I am using AutoCAD MAP 3D and attempting to hatch an object. However when I click the hatch command I am getting an error in the command line _k Unknown Command 'k' Press F1 for Help.
Is there a way of resolving this or a list of things to test.
Just downloaded Autocad 2013 and am missing quite a few of the standard hatches (siding, soldier, board and batten, etc.) What should I do to get them back. When I open old drawings with these hatches in them, they load just fine...but I am unable to hatch any new areas with these hatches (because they are not listed in the hatch library)
View 9 Replies View RelatedI'm running Photoshop CS6 (13.0.1) 64bit on a MacBook Pro running OS X Lion. About 60% of the time when I try to double click a vector smart object instead of opening it up in Illustrator I get an error that says, "Could not edit original smart object because of program error." This most recent time it was a smart object from vector data I copied and pasted from Illustrator into Photoshop.
View 2 Replies View RelatedI am attempting to model an internal 1/8"-27 NPT thread, both the through hole and the tapered part of the hole are modeled, but after I draw the helix and the polygon and orient the polygon to the helix correctly, (or even if I don't, I have tried it) it keeps saying unable to sweep object. I am using Sweep with Alignment with the No option. If I select the polygon first, then click sweep, it works, but rotates the polygon so that what I get ends up looking nothing like a thread profile.
I have tried reducing the polygon radius down to a ridiculously small value, thinking it might have been interference due to a possible trig miscalculation, but with no success, still have the same issue. FYI, I am using a .037" turn height for 27 TPI and a polygon radius of .0214", with a helix small end radius of .177" and large end radius of .189".
I have been migrating dozens and dozens of .pat files from one version of AutoCAD to the next for many, many versions. Most recently in AutoCAD 2013 the .pat files were stored in the C:Program FilesAutodeskAutoCAD 2013SupportPatterns - worked fine. During the migration to 2014 I received an install error report stating that this subdirectory did not exist and could not be created. Alternately it stated that the new default path C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupport will be used instead.
At first I created the Patterns subdirectory where it could not be done automatically. No luck. Then I placed the Patterns subdirectory in C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupportPatterns and no luck.
I'm having a trouble with my hatches, every time I move an object contains a hatch, and some times when I re-open my DWG file, the hatch comes in front of the objects, is very annoying sending those hatches behind the objects all the time.
View 4 Replies View RelatedI've got some troubles to add some hatchs in a 3D solid, or a 3d face etc, in autocad windows, without .net addon.
I can add a hatch, but the hatch is on a plane at the bottom of the solid, but not around the solid.
Is there any ways to do this programmatically?
How to fix the error I'm getting when I try to hatch inside the object shown. Elevation seems correct, as far as I can be sure its a closed polyline.
Error - "Boundary not valid"
Hatch.dwg
I have converted Polyline to Hatch, how do I bring the Object Data from the Polyline to the Hatch as well?
View 1 Replies View RelatedFor some reason I can't change the hatch pattern scale prior to hatching an object although after placing the hatch I can. The procedure I am using is as follows in LT2011. Select hatch, set the hatch style, over type the scale say to 100, click inside the area to hatch. Immediately the hatch pattern scale sets itself back to 1 I then have to type 100 back in and then the hatching will be set.
View 0 Replies View RelatedHow do I get at the hatch objects within a drawing using iLogic?
I would like to be able to customize hatch color based on various part properties.
ie:
Purchased part = Green Hatch
Refrence = Light Grey
and much more
This would be possible if I can get to the hatch object and determin what part it is associated with.
I only see iLogic code that allows you to change visibility of all hatching, and set general hatch angle.
Since I can select a hatch in the drawing and change its color, I assume there is an un-published API object that relates to hatches
i have problem with hatch,if i delete any lines from related hatch protion object area, my all related hatch object erased.pls guide me how to solve problem.
View 6 Replies View RelatedI am using AutoCAD 2014 trial version. There are no hatch patterns included that I know of. Is there any way to experiment with genuine hatch patterns, cross, brick, stone, etc.
View 9 Replies View RelatedI am trying to write a script that will automatically hatch several drawings. The drawings contain an area in which there are several objects that need to be hatched. For each drawing the objects vary in location within the one area.I figured I would set up my script to encompass the area with the object select hatch technique. This works fine if the objects in the area have no Islands. However when an object within the "object select hatch area" contains Islands it shades the whole object ignoring the Island or if it does recognize an island it will create an individual hatch for it.
However when I use the pick internal point method the hatch comes out as expected for the object with the Islands in it.
I need to be able to snap som lines etc to some hatches. I have set Options - Drafting and unchecked "Ignore hatch objects" and OSNAPHACTH: 1 and it still doesnt snap.
View 9 Replies View RelatedAny wave hatch pattern of know where I can download one. I have already been to [URL]........ but the files are only gifs.
View 3 Replies View RelatedI'm trying to make a custom hatch using circles perforated metal, what that is but how to make a custom hatch with circles random circle holes on a sheet of metal. when i print out my CAD drawing the dimensions are gray and not very visible while the drawing is nice a dark and very visible.
View 1 Replies View RelatedSelecting the hatch by clicking it, It happens very often that we fail to select the hatch by clicking it.
How to ensure selecting that hatch by clicking it? Why the hatch is failed to be selected by clicking it?
A grip of a hatch is not snapped to another, In the attached screenshots, I tried to move the indicated grip to a target one but no “sign” for snaps is shown!
The screenshot and the dwg are attached. How these two grips can be snapped?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Here's a new one for me. All the hatch in a drawing file 'vanished'. Can't pick it, can't see it - layer is on and thawed.
I used FILTER to select all the hatches on the layer, and wblocked them out. File is attached, just rename from the .zip extension to .dwg
I still can't see them, or pck them. Auditing will remove the associativity, but that's about it. Still nothing to see.
Our engineering department users are facing this problem that the hatch patterns are not visible. Everytime they have to use the FILL command when they open any drawing. They are facing this problem with some dwgs, when anybody else opens the same drawing this happens again. After that they are unable to see the hatch patterns in any drawing. After using FILL it becomes visible but restrting the AutoCAD reverts the setting back so they unable to see the hatch pattern again. After opening that dwg in all files they are unable to hatch.
View 3 Replies View RelatedI'm getting a fatal error everytime I click on the hatch command on the home ribbon and then just press ESC before I do anything. This happens on command.. everytime. AutoCAD LT 2013 to see if they also get the same error.
View 7 Replies View RelatedI want to know how to make my own hatch from design till puting it in (*.pat) file. for info, I know how can I download such file and upload it in AutoCAd among (CUSTOM) or (OTHER PREDEFINED) hatchs as wel, or make it by using (SUPER HATCH in express tools). But to creat PAT file that what I want to know.
View 2 Replies View RelatedEvery time I try to hatch a larger area, my AutoCAD 2013 program freezes and I need to close the program and restart it, losing anything I hadn't saved prior to the freeze. In addition, certain areas won't hatch because the program is telling me I have open boundaries which is not the case.
View 3 Replies View RelatedIs it possible to hatch on a curved surface?
View 4 Replies View RelatedI have just made an Hatch ANSI32 on my drawing. This has a set of 2 lines each, but I would like to have 4 lines set.
View 6 Replies View RelatedIn AutoCAD 2010 I could just click between the grips and it would automatically add the vertex. Now in 2013 I have to hover over the spot between the grips. Is there a way to change that so the default on the center grip is set to add a vertex instead of stretch?
View 5 Replies View RelatedACAD LT 2013 continually crashes when i try to hatch anything.
View 1 Replies View RelatedI am working in AutoCAD 2013 on a .dwg drawing. There is a section of hatch that was exploded at some point and I want to set the individual hatch lines back to a hatch grouping, but since it was done long ago, using the undo command is not an option. It there a way I can take all of the individual hatch lines and group them back into a hatch?
My goal is to get the individual hatch marks back to a hatch group so that way I can use the hatch editor to modify the hatch style. Is this possible?
I need to create a cylindrical hatch. Is that even possible with AutoCAD 2013? It's for a non-rendered drawing so it needs to be a hatch, not a material etc.
View 2 Replies View RelatedHow to hide hatch grips,how the grips of hatch can be hidden.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
