Photoshop :: Can't Animate 3D Object In CS6 Extended?
Jun 6, 2012
In CS5 to animate rotation of a 3D object, e.g. a sphere, I would set a '3D Object Position' keyframe at the start of the animation timeline, another at the end and enter the number of degrees rotation into the appropriate axis text box. The layout is a bit different in CS6, so I might be missing something,
but this does not work for me. If I enter a value in the rotation box the object will rotate to that position, but as soon as I press enter or move the focus to a different box the image goes back to its initial position. On further testing the same applies to translation and scaling on the animation timeline. The same behaviour occurs where the movements are input by dragging in the image rather than text input.
If this is done without the timeline the rotation/scaling etc works fine either by text input or by dragging. However, in this situation it appears that it is impossible to set a rotation 360° or greater. The number of degrees is reduced modulo 360 so, for example, 480° becomes 120° and 360° becomes 0°. If animation inputs were working correctly and this behaviour applied it would prevent animation of a full rotation because entering 360° would become 0°. Similarly for animating greater rotation e.g. one-and-a-half turns would only animate 180°.
I am trying to animate the rotation of an object whenever it comes close to another object.
For example object 1 is the needle of a compass, I want it to point straight up whenever it comes close to object 2 (a magnet).
I need this to work regardless of where these objects are in world space. The only thing that matters is that they be next to each other; i.e. just like a real compass and a real magnet. I thought maybe I need a proximity sensor but I can't find any good tutorials on that.
I was wondering whether I can animate an engineering drawing of a vehicle over a longsection (X-Y Plane) of a road without expanding add-ons ($) on Civil 3D package
Senior engineers in our department aren't quite concerned using transparent template over printed plan but I reckon it's primitive and a waste of resources and time.
I've seen videos and forum posts about using scripts but I can't quite see the post I would like to see.
So what I would like to do would sum up as section drawing of a vehicle moving through a drawn polyline. No gimmicks (wheels turning, indicate scrapes) required.
I am modelling a Domestic Pump with tubes hanging out of them (I've made the model of the pump itself already), the tubes themselves is what I want to animate.
how to make the tubes using the Line Tool and increasing the thickness which would result a nice long tube However my problem is, is that how do I get to have the Line (or Spline?) directly attached to a certain point on my Domestic Pump model to make it look like it's part of it and moves along with it (and not having to keyframe it's movement precisely and all the time)? in addition, to animate it afterwards as well without it being detached from it.
If any of you are having difficulty imagining what I'm talking about, think of it as a Hoover (Vacuum Cleaner) with a Hose Pipe that needs to move freely through the use of a
I'm trying to move an object 10 px left or right depending on which button they click on.
Ex. Click Button A and a square will move 10 px left. Click Button B and the same square will move 10 px right. Click Button B three times and the box will move 30 px right.. etc..
Also is there a wiki or faq sheet of all possible actions?
I have created a rectangle object with top right and bottom left corners set to 90px. I have an image that goes inside the box in the bottom left corner. The problem is I need the box to act as if it is using "Overflow Hidden" so I can position the image in the corner and have it partially "cut off" to fit the corner but It doesn't seem to be working when I set the overflow to hidden on the rectangle.
Also (part of my previous post earlier), is there a way to add/change the CSS code generated by Edge without messing anything up?I can write this in CSS and add it if I knew where and how (although I'd rather do it within the Edge interface).
Currently I am running PhotoShop extended CS5, 64bit. in which i have my fovorite plugins (Topaz, Nik and OneOne) running perfectly.
I have upgraded to Adobe Creative Cloud and installed PhotoShop extended CS6 using Adobe Application Manager as recommended. It didn't ask me if I wanted to upgrade or do a new install for PhotoShop. So now I CS6 running with no Plug-ins. I need my plugins! LOL.
I tried pointing to additional plugins in the CS6 preference to the CS5 plugin folder. Upon Launch it gave me a whole slew of error messages saying something cant load or launch C+ runtime error or what not. It does open up, but it only gives access to Nik and Topaz. OnOne doesn't show up under filters or extensions.
So, what are my options?
Just copy the plugins from CS5 to CS6?
I dont't want to reinstall all the plugins to CS6 if I don't have to as I've auto updated them over time to current versions online, so only have installation files for my original purchases.
I'm working on this study and I need to change the color of an object inside a symbol when I click another object.
The object is called "bola", wich is inside the symbol "ponto" and the clicking object are the colored pencils (each pencil should change the color of the symbol's object, giving the impression you'd selecting a different pencil to draw).
I think it's simple to understand what I mean when you see the files.
I already tried this line on click event of the pencils, but it didn't work:
I am looking for a way to import a sequence of images that represent an object spinning. I'd like to be able to import these onto the timeline and have it play thru the images by turning them on/off at the correct time. I basically want to do the same way that you can do in Flash when importing an image sequence.
I have an svg layer in the shape of a bird and a background sky. I want my animation to load and then the user be able to drag the bird around the touch screen on a defined but hidden path.
I'm happy with the NX version, but if I want to upgrade to XT, how do I do it? I looked on the upgrade options for XT and upgrading from NX, is not there.
1. crolling like where you have buttons for example or press on a navigation bar tab, then it goes to that specific pace of the page, for a one page website, for example some sites you press on contacts and gose down to the bottom of the page where the contacts place is located, not opening a new link.
2.Second, navigation bar, where it fallows the scroll as it gose down, like for example when it is html the object is fixed to the top, and when you scroll down it will fallow it it,
3.I need Parallex scrolling where you can have the timeline or animations run while you scroll in the meantime and have animation running all the time, for example the infographic site where the bees are fluying but still have seperate animations while you scroll
4.I would also like to ask if like looping each animations sperately, not looping the whole timeline, can it be possible to loop an animation while you have all the interactivity witht he site like looping seperately all the time, without interfeering with all the other animation
5.I also are wondering if you can create multiple pages on one animate project, like multiple pages with html
I just moved on to edge animate from html, and html was also beirf learn for me and mostly i was doing design work, and i thought getting out of graphic river and moving on the theme forest.
I want also all the five things to work on one aimate project.
Is it possible to get the text color to FadeIn or the opacity of the text color to animate with the lines of code below? I simply want the color to fade in when the mouse rolls over the text.
I'd like to animate snow falling. I assume Edge would be able to do this. Will it be possible to add it as a background? Or would it just be easier to add the effect to the top graphic portion of my page? I've used Edge back when it first came out. But havent' touched it in a while. I'm now working "in the Cloud". and I do use Dreamweaver.
I am including an animation I built using Edge Animate into Dreamweaver. I can't use an .oam file because of some other JavaScript I'm using so basically I'm limited to an .html file with all my edge includes java, and other supporting files.
when I preview in browser within dreamweaver. However, when I upload the page to my domain, my animate HTML file won't work. Here is a link to the current site in progress. (The first green box top left is my link to my animation). URL....
I have 280 extracted frames from a 12 sec. mp4 clip. I've cut-out the main object to get rid of the background and saved all the files as png. How can I bring this to a HTML5 Animation to place it on a page that will be showed on ipad-air (no animated gif and no flash)
What the best way is to animate a progress bar with an increasing %. Seems like you would specify a variable set to 0 that is then incremented via javascript while an animation is going on.
I have an ordinary div I composed with HTML, that I'd like to import into an existing Edge Animate comp and have it treated like an ordinary div. The two closest things I saw were: a YouTube video of a whole page opening in EA, and divs animated within itThis other forum, which has more components imported than I need:URL...Isn't there some kind of pasting window somewhere?
So I created my own subscription form, I have it appear and disapear when you are on the button. And when you click on it, it stays. But how can a put in an action to add text to it?
I'm looking for a way to animate a link with a hover feature. I would like the link to be initally blank, but after hovering hover the link, a colored rectangle of sorts slides in from left to right, essentially creating a new background color. When the cursor moves off of the link, the colored rectangle in the background would slide back to the left, disappearing.
After some thought, initially it sounds like an animation of clipping masks. Not sure if this is possible in Edge, or if I am on the right track.
Another hover animation that looks as if it would be some sort of clipping mask is found here on this site: [URL]....
I love the link to the right of the screen that says "Watch the trailer." It's a simple, beautiful animation that gives the site a great look.
I have an Edge animation with a dial which indicates a percentage value. I want the dial to animate from zero up to the correct percentage value. This percentage value will be calculated via PHP and supplied to the Edge animation.
So what I'm asking is can you specify the rotation value for an element dynamically (via code).
I did take a class for it in college so I know the basics, but still learning. I am trying to create a very basic animation where I have 2 assets that begin off the stage on either side. I would like the elements to slide in from the sides and meet in the middle with about a 20px overlap. I tried setting a keyframe for both elements at 0 seconds and setting the X translations to -2000px and 2000px and then setting another keyframe at 5 seconds and changing the X translations to 48% and 52% respectively. This got me the desired effect, but only because I have such a large monitor. If the browser window is resized or the screen is smaller, the effect does not stay the same due to using percentages to center the elements.
is there a way to animate elements to the middle of the screen without percentages(maybe by using margin:0 auto or something)? Or is there a way to accomplish what I am looking for so that the positioning of the elements is the same regardless of browser window size?
