Photoshop :: How To Change Dress Colors
May 2, 2011
I'm working on an online store for flamenco products. We have wide range of dresses and shoes and it's almost impossible to get good quality photos for all of them.
My main concern is that I would like to present all different color options in decent quality imagery. I was thinking of taking the best image for each and simply photo shopping the colors.
Seeing that I will have to do a lot of color options for a lot of dresses and shoes. Moderately quick, decent quality and adaptable to bulk photo shopping.
Basically meaning that I cannot put the care and detail I would if I just photo shopped a single image, I don't need high res pixel perfect quality. It should just look decent and I should be able to do it in a moderate amount of time.
View 9 Replies
ADVERTISEMENT
Jun 8, 2011
I have some photos of my wife in a dress that came out pretty nicely. The only issue is on the day we took the photos it had just rained and the bottom edge of the dress got wet.
I want to know if it is possible to use gimp to remove the water / wetness from the dress so that the photos look like the whole dress is dry.
Edit:
Attached Photo of the dress.
Attached File(s) IC-712.jpg (438.88K)
Number of downloads: 12
View 4 Replies
View Related
Oct 10, 2008
I'm trying to change the colour of a pink dress to red, blue, green etc. I need to keep the detail on the dress.
I also need to use exact colour codes - instead of just red, green etc from the colour chart. can this be done?
View 3 Replies
View Related
May 8, 2012
We are working with a company that will be sending us DWG files. They do not use the same layer colors as us and I am trying to find a lisp that would allow me to set up a table with the layer names and the color I want them to be so that I can quickly change all the layers to our companys color standards.
Example:
Layer 1 = Color 1
Layer 2 = Color 15
Layer 3 = Color 10
Etc.
I don't know a lot about lisp but I figure if I could find a lisp that did this I could plug in my layer/color assignments and it would work.
View 9 Replies
View Related
Nov 7, 2012
I had a formal a few weeks ago, and I went and ruined a photo which I really liked by going and spraying perfume on my dress and leaving dark patches.
View 5 Replies
View Related
May 23, 2006
I've read all the posts about color replacement, but I still can't get it right. I'd like to make the color of her dress gold to match the couch. I tried using the eye dropper,
View 9 Replies
View Related
Nov 17, 2012
When I try to use my brushes with actions in Photoshop, such as Save the Dress, Ying-Yang, or Foundation, they won't work. I've tried resetting the brushes, changing the opacity, restarting the program, and unlocking the layers. It was working perfectly, but suddenly just stopped. When I click on the image, it doesn't do anything. There is also a small black box next to the action the I am using in the history box. When my brushes were working, that box would show in white where I used the brushes on my pictures, but now it doesn't register anything that I try to do.
View 4 Replies
View Related
Aug 20, 2013
I stuck with designing box similar object. I want to "dress" object with honeycomb texture, but don't know how :/. I googled and found exactly what I want: [URL]........
View 2 Replies
View Related
Jun 27, 2012
It started yesterday evening. i had been working all day. today can't use CS6 PS at all as my job is painting an illustration. Where do I begin to sort this out? I did install Sugar Sync yesterday as per client request.
View 1 Replies
View Related
Jun 11, 2007
I have seen many a picture where it has been changed to black and white and only one chosen colour stays the same. Or sometimes it can be changed. In the photo below she was originally in normal colour and the bikini was blue. I would really love to do this with some shots of my wife but cant get the colour to work.
View 4 Replies
View Related
Oct 29, 2012
I have a picture with large area of color: #fffdfd, when I save it for web (jpg) this color is changed to #fefcfd (in JPG).
I just can not save as JPG with #fffdfd. (was trying uncheck convert to sRGB, do not embed color profile - always #fffdfd changes to #fefcfd when save for web)
However, color #fefcfd when save for web , does not change.
Why some colors change and some not? Is it a bug ?
Window7 64bit, Photoshop CS6
View 10 Replies
View Related
Aug 14, 2013
I need to change the color of head for this man from silver to blue (but not too blue, something to fit with header).But to maintain the overflow effect. (if possible)
View 2 Replies
View Related
Nov 25, 2003
Ok I am interested in changing the colors of cars. I.E. I have a 57 Chevy that I am not sure what color I want to paint and would like to use photoshop to help me decide. The only thing I can do is paint it with a flat color I would like to change it right from the actually pic. I can change the hue/ saturation but that also changes the background. Am I supposed to create a layer for the car itself? It seems that when I do that it doesn't do the same color for all of the body. The car right now has different color paint in the jpeg I am using. I could understand if it was just one color that would be easy but I can't seem to do it for multipule colors. But I have seen where guys that have the same color for one particuliar thing be changed for all.
View 9 Replies
View Related
May 13, 2004
Is it possible to change the background color of a completed image? I've created a minimal version of the Fire image for use on my jewelry site. The background color is clearly wrong. I still have the original PSD file that I created. How do I change the color so as to harmonize with the rest of the site?
View 4 Replies
View Related
Dec 12, 2004
how would you go about changing the color of cars?
View 2 Replies
View Related
Dec 14, 2008
I've been browsing around for a while and there is a lot of great info.
Here's my question:
How do I change the colors in the picture, but still make it look real?
View 1 Replies
View Related
Apr 28, 2007
how do change the colors of a regular photo, to the red, blue and green type.
View 2 Replies
View Related
Feb 17, 2013
How do I change the background colors in Elements 10?
View 3 Replies
View Related
Apr 25, 2013
I have a transparent logo. I've conferted it to RGB and tried using fill (it's primarily a single color except for some fading at the edges) but the results were not 100%. Rather than using Fill and leaving some scruff around the edges, can I just tell it to change ALL image bigs to a single color? How?
I am new at Photoshop.
View 4 Replies
View Related
Feb 19, 2013
I think I understand what View> Proof Setup does in Photoshop. It shows you a preview of what the image will look like with the chosen color space. But here is what I dont get. With an image open choose View>Proof Setup and then "Internet Standard RGB (sRGB)". Now close the image and reopen it. Choose View>ProofSetup again. Notice that "Internet Standard RGB (sRGB)" is already selected. Now, re-select the color space again and when you do pay very close attention to the image. Does it change colors? Mine does and that is what I am questioning. Why does it do that?
When I reselect the color space after opening the file, it changes color. Of course, if I select a different color space than what was selected when I open the file, it changes. I expect that.
View 4 Replies
View Related
Nov 12, 2012
A pop up message says Could not complete your request due to a program error. I am using the paintbrush tool, 150 soft round brush size. It will not allow me to change foreground and background colors or paint. What can I do?
View 2 Replies
View Related
Aug 29, 2007
I need to change the channels of about 10 layers at the same time, without loosing their colour relation to each other (so basically what you do with the image adjustments)...
But I need to limit it to a couple of layers in stead of the entire pic.. Ive tried adjustment layers, but they seem to applie to all the layers below them.. im probably applying it the wrong way right?
View 1 Replies
View Related
Aug 22, 2013
How do i change software screen colors?
View 1 Replies
View Related
Jul 16, 2013
Every time I've tried to change the foreground or background colors in PSCS6 it says "Could not complete your request because of a program error" What can I do?
View 2 Replies
View Related
May 16, 2013
when i reopen a doc with vector shapes on cs6 the shapes that have a gradient change the colors to a gradient made of the foreground and background colors that i had set in that moment:( like all the gradients turn grayscale, usually or any other 2 color combination i had. i dont want to rasterize or convert to smart objects the vector shapes.
View 5 Replies
View Related
Jul 23, 2013
I can not get colors for either program. They show all hotpink and will not respond to change.
Neither one works Elements2 was okay until I installed 8 then the color palettes locked to HOTPINK.
View 1 Replies
View Related
Jul 29, 2011
I accidently exited out of my color changing tool bar thing and now I can't change colors. How do i open up the colors again?
View 1 Replies
View Related
Nov 6, 2012
I bought this vector graphic on istockphoto and i cant figure out how to change the colors! When i attempt to change the colors of the end circles it just makes it a solid color...
View 6 Replies
View Related
Oct 9, 2012
I was making a bussines card, colors in corel looks perfect, exported to pdf file colors stays the same, but when i try to print all colors are off. Deep purple turns pink and black fading objects tuns into lines. Furthermore, when I use 'collect for output' pdf preset 'prepress' colors are off to and when I try to use 'current proof settings' corel just shuts down.
colors in corel
colors in pdf after 'colect for output'
and when I print it, colors are way more off, you can't even see the red, because all purple turns pink.
View 6 Replies
View Related
Jul 13, 2012
When linking in a revit mep 2012 into an architectural model is there a way to change the colors of the mep elements (ie. ductwork, piping etc.) to black or even to grayscale?
View 5 Replies
View Related
May 14, 2012
Is there a way to change a range of colors to another. Let say I want to change a pic with different shades of red to blue. Which tool would do the trick?
View 1 Replies
View Related
