AutoCAD 2010 :: X / Y Coordinate Green And Red Lines
Mar 28, 2012How the heck to you turn off these stupid green and red x/y coordinate lines in Autocad?
View 6 Replies
ADVERTISEMENT
AutoCAD LT :: Green Lines When PDF And Print
Oct 16, 2013I have AutoCAD LT 2014 and i have a drawing that i attached a picture to and have a few hatches over. When i go to PDF it and print the drawing it has green lines throughout and not just on the part of the attachment but over the entire page. How do i get rid of these? I dont see them in AutoCAD
View 9 Replies View RelatedAutoCad 2D :: Lines Are Non Coplanar - Z Coordinate Is Not 0
Feb 10, 2008I've been having a drawing problem at work lately on Autocad 2007. Some lines I draw cannot be filled so I have to trim them instead. The reason why is that these lines are not coplanar. I've also noticed that the Z coordinate is not 0 and have checked on the 3d View that lines are awfully not in the same plan. Does it have to do with the X-line?
View 9 Replies View RelatedAutoCAD Inventor :: What Are The Green Lines In A Title Block
Jan 1, 2013In the ANSI-large, the default title block in the ANSI drawing template, when i edit the title block i see green lines which might use for aligning text. they disappear when i finish editing.
They are on a layer that's: By Standard (title ANSI). The rest of the lines are black and are on the title ANSI layer. What's this By Standard prefix? What are they and how to make them?
AutoCAD .NET :: Getting Intersecting Point Coordinate Of Two Polylines (lines)
Jul 12, 2012I wonder if there is a way to get an intersecting point coordinate of two polylines(lines) programmatically.
For example, like in the below sample picture, I need to get coordinates of the points in the red cycles.
Is there any method that I can easily use?
Could I get a sample code snippet that computes the coordinates? (in C# & ObjectARX 2010 if possible?)
I've looked up "Through the Interface" and this disscussion group. couldn't find any useful yet.
Premiere Pro :: Green Lines On The Edge Of Video?
May 13, 2013I have a problem with premiere pro cs6 every time I export my video I get weird green lines on the left and bottom sides of my video. I'm working with different aspect ratios and frame rates in my timeline but I heard thats ok. This has been a pain since every thing is ok only the green lines on the edge of my video ruin my viewing experience.
View 4 Replies View RelatedAutoCAD 2010 :: Removing Z Coordinate From Entire Drawing
Jun 26, 2013I have a number of lines that will not fillet because they are non-coplaner. Is there a way to globally edit all the lines in a drawing to set the Z coordinate to zero rather than having to choose each line?
View 5 Replies View RelatedAutoCAD 2010 :: ASCII File With XYZ Coordinate Data
Nov 22, 2011I have a .PTS file (an ASCII file with XYZ coordinate data + two additional sets of info per point). Is there any way to bring this into AutoCAD natively?
View 7 Replies View RelatedAutoCAD 2010 :: Drawing A Line From Base Coordinate?
Jul 9, 2012We have a new PC set up, and the user is trying to draw a line, starting from point 0,0,0. AutoCAD won't let him draw a line from that coordinate.
How do we get AutoCAD to draw from the BASE coordinate? Is there a new switch that's messing this up?
AutoCAD 2010 :: Exporting Coordinate List From Imported SHP File
Jul 31, 2012It strikes me that there should be an easy way to do this, but it eludes me at the moment. I've used "Connect to Data" to attach a .shp file export from another software, specifically a Windmill computer model. The geometry and data comes through, but the table contains no coordinates, which is what my vendor wants. The drawing overlay's georeference info very closely (within our tolerances) and the Coordinate System is set.
How to suck that coordinate info off the drawing without spending a week clicking on each of 8600 points and typing LIST?
AutoCAD Civil 3D :: Coordinate Grid On Layout In 2010 Or 2011?
Nov 19, 2011how create coordinate grid on layout in Civil 3D 2010-2011, such as this
View 9 Replies View RelatedAutoCAD 2010 :: Coordinate System / Export Drawings To SHP File
Jan 23, 20121 How do I determine what coordinate system a drawing I have received has been prepared in?
2 I know how to export drawings to a .shp file but how can I export this drawing to a .shp file and ensure that coordinate system is maintained or otherwise changed for use in Arch GIS?
I have successfully exported the .shp file geometry previously but the cordinates system doesn't seem to match ARCGIS data sets. I am trying to establish is this an Autocad or ArchGis issue I suppose.
AutoCAD 2010 :: Drawing From Surveyor In Rotated Coordinate System
May 17, 2013I received the attached drawing file "A" from a surveyor that was created in an earlier version of AutoCAD (approx 2000). The attached drawing is rotated so that the view in Model Space shows the cross-hairs with north pointing northwest. There are points included within the drawing that do not match the coordinates of the surveyed points within the attached ascii text file. I would like to rotate the drawing so that the points match the coordinates in the ascii file and North follows the y-axis.
I have imported the points from the ascii text file into a new drawing file "B". I external referenced (overlay) the new drawing file B into drawing A. I tried moving all of the objects in the drawing file A (with MOVE) to a known point coordinate and then rotating (ROTATE) the objects to two known points. I don't know how to select all of the objects in drawing A and not the external reference in drawing B so that I may Rotate only drawing A objects.
How to move and rotate the surveyors drawing A so that I may match the coordinates in the ascii text file.
AutoCAD 2010 :: Data Link From Excel Turns Into Green Blob
Feb 1, 2013I'm inserting a data link from excel into my CAD drawing and every time I try to select the table it brings in, the corner "grips" the green plus signs, are so huge they are bigger than my sheet and I can't see anything in the table. Any way to shrink them to a rational size?
View 2 Replies View RelatedAutoCAD 2010 :: Drawing With PDF Underlay Plotted As PDF Turns Green When PDF Opened
Feb 8, 2011Using 2011 with a PDF underlay. When the drawing is plotted as a PDF and the new PDF is opened, parts of the PDF portion of thew drawing are green. Changing the transparency, contrast, fade etc. of the underlay hasn't worked. I don't want to save the PDF underlay as an earlier PDF version because I'm snapping to parts of the underlay.
View 7 Replies View RelatedAutoCAD 2010 :: Macros For Moving Text Based On Relative Coordinate
Oct 25, 2012I am using AutoCad 2012, with CADDUCT. On my runs of duct that go vertical, I like to stack my tag numbers beside the riser in order, so our installers can easily identify the order without a ton of section views. I am trying to figure out a macro that will do numerous things. Since my tags come out at different rotation angles, I would like to do the following commands.
Rotate object text "TAG #" to 0 degrees
move object text "TAG #" to "Snap from" & "snap insert" 6" below the tag above it
I want the numbers to align by their insert locations up and down the page, and exactly 6" on center vertically from one another. The tag numbers have a node justified to the center up and down of the text.
3ds Max Modeling :: UV Editor - Green Lines Running Around Object When Select Model Polys
May 15, 2013When opening the uv editor when I select the model polys, I have green lines running around the object. I'm guessing these are mapping seams automatically generated? but I'm not sure. I'm trying to add my own so rather than delete the green ones, I'd like to add to them.
View 3 Replies View RelatedAutoCAD 2010 :: Plotting Lines Using Compass Direction For Lines Angle
Apr 25, 2012i am doing a simple project making a survey plot for a piece of land that will be broken into subdivision. all measurements are of my starting point. after plotting the starting point i try to draw line that is 113 feet long and at a bearing of N 5d W i have no problem entering this data but when i hit enter it draws a straight line. now i know 5 degrees is much of an angle so i thought maybe it just looked straight and tried to plot the next point which was 542 feet from the last point at a bearing of N 39d E but once again after i put the info in and hit enter or space it would plot a line of the proper length but vertical, not the proper angle i need it at. here is how i would put in the info:
first i choose the lne command and choose my "beginning point" as that starting point for my line then i type 113<N 5d W for the length and direction and hit enter. when i do this it plots a vertical line of the proper length but wrong angle. what am i doing wrong? i have ortho set to off and idk what else to mess with
AutoCAD 2010 :: Wipeout To Turn Continuous Lines Into Dotted Lines?
Apr 23, 2012I was trying for an option with wipeout mask.
Is there any option with wipeout to turn the continuous lines into dotted lines instead of hiding the object? I have been working on one staircase block, i want to show half block as a dotted lines.. is there any way to do that without going in to the block edit and change? thats why am looking for wipeout mask option.
GIMP :: How To Remove Green In Green-red Leaf
Aug 31, 2012I've attached a leaf image. We'd like to "Autumnize" the leaf even more and remove the green from the leaf. I've tried playing with the various options in the Color drop down (Color Balance, Hue Saturation, Colorize, Brightness-Contrast, Threshold, Levels, Curves), but I can't seem to do it.
View 2 Replies View RelatedAutoCad :: Image Set In One Coordinate System Into A Drawing In Another Coordinate System
Mar 14, 2012how do i get an image set in one coordinate system come into a drawing in another coordinate system?
View 3 Replies View RelatedIllustrator :: How To Unite Red And Green Parts Of Leaf Into One Solid Green Leaf
May 21, 2012How to unite the red and green parts of the leaf into one solid green leaf? See attached “Leaf” file. (How do I attach the AI file?)
I tried the Pathfinder UNITE command and the Live Paint MERGE command.
AutoCAD VB :: OCS Coordinate System Of Block To UCS Or WCS Coordinate System?
May 28, 2012I want to know how to transform OCS Coordinate of A block object to UCS or WCS Coordinate .
It's Block's OCS Coordinate not other objects.
AutoCAD 2010 :: Why UCS Giving Lines
May 31, 2011SEE ATTACHMENT:
why my UCS keeps giving me these lines attached to my UCS. It not only attaches here but also on each of my Objects. It slows down the computer and the only way I can seem to get rid of them is by shutting down the program and reopening. Is there a quicker/more efficient way of fixing this issue?
AutoCAD 2010 :: Lines Not Appearing
Nov 14, 2012I was making a drawing and i don't know what i did but now anything i draw is not visible on screen although it is actually there because i can select it.
View 2 Replies View RelatedAutoCAD 2010 :: DWG TO PDF / False Lines?
Oct 12, 2012I have created a drawing with hatch that I would like to print in color not in grayscale. I have used dwg to PDF for many other plots and have not had an issue, but they were all in grayscale. With this dwg when I plot to PDF, the PDF writes lines into the drawing that do not exist in autoCAD. If I plot from AutoCAD the lines do not appear and I did not draw the lines in the dwg file. However, when I plot from the PDF it plots with additional lines all over the drawing. Is this because I am plotting in color and some of my layers have the transparency set for around 45?
View 9 Replies View RelatedAutoCAD 2010 :: Add Several Lines To The Same Constraint?
Feb 25, 2013I am attempting to Constraint a ling to a length. Can I add several lines to the same constraint, if so how would that be done.
View 2 Replies View RelatedAutoCAD 2010 :: How To Merge Lines
Mar 9, 2012As more and more clients, subs, etc., etc are requesting pdf's more and more often, the issue of "lines merge" vs. "lines overwrite" (and therefore, pdf "flattening" when printing a pdf) is becoming more of a topic of discussion in our office.
I know we're not the only office making pdf's that have to be "flattened" (thereby taking a huge amount more of time to print) when sending to a printer.... but not *all* pdf's we receive need to be flattened so there are some offices that don't have to deal with this issue.
The question is this:
If you use lines merge = on in your autocad, do you have a way to get pdfs that don't need to be flattened? (printing to dwf then pdf is not a reliable option either, as that does not consistantly honor the lines merge feature between dwf/pdf either)
If you don't use lines merge then how do you set up your drawings to allow for easy draworder handling? (and do you use solid hatching patterns in your drawings, which we rely on alot)
AutoCAD 2010 :: Annotative Lines With Thickness
Feb 12, 2013We are currently in the transition to Annotative Annotation (Dims, Text, etc.).
One obstacle that i have not been able to overcome are graphical elements where I need their thickness to adjust to the viewport scale. Graphic elements like (MatchLines, Property Lines, Limit of Work and Set Backs) these all have thickness to display prominently in our drawings.
Currently we are making duplicate copies of these lines and adjusting thier thickness but this defeats the purpose of having annotative lables etc.
I would like an annotative line with a thickness.
Ex. a 12" thick line thru a vport with 1/8" scale will print at 1/8" but the same line thru a vport at 1/16" will print at 1/16".
We would like the the line to maintain it's printed thickness (1/8") no matter the vport scale.
I have tried using the Line Width Display but that just makes a mess...obstructs the dwg when zoomed out, rounds the end of dashes etc.
AutoCAD 2010 :: Curved Lines Become Rough
Apr 15, 2012On 2012 and have run into a problem with curved lines...all curved lines circles etc. The intial draw properly but later when I go back to that portion of the drawing they are converted to rough lines...not a curve anymore segments of straight lines...cant seem to prevent if from happening.
View 3 Replies View RelatedAutoCAD 2010 :: Hidden Lines With 3D Object?
May 7, 2012Can I get AutoCAD to show hidden lines from a 3d drawing created in AutoCAD 2012?
View 2 Replies View Related