How to fix the error I'm getting when I try to hatch inside the object shown. Elevation seems correct, as far as I can be sure its a closed polyline.
Error - "Boundary not valid"
Hatch.dwg
im trying to hatch a area inside a box but every time i try it says that there are gaps but they are within tolerance and give me OK or NO
if i select OK it hatches one i want and one beside it and the boundary it creates is all messed up
if i select NO nothing happens
ive tried to find out how to identify the gaps and ill ive found is to look for the red circles.. mine dont seem to display is there anyway to turn them on? or another way to show the gaps i have so i can close them i always draw with snap on
Hatch that includes grips inside,
The attached hatch includes grips inside it and thus as the lisp command “generate boundary from hatch multiple” is applied, more than one boundary is created
The dwg and the lisp file are attached
How to convert this sort of hatch to be uniform (without grips inside) so that the lisp command can create only one boundary for the hatch?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I don't give the right keywords with Google !?So from a classic selection (or ALL for ALL Blocks of the DWG) of entities,
we will keep ONLY blocks (Static or Dynamic)I am looking for a Lisp/VLisp routine to update all Color of Hatches inside Blocks when the Hatch Color is xxx If the color hatch is NOT XXX we don't update !
The problem : update all hatch from blocks where Color = 255 (or any other value)
---> other classic Color (1-256)
--> RGB Color 255,255,255 or any other
I don't know at all how to switch hatch entities from classic color to RGB color inside a Block..And dynamic block in Lisp/VLisp are far from my level 0.2 in Lisp ...
How do I drag to select over the top of objects without selecting and moving the objects under the mouse when I begin the "drag to select" motion?
View 2 Replies View RelatedThere are many examples of creating rectangular patterns, but not many, if any, of interrogating existing patterns.I have attached the files and a screenshot of a rectangular part inside an assembly. The part contains a rectangular pattern of holes and workplanes.how do I get hold of each proxy of the workplane in the pattern?In other words I don't know what to put in the for loop at the end of this code fragment:
If _invApp.Documents.Count = 0 Then MsgBox("Need to open an the assembly document") ReturnEnd If If _invApp.ActiveDocument.DocumentType <> DocumentTypeEnum.kAssemblyDocumentObject Then MsgBox("Need to have an Assembly document active") ReturnEnd If Dim asmDoc As Assembly Document asmDoc = _invApp.ActiveDocument Dim asmDef As AssemblyComponentDefinition asmDef = asmDoc.ComponentDefinition im occurrences As ComponentOccurrencesoccurrences.
[code]....
I'm having a trouble with my hatches, every time I move an object contains a hatch, and some times when I re-open my DWG file, the hatch comes in front of the objects, is very annoying sending those hatches behind the objects all the time.
View 4 Replies View RelatedI've got some troubles to add some hatchs in a 3D solid, or a 3d face etc, in autocad windows, without .net addon.
I can add a hatch, but the hatch is on a plane at the bottom of the solid, but not around the solid.
Is there any ways to do this programmatically?
why I get an error trying to hatch this. Its a closed Polyline.
Hatch issue.dwg
Edit: Or rather its 4 joined polylines.
I have a closed object and a line outside this object. I want to take anypoint on this polyline as a reference and check whether that point is lying inside the closed object or outside.
View 2 Replies View Relatedso im drawing a 3d object in an isometric view. it is a 3d extruded object. essentially it is an extruded decagonal tube. i have, at the bottom, a line marking the center of the decagon so i can snap to it, draw a decagon for the base, and extrude it. problem is, i go to draw the decagon (or anything, for that matter), and i cant snap to the inside of the solid. autocad will only let me select the face of the object. is this a setting i can uncheck, or do i have to change the way i am drawing this?
View 3 Replies View RelatedMy goal is to be able to store any object type (mainly an image jpg/bmp) inside a part that is not accessable through the normal user interface to be used with my addin.
I have been searching around and it seems like GetPrivateStream is the way to go.
Any working example of GetPrivateStream in vb.net and confirm if it actually stores the data inside the part.
I can't find a solution anywhere or any decent referencing material for this. If there is a better method of achieving this?
I am using AutoCAD MAP 3D and attempting to hatch an object. However when I click the hatch command I am getting an error in the command line _k Unknown Command 'k' Press F1 for Help.
Is there a way of resolving this or a list of things to test.
I'm getting a fatal error everytime I click on the hatch command on the home ribbon and then just press ESC before I do anything. This happens on command.. everytime. AutoCAD LT 2013 to see if they also get the same error.
View 7 Replies View RelatedWould you have a solution to accessing ODTables for a dwg object only loaded into memory? I have 1000+ dwgs that I want to return a string with the names of the various ODTable names for auding purposes that I would prefer to just side load rather than full load for performance reasons.
I'm attempting to use something like this (which works fine on an open drawing):
Public Function ReturnOBJData(acObjIDIn As ObjectId, intOffset As Integer) As String
'Don't forget that table is 0 based offset so....plan accordingly Dim strRet As String = ""
Dim acDoc As Document = Application.DocumentManager.MdiActiveDocument
Dim acDb As Database = acDoc.Database Dim acEd As Editor = acDoc.Editor
[Code] .......
In a fashion along the lines of
Public Function GetTables(strFileIn As String) As List(Of String)
Dim lstReturn As New List(Of String)
Dim acMapApp As MapApplication = HostMapApplicationServices.Application
Dim acActiveProject As Project.ProjectModel = acMapApp.ActiveProject
Dim acTableList As Tables = acActiveProject.ODTables Dim acTable As ObjectData.Table
[Code] ....
The problem is that I can't seem to link the ODTables object off of the memory database object. In this sample, the msgbox always returns a count of 0 where I would expect it to be in the range of 1-4.
I have converted Polyline to Hatch, how do I bring the Object Data from the Polyline to the Hatch as well?
View 1 Replies View RelatedWe are facing the problem of FATAL error while giving the HATCH command while using AutoCAD 2014 LT
We have successfully installed it on system and reinstalled it many times still the same problem , have attached the file for refrence.
Operating system is Windows 7 Professional 64 Bit
whenever you use the hatch command sends the message fatal mistake and closes the program.
already have the service pack 1 installed.
3 out of every 4 times I select a hatch, to edit properties or delete, AutoCAD gives me the FATAL ERROR message and cannot continue. It is not just in one file, but in any file from what I can tell. Not just imported hatches either, AutoCAD standard hatches as well. I have reinstalled, downloaded whatever service pack I could find. This is so harmful to productivity.
View 6 Replies View RelatedWe've been working with adding schedule tags in paper space for objects nested within an xref. The first time you do this however, the manual properties (it seems) do not update if the value of the manual property is changed back in the xref dwg. However, the Automatic properties do seem to update.
When we initially found this we past it off as a limitation. However, one of our users was experimenting and found that the first time you tag the xref resident object... the schedule tag reads the correct manual properties value. However, If you remove the property set from the schedule tag... then the manual property will update correctly showing the current value as it is back in the xref dwg even if it is changed.
This makes complete sense as the manual property set data can be edited from either the tag or the object or from the schedule... IF THE TAG and the object are resident in the same drawing file - in this case you DO NOT want to delete the property set from the tag... if you do this the property set is also removed from the object. However, when tagging objects nested within an xref, then you need to remove the property set from the tag... THEN the manual property will update correctly.
For some reason I can't change the hatch pattern scale prior to hatching an object although after placing the hatch I can. The procedure I am using is as follows in LT2011. Select hatch, set the hatch style, over type the scale say to 100, click inside the area to hatch. Immediately the hatch pattern scale sets itself back to 1 I then have to type 100 back in and then the hatching will be set.
View 0 Replies View RelatedHow do I get at the hatch objects within a drawing using iLogic?
I would like to be able to customize hatch color based on various part properties.
ie:
Purchased part = Green Hatch
Refrence = Light Grey
and much more
This would be possible if I can get to the hatch object and determin what part it is associated with.
I only see iLogic code that allows you to change visibility of all hatching, and set general hatch angle.
Since I can select a hatch in the drawing and change its color, I assume there is an un-published API object that relates to hatches
i have problem with hatch,if i delete any lines from related hatch protion object area, my all related hatch object erased.pls guide me how to solve problem.
View 6 Replies View RelatedWe are using a file created by another company and making additions to it for Interiors. While working in this file we have added some new layers and have begun to hatch new walls. While hatching some of these wall my boss received a message saying that the file had errors. He saved and closed the file at that point. When he re-opened the file a number of lines were missing from the file.
They appear to be completely random - i.e. parts of chairs are missing but not the whole chair, parts of walls but not whole walls. The things missing were not all on the same layer and were not necessarily items that had been hatched.
Note - we are running 2012 and the files were created in 2007
When ever I try to modify a hatch from a previous version I get a fatal error message and the program shuts down. I have opened the same files in 2012 and have no problem changing the hatch patterns.
View 1 Replies View RelatedI need to add a hatch fill polyline area but leave the text island out. What I did is put put Polyline ID and Text island ID into an ObjectIDCollection. The code doesn't throw any error but I can't see the hatch.
Public Function AutoCADAddHatch(ByRef newAddedHatch As Hatch, ByRef HatchElementIDs As ObjectIdCollection, ByVal HatchColour As Autodesk.AutoCAD.Colors.Color,
_ ByVal HatchLayerName As String, Optional ByVal PatternName As String = "SOLID", Optional ByRef strError As String = "") As Boolean
Dim db As Database = acApp.DocumentManager.MdiActiveDocument.Database
[Code] ......
I am trying to write a script that will automatically hatch several drawings. The drawings contain an area in which there are several objects that need to be hatched. For each drawing the objects vary in location within the one area.I figured I would set up my script to encompass the area with the object select hatch technique. This works fine if the objects in the area have no Islands. However when an object within the "object select hatch area" contains Islands it shades the whole object ignoring the Island or if it does recognize an island it will create an individual hatch for it.
However when I use the pick internal point method the hatch comes out as expected for the object with the Islands in it.
How would I put smaller objects inside a 3D object? I made a tube and wanted to fill it with little spheres. How to put the objects inside and shade them to look like they're in there.
View 4 Replies View RelatedI wonder if it's possible to achive an effect similar to repel text under but instead to put it inside an ellipse, for instanse with dynamic effect of decreasing the text size as the content text grows keeping it inscribed in ellipse.
View 3 Replies View RelatedOkay I have been a avid user of Photoshop for years and I mean well over 10 years now. And I thought why not try something new, plus I saw something that GIMP could do that Photoshop couldn't so I went ahead a downloaded the program, but since I am so used to Photoshop I sort of expected GIMP to be almost the same as Photoshop and well it isn't. (Don't judge me now) so I have a few questions on certain things.
1: How do you select an object inside the layer, with PS you can just ctrl click in the window and poof it's there around your selected item, But GIMP doesn't do that so how do you do that in GIMP?
2: When using the circle tool, I get this green box thing around the whatever it's called and I don't see any marching ants. What am I doing wrong and how do I get that to go away if it's possible?
3: where is the crop tool? What does it look like?
4: How come some of the options for the brushes won't allow you the change them? like for instance, if I go to windows>brushes and double click on any of the brushes another window pops open and it says: Brush editor read only. What does that mean? You can't make any of the brushes in spatter brushes?
How do I paste a pattern inside an object in Illustrator cc?
View 2 Replies View Related