AutoCAD LT :: 2013 Continually Crashes When Try To Hatch Anything?
Sep 25, 2012ACAD LT 2013 continually crashes when i try to hatch anything.
View 1 RepliesACAD LT 2013 continually crashes when i try to hatch anything.
View 1 RepliesHaving issues with Reference Manager - I can't add anything to it as it just goes into "Not Responding" mode and crashes? Is there a recovery/repair option for it?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
Due to some issues, I was told by HP support to update my display driver. I now have AMD Radeon HD 7950 but since installing this, Photoshop CS5 Extended and 64-bit keep crashing. I'm given the error:
Photoshop CS5 has stopped working
Photoshop has encountered a problem with the display driver, and has temporarily disabled GPU Enhancements. Check the video card manufacturer's website for the latest software.
GPU enhancements can be enabled in the Performance panel of preferences?
I have images that I export as a catalog from my notebook and external drive to my desktop . Did this all the time before the release candidate 4.1 without a hint of problems. With 4.1, it crashes 90% of the time....average export/import of a catalog I am running is about 3000 images. What is particularly wierd is that it crashes on multiples of 500. Normally first crash is at 500, the next at 1000 or 1500 and so forth.
View 3 Replies View RelatedJust downloaded Autocad 2013 and am missing quite a few of the standard hatches (siding, soldier, board and batten, etc.) What should I do to get them back. When I open old drawings with these hatches in them, they load just fine...but I am unable to hatch any new areas with these hatches (because they are not listed in the hatch library)
View 9 Replies View Relatedwhenever I try to hatch something the cpu crashes. It even crashes in a new drawing file with nothing in it but a rectangle.
View 3 Replies View Related3 out of every 4 times I select a hatch, to edit properties or delete, AutoCAD gives me the FATAL ERROR message and cannot continue. It is not just in one file, but in any file from what I can tell. Not just imported hatches either, AutoCAD standard hatches as well. I have reinstalled, downloaded whatever service pack I could find. This is so harmful to productivity.
View 6 Replies View RelatedI have been migrating dozens and dozens of .pat files from one version of AutoCAD to the next for many, many versions. Most recently in AutoCAD 2013 the .pat files were stored in the C:Program FilesAutodeskAutoCAD 2013SupportPatterns - worked fine. During the migration to 2014 I received an install error report stating that this subdirectory did not exist and could not be created. Alternately it stated that the new default path C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupport will be used instead.
At first I created the Patterns subdirectory where it could not be done automatically. No luck. Then I placed the Patterns subdirectory in C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupportPatterns and no luck.
I am using AutoCAD 2014 trial version. There are no hatch patterns included that I know of. Is there any way to experiment with genuine hatch patterns, cross, brick, stone, etc.
View 9 Replies View RelatedI need to be able to snap som lines etc to some hatches. I have set Options - Drafting and unchecked "Ignore hatch objects" and OSNAPHACTH: 1 and it still doesnt snap.
View 9 Replies View RelatedAny wave hatch pattern of know where I can download one. I have already been to [URL]........ but the files are only gifs.
View 3 Replies View RelatedI'm trying to make a custom hatch using circles perforated metal, what that is but how to make a custom hatch with circles random circle holes on a sheet of metal. when i print out my CAD drawing the dimensions are gray and not very visible while the drawing is nice a dark and very visible.
View 1 Replies View RelatedSelecting the hatch by clicking it, It happens very often that we fail to select the hatch by clicking it.
How to ensure selecting that hatch by clicking it? Why the hatch is failed to be selected by clicking it?
A grip of a hatch is not snapped to another, In the attached screenshots, I tried to move the indicated grip to a target one but no “sign” for snaps is shown!
The screenshot and the dwg are attached. How these two grips can be snapped?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Here's a new one for me. All the hatch in a drawing file 'vanished'. Can't pick it, can't see it - layer is on and thawed.
I used FILTER to select all the hatches on the layer, and wblocked them out. File is attached, just rename from the .zip extension to .dwg
I still can't see them, or pck them. Auditing will remove the associativity, but that's about it. Still nothing to see.
Our engineering department users are facing this problem that the hatch patterns are not visible. Everytime they have to use the FILL command when they open any drawing. They are facing this problem with some dwgs, when anybody else opens the same drawing this happens again. After that they are unable to see the hatch patterns in any drawing. After using FILL it becomes visible but restrting the AutoCAD reverts the setting back so they unable to see the hatch pattern again. After opening that dwg in all files they are unable to hatch.
View 3 Replies View RelatedI'm getting a fatal error everytime I click on the hatch command on the home ribbon and then just press ESC before I do anything. This happens on command.. everytime. AutoCAD LT 2013 to see if they also get the same error.
View 7 Replies View RelatedI want to know how to make my own hatch from design till puting it in (*.pat) file. for info, I know how can I download such file and upload it in AutoCAd among (CUSTOM) or (OTHER PREDEFINED) hatchs as wel, or make it by using (SUPER HATCH in express tools). But to creat PAT file that what I want to know.
View 2 Replies View RelatedEvery time I try to hatch a larger area, my AutoCAD 2013 program freezes and I need to close the program and restart it, losing anything I hadn't saved prior to the freeze. In addition, certain areas won't hatch because the program is telling me I have open boundaries which is not the case.
View 3 Replies View RelatedIs it possible to hatch on a curved surface?
View 4 Replies View RelatedI have just made an Hatch ANSI32 on my drawing. This has a set of 2 lines each, but I would like to have 4 lines set.
View 6 Replies View RelatedIn AutoCAD 2010 I could just click between the grips and it would automatically add the vertex. Now in 2013 I have to hover over the spot between the grips. Is there a way to change that so the default on the center grip is set to add a vertex instead of stretch?
View 5 Replies View RelatedI am using AutoCAD MAP 3D and attempting to hatch an object. However when I click the hatch command I am getting an error in the command line _k Unknown Command 'k' Press F1 for Help.
Is there a way of resolving this or a list of things to test.
I am working in AutoCAD 2013 on a .dwg drawing. There is a section of hatch that was exploded at some point and I want to set the individual hatch lines back to a hatch grouping, but since it was done long ago, using the undo command is not an option. It there a way I can take all of the individual hatch lines and group them back into a hatch?
My goal is to get the individual hatch marks back to a hatch group so that way I can use the hatch editor to modify the hatch style. Is this possible?
I need to create a cylindrical hatch. Is that even possible with AutoCAD 2013? It's for a non-rendered drawing so it needs to be a hatch, not a material etc.
View 2 Replies View RelatedHow to hide hatch grips,how the grips of hatch can be hidden.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I need to remove Hatch boundarys. I have tried Hatch Edit - Remove boundarys. Then AutoCad wants me to select Select object or..
I cant seem to select anything in this option?
When doing a match properties from one hatch to another, I end up with two hatches having identical properties (pattern, scale, etc) but that look completely different. See the attached image.
I tried the old snapbase trick and also tried various hatch origin settings, but without success.
Is there a way to convert hatches to surfaces?
I think surfaces can be seen in Sketchup but not hatches. Thats why i want to convert them.
Is there a way to bring hatch patterns from AutoCAD Architecture into AutoCAD?
View 3 Replies View RelatedIs it possible to bring hatch above all the other objects and cover everything there is below? Even if I go from hatch edit to draw order and bring it to fornt the elements below hatch are still visible also transparency is "by layer" and is set to 0
View 6 Replies View Related