cannot be resolved or value limit has been exceeded.
Inconsistent associative objects my display geometry and grips incorrectly and update in unexpected ways when edited. You can undo to restore the associative object to its previous state.Upon receiving this message, all groups have been removed from the drawing.
AutoCAD 2013 :: Create 3D Solid Object
Jan 23, 2013Creating object in 3D solid? The circles have the same height in both edges.
View 6 Replies View RelatedAutoCAD 2013 :: How To Edit Object Properties
Oct 4, 2013My Acad experience is very old-school, and I have been away from true Autocad for a number of years.
I have been attempting to edit the properties of objects in the block editor and ran into a problem.
+ I select an object.
+ Right-click and choose Properties.
+ A list of properties is displayed, but they are not for the object I am trying to edit.
I did a test by selecting the object and using the command prompt, used the CHPROP command to change the objects color. It did change color as expected.
However, when I used the right-click/properties method, the properties shown do not show the new color. So, I suspect that my right-click/properties method is not showing me the object's properties. But, rather the default properties when any new objects are created.
So, obviously right-clicking is not the way to get there. What am I missing?
AutoCAD 2013 :: Object Cycling Using CTRL Key?
Dec 3, 2012I often have lines drawn on top of other lines and need to cycle thru them to select the correct one. I always did this before upgrading to 2013 by holding the CTRL key and clicking on the lines. That doesn't seem to work on this version. I saw some recomenedations to hold the CTRL key and space bar at the same time but that still doesn't seem to work.It would be a huge time waste if I have to turn off layers everytime to just get to 1 line that I need to offset.
View 2 Replies View RelatedAutoCAD 2013 :: Creating Size Of Object
Dec 12, 2013I am creating flat patterns of sheet metal parts and i would like cad to do some calculations for me.
For example when i am creating an object , be it a rectangle or simply a line , i dont want to have to work out my sizes on the calculator then input the size to create the object. I would like cad to do the sum for me by inputting my sum straight into the dimension of the object i am creating. E.g CLick rectangle, select a start point and type 1200-375+37+37+10+10, Then tabbing to do a similar thing for the width
The way i draw flat patterns is to start with the overall size then chop into that shape to create a finished pattern. I also have used Inventor and a software for cnc punching called Cadman. Both of these programs you can do this and what with Inventor also being a creation of autodesk i would have thought this could be done in cad as well.
Is there an add on or a simple command that will let me do this.
AutoCAD 2013 :: How To Edit Imported DWG Object
Aug 4, 2013I've tried to import a dwg file that was created by someone else but I'm having a hard time editing it. I can scale it and move it and things like that, but if i wish to change the height. I tried scaling it, but it messes up the object. The object I am trying to shorten is a measuring rack on this site [URL].......
I can't change the objects height. Perhaps it's because it's a block reference or something. I've tried editing the block itself, but i have no luck in trying to edit the height. I cant splice it either.
I've attached the file im trying to change the height of.
AutoCAD 2013 :: Extended Data On 3D Object
Jun 13, 2013Is there a way to extract information (for an excel spreadsheet) for multiple 3D objects, without turning them into individual blocks?
View 2 Replies View RelatedAutoCAD 2013 :: Object Tracking Sensitivity
Jun 21, 2012I really like the object snap tracking feature to snap between 2 points intersecting but I find it overly sensitive and hard to get it right the first time.
Is there a way to turn down the sensitivity? I use this feature frequently.
AutoCAD 2013 :: How To Rotate An Inserted OLE Object
Nov 15, 2013When i insert an OLE i want to rotate it from vertical to horizontal, but the rotate button just moved the full image around a point.
View 4 Replies View RelatedAutoCAD 2013 :: Attempting To Hatch Object
Feb 28, 2013I am using AutoCAD MAP 3D and attempting to hatch an object. However when I click the hatch command I am getting an error in the command line _k Unknown Command 'k' Press F1 for Help.
Is there a way of resolving this or a list of things to test.
AutoCAD 2013 :: Move Only One Element Of Object
Sep 23, 2013I’ve got a student version (AutoCAD for Mac 2013) , which I got from official website. There starting to appear few problems after a few months of my work.
1. when I’m doing a rectangle, lines that intersect or just lines that contact, in the point of connection appear small blue rectangles and windows of mistakes. If I trying to move only one element of this object, all others elements start to deform in chaotic way.
2. when I’m coping any object on the same page in one file, program start to buzz and I need to close the program despotic.
AutoCAD 2013 :: 3D Object With Unconnected Edges
Sep 12, 2013In the attached file there is a single 3D solid object. But there seems to be several unconnected lines, out in space, that are part of the object, but un editable. By selecting individual edges (on the problem geometry) edges on the solid are also being selected.
View 6 Replies View RelatedAutoCAD 2013 :: Isolate Object Command
Mar 4, 2013With the Isolate Object command is it possible to have the objects that get hidden remain in the workspace "faded" like when editing a reference in place?
View 6 Replies View RelatedAutoCAD 2013 :: Text Is Appearing As OLE Object
Aug 27, 2013I have one text in AutoCAD 13 when i copy and Paste to AutoCAD 10 the Text is appearing as OLE Object.
View 3 Replies View RelatedAutoCAD 2013 :: Copy Object In X Direction Using Y Displacement
Nov 14, 2013If I am copying an object using snaps vertically down a wall a certain distance and come to a wall corner and then need to copy the object the same distance horizontally as I did vertically is there an easy way to enter this new direction? I keep thinking that I would just enter displacement and for X I should be able to use my mouse and snap/measure the old Y distance and then put Y,Z as 0. However, there is no option to get a relative distance in displacement. Is there something I am missing in the command?
View 8 Replies View Related