AutoCAD 2013 :: Extended Data On 3D Object

Jun 13, 2013

Is there a way to extract information (for an excel spreadsheet) for multiple 3D objects, without turning them into individual blocks?

View 2 Replies


ADVERTISEMENT

AutoCAD 2013 :: Geometrical Data Extraction From 3D Object

May 28, 2013

I wish to extract geometrical data from autocad 3d object (mostly poligons), like length, height and width. I can see them in the property of a single object, but when I want to extract them into a table or into an external file, I can't find them.

View 5 Replies View Related

AutoCAD Map 3D :: Import Point Data With Object Data?

Jan 20, 2011

how to import point data that has Map Object Data also attached to it? "import it by attaching to a data source".

Example: I have a bunch of manholes. Each MH has X,Y,Z, but also Type, Invert Elevs., Pipe Sizes, Pipe Materials, Pipe Directions, Structure Type/Material, etc. etc. etc. I may have point data representing MH's, airport runway ends, trees, anything you can imagine, with all kinds of data imaginable. 

I want to import this data directly into Autocad/Civil 3D as either Autocad points, lines, or closed polylines (I also have utility lines, parking lots, etc.- all with data associated with it), all with the data attached as object data. I know that anything more complex than points might be hard to explain here, so I am hoping at least for a solution on how to import points - I have 99,999 MH's and obviously I don't want to have to type all that data in one by one.

I basically suck at using sql server. I can get around using the Map workspace and the different tabs. I have never used FDO, and I am not even sure what it is.

I fooled it today by creating 99,999 Autocad points at the correct XYZ, attaching the correct object data to them, then exporting as a shp file. I went into the shp_name.dbf file and edited it to add the data I wanted by cutting & pasting from Excel. then I re-imported the shp file. but, this is a workaround at best.

Surely Map can import objects and their associated data fields, all populated with valid data! all I need is to know how to do it. I mean, if this is not something I can do directly using Map commands should I take the money I earned by surveying 99,999 MH's with my GIS data collector that allows me to assign 101data fields to each object I survey, and buy something better?

C3D 2012 on 64bit Win 7 all up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
LDT/C3D user since release 12

View 9 Replies View Related

AutoCAD Map 3D :: Transfer Link Data To Object Data?

Mar 28, 2013

I have a drawing with Objects that have both Object Data and Linked data in an Access database. I need to get information from the linked table to a new linked table for each object.

I have thought that if I get the necessary information from the Linked table record to the object data for each object, I could then convert the Object data to a new link and am looking for a way to copy the data from a field in the Linked Table to the object data.  There is at least one field common to both the OD and Linked Table record.

Is there any automated way to transfer this data?

View 5 Replies View Related

AutoCAD LT :: Transfer Link Data To Object Data

Jun 25, 2013

In my company, they have just upgraded the old version of Autocad LT 2004 to the new 2013 and we have created menu to make our job easy. I have try to transfer the menu file .mnc to 2013 but it's not working or I don't do it the right way.

View 4 Replies View Related

AutoCad :: Object Data To Attribute Data To Perfection?

Oct 15, 2010

I'm working in AutoCAD Map 3D 2008 and Autocad Civil 3D 2009.

The General Task:I want to convert the object data to attribute data so that I can export it to an Excel file, add another column of data, and then import that new data as attribute data.

The Specific Task:I have thousands of campus water meter locations (a block with a small icon, attribute data, and object data) that belong to two different systems, domestic water and lake water. Each of these blocks has object data item (a barcode tag) that I want to show as a label next to the block.

However, before I do that, I want to export that barcode data to an excel file so I add a column (eventually a new piece of attribute data) that says whether or not that specific water meter is radio read or manually read. I want to then import that radio read/manual read excel file back into autocad and have an X appear on the block icon if it is radio read. I also want the barcode information to show up as a label.

My problem:I can't get the barcode object data to export with the locations in one easy excel sheet that I can simply import after I have made my changes.

Find some person on here who knows how to convert object data to attribute data.

View 9 Replies View Related

AutoCAD VB :: Extended Data In Properties Palette

Mar 20, 2012

Possible to add custom fields to an AutoCAD object and be able to view those fields and contens in the extended data tab on the properties palette?

If it's not possible with VBA is it possible with .NET?

View 1 Replies View Related

AutoCAD Civil 3D :: Survey Point Extended Data

Jul 5, 2012

I am wondering if it's possible to have a point code automatically add data to a user-defined field either in the survey database or in a drawing.  For instance, our surveyors currently will code a catch basin as CB INV2.2 if it has an invert depth of 2.2'.  I have a survey point user-defined property called InvertDepth.  Is it possible to get the survey database to automatically add 2.2 to that user-defined property or does that have to be manually input?  I have an expression and a label style that will take the elevation shot and subtract the depth number to give me the invert elevation on a lable, but I'd like to see if this can be done automatically without having to manually type in the depth on every point that is a catch basin or other inlet.

I've looked into the description key-set's parameters, but they seem to be mostly for display purposes and writing a full description.

View 6 Replies View Related

AutoCAD 2013 :: Embed Data In Table So That User Can Select From Group Of Data Within One Cell?

Oct 24, 2013

Is it possible to embedd data in a table so that a user can select from a group of data within one cell?

I use this technique quite often in Excel.  One cell in a table can have various values: A, B, C, or D.  While another cell can have a different set of values to choose from:  BLUE, RED, ORANGE, or PURPLE.  The user can pull down an arrow (similar to a dynamic block) and choose from a set list of values.

View 2 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Adding Point As Extended Data?

Jan 29, 2013

I was trying to add a point as extended data to a block.

Therefor i used this data but i get an error every time:
 
(setq lastent (entget (CAR (entsel))))(regapp "list")(setq exdata '((-3("list" (1011 . 3277.82) (1021 . 5782.5) (1031 . 369.5) ) ) ))(setq newent (append lastent exdata))(entmod newent)

View 3 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Extended Data On 2D Entity - Filter List

Apr 30, 2012

I use extended data on 2d entity in AutoCAD 2010. In a lisp program, I have filtered with extended data selection. Filters work with entity like: line, polyline and Mline but with insert entity it don’t work.

The end get result for a block :

((-1 . <Nom d'entité: 7ffffbe7d90>) (0 . "INSERT") (330 . <Nom d'entité: 7ffffb039f0>) (5 . "18CA91") (100 . "AcDbEntity") (67 . 0) (410 . "Model") (8 . "Fam_POTEAU_ROND_INSERT_021") (100 . "AcDbBlockReference") (2 . "POTEAU_ROND") (10 155239.0 -100209.0 0.0) (41 . 16.05) (42 . 16.05) (43 . 16.05) (50 . 0.0) (70 . 0) (71 . 0) (44 . 0.0) (45 . 0.0) (210 0.0 0.0 1.0) (-3 ("CREEMET000" (1000 . "Fam021") (1040 . -14.0) (1040 . 434.0) (1071 . 0)) ("CREEMET001" (1071 . 2) (1071 . 3) (1071 . 0)) ("CREEMET014" (1000 . "Poteau rond mixte (a completer)")) ("CREEMET002" (1000 . "_0_0_0_0_0_0_0_0_0_0_0_0_0_0_0_0_0_0_0_0_-1_-1_-1"))))

The filter list use :

((-4 . "<OR") (2 . "POTEAU_ROND*") (-4 . "OR>") (-3 ("CREEMET002" (1000 . "_0_0_0_0_0_0_0_0_0_0_0_0_0_0_0_0_0_0_0_0_-1_-1_-1"))))

View 3 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Extended Entity Data Lost In Files

Jan 2, 2013

Just recently I have noticed a Major problem occurring with Xdata.  My programs that i use XDATA storage in work fine until you save the drawing.  When you call the file back up the Xdata is gone the only thing in the xdata is NameSpace value.  Is this related somehow to a Windows update?

View 2 Replies View Related

CorelDRAW X6 :: Stack With SVG Data Object In Object Manager

Apr 3, 2013

There is problem with my CorelDRAW X6.

After I import different files in my working file, it's getting hard to work- RAM(16GB) is getting completely full and its almost unworkable!
I checked out Object Manager and found stack with "SVG data" and "Locked SVG data" object there under some basic shapes.

Stack is about from 10000 to 100000... Some times even more, but its not possible to select all them because Corel just stops. What is that-  "SVG data" and "Locked SVG data" object and why they are so many there?

View 5 Replies View Related

Photoshop :: Can't Animate 3D Object In CS6 Extended?

Jun 6, 2012

In CS5 to animate rotation of a 3D object, e.g. a sphere, I would set a '3D Object Position' keyframe at the start of the animation timeline, another at the end and enter the number of degrees rotation into the appropriate axis text box. The layout is a bit different in CS6, so I might be missing something,

but this does not work for me. If I enter a value in the rotation box the object will rotate to that position, but as soon as I press enter or move the focus to a different box the image goes back to its initial position. On further testing the same applies to translation and scaling on the animation timeline. The same behaviour occurs where the movements are input by dragging in the image rather than text input.
 
If this is done without the timeline the rotation/scaling etc works fine either by text input or by dragging. However, in this situation it appears that it is impossible to set a rotation 360° or greater. The number of degrees is reduced modulo 360 so, for example, 480° becomes 120° and 360° becomes 0°. If animation inputs were working correctly and this behaviour applied it would prevent animation of a full rotation because entering 360° would become 0°. Similarly for animating greater rotation e.g. one-and-a-half turns would only animate 180°.

View 6 Replies View Related

AutoCAD Map 3D :: Copy Object Data

Aug 28, 2002

I have object data attached to some linework and I want to copy that data to some new entities.Is it possible to copy object data from one entity to another with out having to fill in the table again.

View 3 Replies View Related

AutoCAD Map 3D :: Name Polylines With Object Data

Jun 9, 2011

We need to take polylines from AutoCAD Map 3D to 3ds Max and rename each polyline to have a name of something like "Building Number-Room Number", both of which are defined in our properties for each polyline. Because none of this data is kept on import to Max, we need to do this all in Map 3D, which we are not experienced with. Is there a way to do this, and if so what? We are importing the .dwg files in Max with polylines as splines.

View 2 Replies View Related

AutoCAD .NET :: Get Table Name Of The Object Data

Jan 27, 2013

How can I Get table name of the object data of a selected layer, with C#.

View 4 Replies View Related

AutoCAD Map 3D :: Transferring Object Data

Feb 1, 2011

I have an object with an Object Data Table attached filled in with information.  Is it possible to copy the table and information from that object to another object?  Tried the obvious, Match Properties, and it did nothing.

View 3 Replies View Related

AutoCad :: Extracting Data From 3D Object In A Tab

May 28, 2013

how to extract geometrical data (lenght, width, height) from 3d object to a tab or an external file?

View 0 Replies View Related

AutoCad 3D :: Extract Data From 3D Object

May 27, 2011

is there any way to use data extraction and get the dimensions of the solid. Using dynamic blocks on 3d solid is not an option as far as i know. I tried using block with attributes and field which refer to a dimension line but it's too complicated and takes far more time than just check them by hand.

View 0 Replies View Related

Photoshop :: How To Render 3D Object During Animation In CS6 Extended

Mar 11, 2013

How do you render your 3d object during animation in photoshop cs6 extended.In my animation, there is no rendering. 

View 6 Replies View Related

AutoCAD Map 3D :: Display And Edit Object Data Of DWG

Feb 28, 2011

i have imported a shp file into dwg with their attribute.

how i can display any fields(BLGDID) in autocad dwg. and can i edit this by simply double click editing. can it update in object data's same field.

i  dont want to use ADEEDITDATA but task is same .

any simple way

View 5 Replies View Related

AutoCAD Map 3D :: Combine Object Data Tables?

Jun 12, 2013

A large combined file in our GIS format corrupted. I dug out all the old files that were originally used to create it but they are too old and will not combine in the GIS.

I exported each one to SHP, and then imported all of them into civil 3d as shp files, creating object data. This meant that I could correct the corrupted sections, which I have done, but now I need to get it back into the GIS program with the object data intact.

The problem is that the object data, coming from several combined files, is in several tables. Each table contains the same identical fields. (eg every table has a field called drawing)

I need to combine those tables so that I can re-export the shape files. I need one table with all of the object data in it.

View 9 Replies View Related

AutoCAD Map 3D :: Displaying Object Data In The Drawing?

Dec 14, 2001

I have a AutoCAD MAP drawing with the pipe size assigned as object data to various lines in the drawing.

Is it possible to display the pipe sizes as a text entity parallel to the line? How would I go about doing this. First prize would be if the value of the text changed whenever the object data is changed.

View 6 Replies View Related

AutoCAD Civil 3D :: Select By Object Data?

May 22, 2013

We have a perenial problem with our old GIS software where files corrupt and drawing objects are lost.

There are few export options available, but export to shape is one of them. This means that I can export a damaged file and then import it into CAD with the layers intact and the tagged numbers (similar to object data or a block attribute in CAD) imported as object data. In order to make a new uncorrupted version for the GIS program.

Is there a way to select objects by object data?

If a file is corrupted, the only real way to repair it at the moment is to go back to the original cad drawing and reimport and then retag every single tagged attribute on what can be thousands of drawing objects, and by then we may no longer have the handdrawn data to even do that.

The next workaround is if I creat new dwgs from the cad drawing, Each one containing the objects with the same object data, and each saved with a file name that matches that object data, and then reimport into the GIS. (it can use the filename as a tag). This creates a new GIS file with the surviving information that should not lose any more data and we may be able to patch the 'holes' afterwards.

The problem is selecting all the polylines in the cad drawing that have that same tagged number in the object data. Select similar just goes on object type and layer. This would be easier if I could select by object data and get everything with the same tag in one go.

A way to batch create the new dwgs from that selected data would be nice too.

C3d 2013

View 9 Replies View Related

AutoCAD .NET :: Display Object Data And Also Add New Features To That Table

Sep 7, 2012

How can I display the object data in a grid with vb.net and also add new features to the same layer along with the object data.

View 3 Replies View Related

AutoCAD 2010 :: Unable To View Object Data

May 28, 2013

This is an AutoCAD 2011 related question about being unable to see under properties objects that I have attached to polylines in AutoCAD Map3D.

I have created an map3d .dwg that the polylines and points have attributes attached (objects). However, when I access the same file in plain AutoCAD nothing appears under properties.

Is is a format, import settings tweak or simply it can not be done?

View 1 Replies View Related

AutoCAD .NET :: How To Compare Two Drawing File With Object Data

Apr 25, 2012

How to compare two drawing file with object data(two version of the same drawing) . Any source code (C# Arx) then will be much better.

View 7 Replies View Related

AutoCAD Map 3D :: VBA - Changing Column Definition Of Object Data

Jan 23, 2006

I have used the example of Map Object-data. I try to change the Object-data definition from a character to integer to do other querys.

How Do I have to Change the Column definition of the object-data? Where I have to add the definition "as integer" or "as long"?

Set amap =
ThisDrawing.Application.GetInterfaceObject("AutoCADMap.Application")
'Create OD Table Definition
Set ODfdfs = amap.Projects(ThisDrawing).MapUtil.NewODFieldDefs
' Add Column Headings and Defaults

[Code] .....

View 1 Replies View Related

AutoCAD .NET :: Update Xrecord Data Attached To NOD Or Object

Jan 24, 2011

Question, Is it possible to update values stored in an xrecord. If not what is the best aproche my goal?

View 1 Replies View Related

AutoCAD Map 3D :: Object Data Not Coming In Properties Window

Apr 4, 2012

I am using AutoCAD Map 3D 2009. I am not getting the object data values seen in the properties window in one of my machine. The other machine I am able to get the object data in the properties window.

I have attached screen shot of the machine where the object data can be seen in the properties window.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved